scholarly journals A more reasonable model for submarines rescues seat strength analysis

2021 ◽  
Vol 237 ◽  
pp. 109580
Author(s):  
Radosław Kiciński ◽  
Bogdan Szturomski ◽  
Łukasz Marchel
2009 ◽  
Author(s):  
Linda L. Moore ◽  
Daniel J. Van Ingen

2019 ◽  
Vol 2019 (4) ◽  
pp. 23-31
Author(s):  
Jakub Wilk ◽  
Radosław Guzikowski

Abstract The paper presents the validation procedure of the model used in the analysis of the composite blade for the rotor of the ILX-27 rotorcraft, designed and manufactured in the Institute of Aviation, by means of numerical analyses and tests of composite elements. Numerical analysis using finite element method and experimental studies of three research objects made of basic materials comprising the blade structure – carbon-epoxy laminate, glass-epoxy composite made of roving and foam filler – were carried out. The elements were in the form of four-point bent beams, and for comparison of the results the deflection arrow values in the middle of the beam and axial deformations on the upper and lower surfaces were selected. The procedure allowed to adjust the discrete model to real objects and to verify and correct the material data used in the strength analysis of the designed blade.


2018 ◽  
Vol 17 (8) ◽  
pp. 1855-1861
Author(s):  
Nicolae Taranu ◽  
Monther Abdelhadi ◽  
Ancuta Rotaru ◽  
Maria Gavrilescu

2018 ◽  
Vol 55 (1) ◽  
pp. 1-4
Author(s):  
Elena Felicia Beznea ◽  
Ionel Chirica ◽  
Adrian Presura ◽  
Ionel Iacob

The paper is treating the strength analysis of the main deck structure of an inland navigation catamaran for 30 passengers. The main deck should have high stiffness and high strength to resist to external loading and endure high stresses from combined bending and torsion loads. Different materials for sandwich structure of the deck have been analysed by using the Finite Element Method in order to determine the solution which accomplish better designing criteria regarding allowable stress and deformations and total weight.


2008 ◽  
Vol 73 (3) ◽  
pp. 424-438 ◽  
Author(s):  
Douglas J. Henderson ◽  
Osvaldo H. Scalise

The mean spherical approximation (MSA) is of interest because it produces an integral equation that yields useful analytical results for a number of fluids. One such case is the Yukawa fluid, which is a reasonable model for a simple fluid. The original MSA solution for this fluid, due to Waisman, is analytic but not explicit. Ginoza has simplified this solution. However, Ginoza's result is not quite explicit. Some years ago, Henderson, Blum, and Noworyta obtained explicit results for the thermodynamic functions of a single-component Yukawa fluid that have proven useful. They expanded Ginoza's result in an inverse-temperature expansion. Even when this expansion is truncated at fifth, or even lower, order, this expansion is nearly as accurate as the full solution and provides insight into the form of the higher-order coefficients in this expansion. In this paper Ginoza's implicit result for the case of a rather special mixture of Yukawa fluids is considered. Explicit results are obtained, again using an inverse-temperature expansion. Numerical results are given for the coefficients in this expansion. Some thoughts concerning the generalization of these results to a general mixture of Yukawa fluids are presented.


Sign in / Sign up

Export Citation Format

Share Document