Using dimpled-pipe surface to reduce submarine landslide impact forces on pipelines at different span heights

2022 ◽  
Vol 244 ◽  
pp. 110343
Author(s):  
Xingsen Guo ◽  
Tingkai Nian ◽  
Thorsten Stoesser
Geosciences ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 10 ◽  
Author(s):  
Brandi Lenz ◽  
Derek Sawyer ◽  
Benjamin Phrampus ◽  
Kathy Davenport ◽  
Ashley Long

A series of large blocks from the 44-North Slide, offshore Oregon, impacted the seafloor with sufficient force to induce a broad zone of deformation. In 2017, we acquired a seismic profile from the headwall area to the outer toe of this slide. Previous work identified this slide, but it has not been imaged at high resolution before this survey. A striking surficial feature is a collection of blocks that lie downslope from an amphitheater-shaped headwall. The blocks traveled up to 20-km horizontally and about 1200-m vertically down a 13° slope and now cover an area of ~100 km2. The blocks have rough and angular edges that extend up to 400-m above the surrounding seafloor. Seaward of the blocks, a 10-km zone of sediment is deformed, horizontally shortened by 8%. We interpret the strain field to be a result of the dynamic impact forces of the slide. This suggests a high-mobility failure with tsunamigenic potential. It is unclear what preconditioned and triggered this event, however, earthquake-induced failure is one possibility. Gas hydrate dissociation may have also played a role due to the presence of a bottom-simulating reflector beneath the source area. This study underscores the need to understand the dynamic processes of submarine landslides to more accurately estimate their societal impacts.


2013 ◽  
pp. 19-25 ◽  
Author(s):  
Fawu Wang ◽  
Tomokazu Sonoyama ◽  
Mitsuki Honda

2009 ◽  
Author(s):  
Anne M. Fullerton ◽  
Ann Marie Powers ◽  
Don C. Walker ◽  
Susan Brewton

2000 ◽  
Vol 41 (4-5) ◽  
pp. 295-300 ◽  
Author(s):  
F. Murdoch ◽  
P.G. Smith

The deposition of manganese within a biofilm growing on the surface of high-density polyethlene (HDPE) and polyvinychloride (PVC) was studied over a period of four months. The manganese rich water used in the study was inoculated with a manganese oxidising Pseudomonas spp. The level of Mn2+ in the water was monitored and was found to decrease as the biofilm formation increased. This was confirmed by energy dispersive X-ray spectroscopy (EDS) analysis which showed the detection of manganese was dependent on the presence of a biofilm. After two months a 100% removal of Mn2+ was observed in all the flasks inoculated by the Pseudomonas spp. and manganese micro-nodules, the formation of which were reported in Murdoch and Smith (1999), were being formed in large clusters across the surfaces of both the HDPE and PVC. The manganese peak area from the EDS spectrum analysis of the micro-nodules was significantly larger than was measured in the biofilm when these micro-nodules were absent. The scanning confocal laser microscope (SCLM) images of three-week samples showed high bacterial activity around areas where manganese micro-nodules were starting to form on the pipe surface.


Author(s):  
Masatoshi YUHI ◽  
Akinori YAMAMOTO ◽  
Masanobu KOBA ◽  
Takuya UENO

Author(s):  
Toshimichi KANETO ◽  
Kazuya YAMAMOTO ◽  
Masanobu KOBA ◽  
Tatsuto KIMURA ◽  
Ayumi NISHI ◽  
...  
Keyword(s):  

2013 ◽  
Vol 64 (5) ◽  
Author(s):  
Muhammad Jaysuman Pusppanathan ◽  
Fazlul Rahman Yunus ◽  
Nor Muzakkir Nor Ayob ◽  
Ruzairi Abdul Rahim ◽  
Fatin Aliah Phang ◽  
...  

Electrical capacitance tomography (ECT) is one of process tomography technique which is developed rapidly in recent years. ECT is an imaging technique to obtain the internal permittivity distribution of a vessel or pipe by using capacitance electrodes sensor. This method has been integrated with ultrasonic tomography as multimodality system to perform multiphase flow measurement such as crude oil separation and oil process industry. In the present paper, a novel type of ECT sensor was developed using copper FR4 material. The electrode sensors can be flexibly bend or curve to fit the pipe surface for optimum measurement. Thus, every single sensor strip is designed to be functioned independently. Such system has lower sensing capability in the central of the sensing area which often contributes to poor imaging result. This problem can be overcome by combining the ECT with ultrasonic tomography to form a dual modality tomography system. By implementing the new ECT sensor, multiphase flow measurement image results can be achieved. The reconstructed image results are presented in this paper.


2020 ◽  
Vol 87 (9) ◽  
pp. 553-563
Author(s):  
Jörg Gebhardt ◽  
Guruprasad Sosale ◽  
Subhashish Dasgupta

AbstractAccurate and responsive non-invasive temperature measurements are enablers for process monitoring and plant optimization use cases in the context of Industry 4.0. If their performance is proven for large classes of applications, such measurement principles can replace traditional invasive measurements. In this paper we describe a two-step model to estimate the process temperature from a pipe surface temperature measurement. This static case model is compared to and enhanced by computational fluid dynamic (CFD) calculations to predict transient situations. The predictions of the approach are validated by means of controlled experiments in a laboratory environment. The experimental results demonstrate the efficacy of the model, the responsiveness of the pipe surface temperature, and that state of the art industrial non-invasive sensors can achieve the performance of invasive thermowells. The non-invasive sensors are then used to demonstrate the performance of the model in industrial applications for cooling fluids and steam.


Sign in / Sign up

Export Citation Format

Share Document