Validation of Numerical Models Used for Designing the Composite Blade for ILX-27 Rotorcraft

2019 ◽  
Vol 2019 (4) ◽  
pp. 23-31
Author(s):  
Jakub Wilk ◽  
Radosław Guzikowski
Keyword(s):  
Epoxy Composite ◽  
Numerical Models ◽  
Experimental Studies ◽  
Strength Analysis ◽  
Laminate Glass ◽  
Composite Blade ◽  
Real Objects ◽  
Validation Procedure ◽  
Research Objects ◽  
Comparison Of The Results

Abstract The paper presents the validation procedure of the model used in the analysis of the composite blade for the rotor of the ILX-27 rotorcraft, designed and manufactured in the Institute of Aviation, by means of numerical analyses and tests of composite elements. Numerical analysis using finite element method and experimental studies of three research objects made of basic materials comprising the blade structure – carbon-epoxy laminate, glass-epoxy composite made of roving and foam filler – were carried out. The elements were in the form of four-point bent beams, and for comparison of the results the deflection arrow values in the middle of the beam and axial deformations on the upper and lower surfaces were selected. The procedure allowed to adjust the discrete model to real objects and to verify and correct the material data used in the strength analysis of the designed blade.

scholarly journals Additively Manufactured Parts Made of a Polymer Material Used for the Experimental Verification of a Component of a High-Speed Machine with an Optimised Geometry—Preliminary Research

Polymers ◽  
2020 ◽  
Vol 13 (1) ◽  
pp. 137
Author(s):  
Artur Andrearczyk ◽  
Bartlomiej Konieczny ◽  
Jerzy Sokołowski
Keyword(s):  
Polymer Material ◽  
High Speed ◽  
Numerical Models ◽  
Flow Analysis ◽  
Experimental Tests ◽  
Strength Analysis ◽  
Compressor Wheel ◽  
Operational Characteristics ◽  
3D Printed ◽  
Novel Method

This paper describes a novel method for the experimental validation of numerically optimised turbomachinery components. In the field of additive manufacturing, numerical models still need to be improved, especially with the experimental data. The paper presents the operational characteristics of a compressor wheel, measured during experimental research. The validation process included conducting a computational flow analysis and experimental tests of two compressor wheels: The aluminium wheel and the 3D printed wheel (made of a polymer material). The chosen manufacturing technology and the results obtained made it possible to determine the speed range in which the operation of the tested machine is stable. In addition, dynamic destructive tests were performed on the polymer disc and their results were compared with the results of the strength analysis. The tests were carried out at high rotational speeds (up to 120,000 rpm). The results of the research described above have proven the utility of this technology in the research and development of high-speed turbomachines operating at speeds up to 90,000 rpm. The research results obtained show that the technology used is suitable for multi-variant optimization of the tested machine part. This work has also contributed to the further development of numerical models.

scholarly journals Synergism of coupled subsarcolemmal Ca2+ clocks and sarcolemmal voltage clocks confers robust and flexible pacemaker function in a novel pacemaker cell model

2009 ◽  
Vol 296 (3) ◽  
pp. H594-H615 ◽  
Author(s):  
Victor A. Maltsev ◽  
Edward G. Lakatta
Keyword(s):  
Cell Model ◽  
Numerical Models ◽  
Experimental Studies ◽  
Cardiac Pacemaker ◽  
Critical Dimension ◽  
Pacemaker Cell ◽  
Pumping Rate ◽  
Rate Modulation ◽  
Wide Scale ◽  
Fail Safe

