scholarly journals Mid-Infrared Intracavity Quartz-Enhanced Photoacoustic Spectroscopy with pptv – Level Sensitivity Using a T-shaped Custom Tuning Fork

2022 ◽  
pp. 100330
Author(s):  
Jakob Hayden ◽  
Marilena Giglio ◽  
Angelo Sampaolo ◽  
Vincenzo Spagnolo ◽  
Bernhard Lendl
Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1093 ◽  
Author(s):  
Tingting Wei ◽  
Hongpeng Wu ◽  
Lei Dong ◽  
Frank Tittel

This review aims to discuss the latest advancements of an acoustic detection module (ADM) based on quartz-enhanced photoacoustic spectroscopy (QEPAS). Starting from guidelines for the design of an ADM, the ADM design philosophy is described. This is followed by a review of the earliest standard quartz tuning fork (QTF)-based ADM for laboratory applications. Subsequently, the design of industrial fiber-coupled and free-space ADMs based on a standard QTF for near-infrared and mid-infrared laser sources respectively are described. Furthermore, an overview of the latest development of a QEPAS ADM employing a custom QTF is reported. Numerous application examples of four QEPAS ADMs are described in order to demonstrate their reliability and robustness.


2016 ◽  
Vol 41 (17) ◽  
pp. 4118 ◽  
Author(s):  
Mikael Lassen ◽  
Laurent Lamard ◽  
Yuyang Feng ◽  
Andre Peremans ◽  
Jan C. Petersen

2010 ◽  
Vol 10 (5) ◽  
pp. 855-862 ◽  
Author(s):  
Changwen Du ◽  
Guiqin Zhou ◽  
Huoyan Wang ◽  
Xiaoqin Chen ◽  
Jianmin Zhou

2019 ◽  
Vol 44 (5) ◽  
pp. 1142 ◽  
Author(s):  
Juho Karhu ◽  
Teemu Tomberg ◽  
Francisco Senna Vieira ◽  
Guillaume Genoud ◽  
Vesa Hänninen ◽  
...  

Sensors ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 5240 ◽  
Author(s):  
Haoyang Lin ◽  
Zhao Huang ◽  
Ruifeng Kan ◽  
Huadan Zheng ◽  
Yihua Liu ◽  
...  

A novel quartz-enhanced photoacoustic spectroscopy (QEPAS) sensor based on a micro quartz tuning fork (QTF) is reported. As a photoacoustic transducer, a novel micro QTF was 3.7 times smaller than the usually used standard QTF, resulting in a gas sampling volume of ~0.1 mm3. As a proof of concept, water vapor in the air was detected by using 1.39 μm distributed feedback (DFB) laser. A detailed analysis of the performance of a QEPAS sensor based on the micro QTF was performed by detecting atmosphere H2O. The laser focus position and the laser modulation depth were optimized to improve the QEPAS excitation efficiency. A pair of acoustic micro resonators (AmRs) was assembled with the micro QTF in an on-beam configuration to enhance the photoacoustic signal. The AmRs geometry was optimized to amplify the acoustic resonance. With a 1 s integration time, a normalized noise equivalent absorption coefficient (NNEA) of 1.97 × 10−8 W·cm−1·Hz−1/2 was achieved when detecting H2O at less than 1 atm.


Sensors ◽  
2019 ◽  
Vol 19 (18) ◽  
pp. 3825 ◽  
Author(s):  
Huadan Zheng ◽  
Haoyang Lin ◽  
Lei Dong ◽  
Yihua Liu ◽  
Pietro Patimisco ◽  
...  

A detailed investigation of the influence of quartz tuning forks (QTFs) resonance properties on the performance of quartz-enhanced photoacoustic spectroscopy (QEPAS) exploiting QTFs as acousto-electric transducers is reported. The performance of two commercial QTFs with the same resonance frequency (32.7 KHz) but different geometries and two custom QTFs with lower resonance frequencies (2.9 KHz and 7.2 KHz) were compared and discussed. The results demonstrated that the fundamental resonance frequency as well as the quality factor and the electrical resistance were strongly inter-dependent on the QTF prongs geometry. Even if the resonance frequency was reduced, the quality factor must be kept as high as possible and the electrical resistance as low as possible in order to guarantee high QEPAS performance.


Sign in / Sign up

Export Citation Format

Share Document