Development of a novel method for measuring the interfacial bonding strength of laser cladding coatings

2022 ◽  
Vol 148 ◽  
pp. 107699
Author(s):  
M.H. Nie ◽  
S. Zhang ◽  
Z.Y. Wang ◽  
H.F. Zhang ◽  
C.H. Zhang ◽  
...  
Keyword(s):  
Laser Cladding ◽  
Bonding Strength ◽  
Interfacial Bonding ◽  
Interfacial Bonding Strength ◽  
Novel Method

Effect of Fiber’s Surface Pretreatment on the Interfacial Bonding Strength between Steel Fiber and Resin

2014 ◽  
Vol 989-994 ◽  
pp. 177-180
Author(s):  
Hao Yang ◽  
Jian Hua Zhang ◽  
Guo Yan Sun ◽  
Yi Zhang
Keyword(s):  
Mechanical Properties ◽  
Cast Iron ◽  
Bonding Strength ◽  
Steel Fiber ◽  
Resin Composite ◽  
Interfacial Bonding ◽  
Steel Fibers ◽  
Surface Pretreatment ◽  
Interfacial Bonding Strength ◽  
Coupling Treatment

For the characteristic that the mechanical properties of resin composite are lower than cast iron, steel fibers are used to improve its properties in this paper. A weak interfacial bonding strength between steel fibers and resin indicates that steel fibers’ property cannot perform well in the polymer. In order to improve the interfacial bonding strength, four methods of surface treatment, phosphating, acid pickling, oxidation, and coupling are applied to steel fibers, and the corresponding pull-off tests are carried out to compare with untreated steel fibers. Research results show that the maximum interfacial bonding strength is increased by 45.1% after coupling treatment.

scholarly journals Study on the detection of interfacial bonding strength of coatings (Ⅱ): detecting system of bonding strength

2006 ◽  
Vol 55 (11) ◽  
pp. 6008
Author(s):  
Zhang Yong-Kang ◽  
Kong De-Jun ◽  
Feng Ai-Xin ◽  
Lu Jin-Zhong ◽  
Ge Tao
Keyword(s):  
Bonding Strength ◽  
Interfacial Bonding ◽  
Interfacial Bonding Strength

Effect of Temperature on the Interfacial Bonding Strength between PVB and Glass from RT to -50 °C

2011 ◽  
Vol 492 ◽  
pp. 61-65 ◽  
Author(s):  
Yuan Tian ◽  
Yi Wang Bao ◽  
De Tian Wan ◽  
Xiu Fang Wang ◽  
Zhi Ming Han
Keyword(s):  
Bonding Strength ◽  
Room Temperature ◽  
Testing Temperature ◽  
Interfacial Bonding ◽  
Effect Of Temperature ◽  
Laminated Glass ◽  
Interfacial Bonding Strength ◽  
Cooling Speed ◽  
Bonding Method ◽  
Shear Bonding Strength

Laminated glass and photovoltaic laminated glass are widely used in architecture. The interfacial bonding strengths between poly(vinyl butyral) (PVB) and glass were investigated by the cross-bonding method from room temperature to -50 °C. The loading speed was 5 mm/min, and the cooling speed was about 0.5 °C/min. The testing sample was hold at each temperature for half an hour. It was revealed that the testing temperature had great effect on the bonding strength. At room temperature, the tensile bonding strength was 11.49 MPa and the shear bonding strength was 6.61 MPa. With the temperature decreased from RT to -50 °C, the tensile bonding strength was decreased by 66.81%, but the shear bonding strength was increased by 212.16%. From RT to -30 °C, the change rates of the tensile and shear bonding strength bonding strength were 65.57% and 172.68% respectively, only 3.61% and 14.48% from -30 °C to -50 °C. The mechanism for the bonding strength depended on testing temperatures from RT to -50 °C was also discussed.

Sign in / Sign up

Export Citation Format

Share Document