Recent experimental studies have demonstrated that sinoatrial node cells (SANC) generate spontaneous, rhythmic, local subsarcolemmal Ca2+ releases (Ca2+ clock), which occur during late diastolic depolarization (DD) and interact with the classic sarcolemmal voltage oscillator (membrane clock) by activating Na+-Ca2+ exchanger current ( INCX). This and other interactions between clocks, however, are not captured by existing essentially membrane-delimited cardiac pacemaker cell numerical models. Using wide-scale parametric analysis of classic formulations of membrane clock and Ca2+ cycling, we have constructed and initially explored a prototype rabbit SANC model featuring both clocks. Our coupled oscillator system exhibits greater robustness and flexibility than membrane clock operating alone. Rhythmic spontaneous Ca2+ releases of sarcoplasmic reticulum (SR)-based Ca2+ clock ignite rhythmic action potentials via late DD INCX over much broader ranges of membrane clock parameters [e.g., L-type Ca2+ current ( ICaL) and/or hyperpolarization-activated (“funny”) current ( If) conductances]. The system Ca2+ clock includes SR and sarcolemmal Ca2+ fluxes, which optimize cell Ca2+ balance to increase amplitudes of both SR Ca2+ release and late DD INCX as SR Ca2+ pumping rate increases, resulting in a broad pacemaker rate modulation (1.8–4.6 Hz). In contrast, the rate modulation range via membrane clock parameters is substantially smaller when Ca2+ clock is unchanged or lacking. When Ca2+ clock is disabled, the system parametric space for fail-safe SANC operation considerably shrinks: without rhythmic late DD INCX ignition signals membrane clock substantially slows, becomes dysrhythmic, or halts. In conclusion, the Ca2+ clock is a new critical dimension in SANC function. A synergism of the coupled function of Ca2+ and membrane clocks confers fail-safe SANC operation at greatly varying rates.

THE HEAP PARTS MOVEMENT ON THE SHAREBOARD SURFACE OF THE POTATO HARVESTING MACHINE

2021 ◽  
Vol 14(63) (1) ◽  
pp. 127-140
Author(s):  
Serhii HRUSHETSKYI ◽  
Vitaly YAROPUD ◽  
Ihor KUPCHUK ◽  
Ruslana SEMENYSHENA
Keyword(s):  
Mathematical Model ◽  
Experimental Studies ◽  
Separation Process ◽  
Kinematic Parameters ◽  
Quality Performance ◽  
Machine Operation ◽  
Degree Of Damage ◽  
Total Capacity ◽  
Comparison Of The Results

The article is devoted to the problem of the reduction of tubers mechanical damages while providing qualitative indicators of the potato heap separation process. Theoretical and experimental dependences of the influence of design and kinematic parameters of the machine operation on the quality performance are obtained. Within the field of experimental studies, a field installation was made to investigate the potato harvester as a whole on the efficiency of separation, the degree of damage, the magnitude of losses and the total capacity for aggregation. Comparison of the results of theoretical and experimental studies showed that the developed mathematical model of the process of separation of potato heap is adequate.

scholarly journals MHD-waves in the geomagnetic tail: A review

10.12737/7168 ◽  
2015 ◽  
Vol 1 (1) ◽  
pp. 4-22 ◽  
Author(s):  
Анатолий Леонович ◽  
Anatoliy Leonovich ◽  
Виталий Мазур ◽  
Vitaliy Mazur ◽  
Даниил Козлов ◽  
...  
Keyword(s):  
Numerical Models ◽  
Experimental Studies ◽  
Low Frequency ◽  
Detailed Comparison ◽  
Mhd Waves ◽  
Theoretical Studies ◽  
Geomagnetic Tail ◽  
Magnetopause Oscillations ◽  
Experimental And Theoretical Studies ◽  
Theoretical Results

This article presents the review of experimental and theoretical studies on ultra-low-frequency MHD oscillations of the geomagnetic tail. We consider the Kelvin–Helmholtz instability at the magnetopause, oscillations with a discrete spectrum in the “magic frequencies” range, the ballooning instability of coupled Alfvén and slow magnetosonic waves, and “flapping” oscillations of the current sheet of the geomagnetic tail. Over the last decade, observations from THEMIS, CLUSTER and Double Star satellites have been of great importance for experimental studies. The use of several spacecraft allows us to study the structure of MHD oscillations with high spatial resolution. Due to this, we can make a detailed comparison between theoretical results and those obtained from multi-spacecraft studies. To make such comparisons in theoretical studies, in turn, we have to use the numerical models closest to the real magnetosphere.

Analytical and Low-Order Numerical Modeling of Ball-to-Ball Contact Friction in Linear Ball Bearings and Ball Screws

2019 ◽  
Vol 141 (7) ◽  
Author(s):  
Bo Lin ◽  
Molong Duan ◽  
Chinedum E. Okwudire
Keyword(s):  
Case Studies ◽  
Numerical Models ◽  
Experimental Studies ◽  
Point Contact ◽  
Ball Screw ◽  
Contact Friction ◽  
Ball Bearings ◽  
Friction Behavior ◽  
Ball Contact ◽  
Low Order

Analytical and low-order numerical models are very useful for studying friction behavior of rolling element machine components like ball bearings and ball screws. This is because they provide generalizable insights into friction behavior at much lower computational costs compared with high-order numerical models like finite element analysis (FEA). While analytical and low-order numerical models in the literature are mainly focused on ball-to-groove contact friction, experimental studies have shown that ball-to-ball contact friction is also very important. This is especially true for linear ball bearings/guideways and ball screws which, unlike rotary ball bearings, do not typically make use of caged balls to prevent ball-to-ball contact. Therefore, in this paper, low-order numerical models for ball-to-ball contact friction in linear ball bearings and ball screws are developed. Furthermore, an analytical model for ball-to-ball contact friction in four-point contact linear ball bearing is derived by making simplifications to its low-order numerical model. Compared with ball-to-ball friction predictions from FEA models developed in ansys, the proposed numerical models are shown in case studies to be accurate within 7%, while computing at least three orders of magnitude faster. Moreover, case studies are used to demonstrate how the developed models can be used in practice, e.g., for the mitigation of ball-to-ball contact friction in linear ball bearings and the prediction of friction variation during the operation of a ball screw.

Determination of reactional cutting forces on a circular sawblade machine by using experimental studies and numerical modelling

2011 ◽  
Vol 226 (3) ◽  
pp. 775-784 ◽  
Author(s):  
N E Yasitli ◽  
F Bayram ◽  
B Unver ◽  
Y Ozcelik
Keyword(s):  
Numerical Modelling ◽  
Cutting Forces ◽  
Numerical Models ◽  
Experimental Studies ◽  
Cutting Parameters ◽  
Element Model ◽  
Natural Stone ◽  
Processing Plants ◽  
Cutting Operation ◽  
Stone Cutting

Slab/strip production from blocks in natural stone processing plants is mostly carried out by using circular sawblade cutting machines. An efficient sawing operation can only be maintained by selecting proper cutting parameters. Experimental studies and numerical modelling methods are significant in terms of identifying the effective forces occurring during natural stone cutting with circular sawblades. In this study, experimental investigation was performed on real marble, known as Afyon White Marble, using a fully automatic circular sawblade stone cutting machine. Then, numerical modelling of circular sawing was performed with commercially available software called PFC3D. A discrete-element model of the sawing process was developed, and various numerical models were performed for different peripheral speeds and advance rates in compliance with the actual cutting operation being carried out in the laboratory. Finally, data obtained from the experimental studies were compared with the modelling data. A comparison indicates that the reactional cutting forces obtained by means of the numerical modelling are in good agreement with the results of the laboratory measurements. Consequently, the cutting operation can be determined quickly and economically. A literature review showed that, through this study, numerical modelling of the circular sawblade stone cutting process was successfully performed for the first time. It was envisaged that this would dynamically help in the examination of distinct factors in the area of natural stone processing by numerical modelling and in the illustration of the sawing mechanism.

Free Convection, Forced Convection, and Acoustic Vibrations in a Constant Temperature Vertical Tube

1959 ◽  
Vol 81 (1) ◽  
pp. 68-74 ◽  
Author(s):  
T. W. Jackson ◽  
W. B. Harrison ◽  
W. C. Boteler
Keyword(s):  
Heat Transfer ◽  
Free Convection ◽  
Sound Pressure ◽  
Experimental Studies ◽  
Experimental System ◽  
Vertical Tube ◽  
Acoustic Vibrations ◽  
Average Temperature ◽  
Comparison Of The Results ◽  
The Heat Transfer Coefficient

Experimental studies of heat transfer to air with superposed forced and free convection were reported in a previous paper [1]. In studies reported in this paper, the same experimental system was employed, but a complication was added in the form of acoustic vibrations in the flow field. By comparison of the results with and without acoustic vibrations under conditions which were otherwise the same, an effort has been made to determine the effect of acoustic vibrations on heat transfer. The Nusselt modulus, based on the log mean temperature difference, ranged from 17.2 to 50.6; the Graetz modulus, based on the bulk or average temperature of the air, ranged from 40.2 to 1633; and the Grashof-Prandtl D/L modulus, based on properties of air at the wall temperature, ranged from 0.967 × 105 to 1.26 × 106. The results indicated that sound pressure levels below approximately 118 decibels had little effect on the heat-transfer coefficient. Below 118 decibels free convection forces were evident. Above 118 decibels free convection forces were apparently negligible and the effect of sound appeared to be considerable.

scholarly journals Two-Dimensional Modelling of a Quayside Floating System

2020 ◽  
Vol 8 (11) ◽  
pp. 903
Author(s):  
Sixtine Neuvéglise ◽  
Gaële Perret ◽  
Hassan Smaoui ◽  
François Marin ◽  
Philippe Sergent
Keyword(s):  
Stokes Equations ◽  
Numerical Models ◽  
Navier Stokes ◽  
Intermediate Water ◽  
Navier Stokes Equations ◽  
Quadratic Drag ◽  
Floating System ◽  
Physical Tests ◽  
Comparison Of The Results ◽  
The Impact

This paper studies the behaviour of a quayside floater oscillating in front of a vertical dike. In order to study the floater motion and the impact of the dike on the floater, a linear analytical model based on 2D potential flow theory in intermediate water depth conditions and a numerical model resolving 2D Navier–Stokes equations are developed. Physical tests performed for different floater dimensions in a wave tank are used as references for the analytical and numerical models. The comparison of the results obtained analytically, numerically and experimentally leads to the validity domain of the potential model. A correction of this model is proposed, based on the optimization of the radiated coefficients, and a quadratic drag term is added according to Morison equation. The impact of the different parameters of the system on floater behaviour is considered. Results show that the draft has the most important impact on floater motion.

scholarly journals Analytical and numerical assessment of the effect of highly conductive inclusions distribution on the thermal conductivity of particulate composites

2019 ◽  
Vol 53 (25) ◽  
pp. 3499-3514 ◽  
Author(s):  
Kamran A Khan ◽  
Falah Al Hajeri ◽  
Muhammad A Khan
Keyword(s):  
Thermal Conductivity ◽  
Effective Thermal Conductivity ◽  
Numerical Models ◽  
Random Network ◽  
Experimental Studies ◽  
Percolation Model ◽  
Spherical Particles ◽  
Particulate Composites ◽  
Advanced Composites ◽  
Micromechanical Models

Highly conductive composites have found applications in thermal management, and the effective thermal conductivity plays a vital role in understanding the thermo-mechanical behavior of advanced composites. Experimental studies show that when highly conductive inclusions embedded in a polymeric matrix the particle forms conductive chain that drastically increase the effective thermal conductivity of two-phase particulate composites. In this study, we introduce a random network three dimensional (3D) percolation model which closely represent the experimentally observed scenario of the formation of the conductive chain by spherical particles. The prediction of the effective thermal conductivity obtained from percolation models is compared with the conventional micromechanical models of particulate composites having the cubical arrangement, the hexagonal arrangement and the random distribution of the spheres. In addition to that, the capabilities of predicting the effective thermal conductivity of a composite by different analytical models, micromechanical models, and, numerical models are also discussed and compared with the experimental data available in the literature. The results showed that random network percolation models give reasonable estimates of the effective thermal conductivity of the highly conductive particulate composites only in some cases. It is found that the developed percolation models perfectly represent the case of conduction through a composite containing randomly suspended interacting spheres and yield effective thermal conductivity results close to Jeffery's model. It is concluded that a more refined random network percolation model with the directional conductive chain of spheres should be developed to predict the effective thermal conductivity of advanced composites containing highly conductive inclusions.

Sign in / Sign up

Export Citation Format

Share Document