scholarly journals Effect of polydopamine deposition conditions on polysulfone ultrafiltration membrane properties and threshold flux during oil/water emulsion filtration

Polymer ◽  
2016 ◽  
Vol 97 ◽  
pp. 247-257 ◽  
Author(s):  
Sirirat Kasemset ◽  
Zhengwang He ◽  
Daniel J. Miller ◽  
Benny D. Freeman ◽  
Mukul M. Sharma
Keyword(s):  
Ultrafiltration Membrane ◽  
Membrane Properties ◽  
Water Emulsion ◽  
Oil Water ◽  
Emulsion Filtration ◽  
Deposition Conditions

Treatment of oil/water emulsion by polyethylene glycol ultrafiltration membrane

2005 ◽  
Vol 12 (5) ◽  
pp. 542-545 ◽  
Author(s):  
De-wen He ◽  
Yu-tang Xiao ◽  
Xiong Li ◽  
Yan Jin
Keyword(s):  
Polyethylene Glycol ◽  
Ultrafiltration Membrane ◽  
Water Emulsion ◽  
Oil Water

A wavy flow channel system for membrane fouling control in oil/water emulsion filtration

2021 ◽  
Vol 44 ◽  
pp. 102340
Author(s):  
Nafiu Umar Barambu ◽  
Muhammad Roil Bilad ◽  
Afiq Mohd Laziz ◽  
Nik Abdul Hadi Md Nordin ◽  
Mohamad Azmi Bustam ◽  
...  
Keyword(s):  
Membrane Fouling ◽  
Flow Channel ◽  
Channel System ◽  
Water Emulsion ◽  
Fouling Control ◽  
Oil Water ◽  
Emulsion Filtration

scholarly journals Polyvinylidene Fluoride Membrane Via Vapour Induced Phase Separation for Oil/Water Emulsion Filtration

Polymers ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 427
Author(s):  
Normi Izati Mat Nawi ◽  
Nur Rifqah Sait ◽  
Muhammad Roil Bilad ◽  
Norazanita Shamsuddin ◽  
Juhana Jaafar ◽  
...  
Keyword(s):  
Phase Separation ◽  
Pore Size ◽  
Water Permeability ◽  
Membrane Fouling ◽  
Polyvinylidene Fluoride ◽  
Clean Water ◽  
Mean Flow ◽  
Water Emulsion ◽  
Oil Water ◽  
Emulsion Filtration

Membrane-based technology is an attractive option for the treatment of oily wastewater because of its high oil removal efficiency, small footprint and operational simplicity. However, filtration performance is highly restricted by membrane fouling, especially when treating oil/water emulsion as a result of strong interaction between oil droplets and the hydrophobic property of the membrane. This study explores the fabrication of polyvinylidene fluoride (PVDF)-based membrane via the vapour induced phase separation (VIPS) method while incorporating polyvinyl pyrrolidone (PVP) as a hydrophilic additive to encounter membrane fouling issues and improve membrane filterability. The resulting membranes were characterized and tested for oil/water emulsion filtration to evaluate their hydraulic, rejection and anti-fouling properties. Results show that the changes in membrane morphology and structure from typical macrovoids with finger-like substructure to cellular structure and larger membrane pore size were observed by the prolonged exposure time from 0 to 30 min through the VIPS method. The enhanced clean water permeability is attributed to the addition of PVP–LiCl in the dope solution that enlarges the mean flow pore size from 0.210 ± 0.1 to 7.709 ± 3.5 µm. The best performing membrane was the VIPS membrane with an exposure time of 5 min (M-5), showing oil/water emulsion permeability of 187 Lm−2 h−1 bar−1 and oil rejection of 91.3% as well as an elevation of 84% of clean water permeability compared to pristine PVDF developed using a typical non-solvent induced phase separation (NIPS) method. Despite the relatively high total fouling, M-5 was able to maintain its high permeability by water flushing as a simple operation for membrane fouling control. The performance was achieved thanks to combination of the large mean flow pore size and hydrophilic property from residual PVP in the membarne matrix. Overall, the results demonstrate the potential of the optimum VIPS method in the presence of PVP and LiCl additives for oil/water emulsion treatment.

scholarly journals Effect of Membrane Materials and Operational Parameters on Performance and Energy Consumption of Oil/Water Emulsion Filtration

Membranes ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 370
Author(s):  
Nafiu Umar Barambu ◽  
Muhammad Roil Bilad ◽  
Nurul Huda ◽  
Nik Abdul Hadi Md Nordin ◽  
Mohamad Azmi Bustam ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Membrane Fouling ◽  
Membrane Material ◽  
Operational Parameters ◽  
Water Emulsion ◽  
Low Energy Consumption ◽  
Oil Concentration ◽  
Oil Water ◽  
The Impact ◽  
Emulsion Filtration

Membrane technology is one of reliable options for treatment of oil/water emulsion. It is highly attractive because of its effectiveness in separating fine oil droplets of <2 µm sizes, which is highly challenging for other processes. However, the progress for its widespread implementations is still highly restricted by membrane fouling. Most of the earlier studies have demonstrated the promise of achieving more sustained filtration via membrane material developments. This study addresses issues beyond membrane development by assessing the impact of membrane material (blend of polysulfone, PSF and polyethylene glycol, PEG), operational pressure, and crude oil concentration on the filtration performance of oil/water emulsion. The filtration data were then used to project the pumping energy for a full-scale system. Results show that fouling resistant membrane offered high oil/water emulsion permeability, which translated into a low energy consumption. The oil/water emulsion permeability was improved by three-fold from 45 ± 0 to 139 ± 1 L/(m2 h bar) for PSF/PEG-0 membrane in comparison to the most optimum one of PSF/PEG-60. It corresponded to an energy saving of up to ~66%. The pumping energy could further be reduced from 27.0 to 7.6 Wh/m3 by operation under ultra-low pressure from 0.2 to 0.05 bar. Sustainable permeability could be achieved when treating 1000 ppm oil/water emulsion, but severe membrane fouling was observed when treating emulsion containing crude oils of >3000 ppm to a point of no flux.

A novel super-hydrophilic PSf/HAO nanocomposite ultrafiltration membrane for efficient separation of oil/water emulsion

2015 ◽  
Vol 150 ◽  
pp. 13-20 ◽  
Author(s):  
R. Jamshidi Gohari ◽  
F. Korminouri ◽  
W.J. Lau ◽  
A.F. Ismail ◽  
T. Matsuura ◽  
...  
Keyword(s):  
Ultrafiltration Membrane ◽  
Water Emulsion ◽  
Efficient Separation ◽  
Oil Water

New Technology for Oil/Water Emulsion Treatment: Phases I and II

1998 ◽  
Author(s):  
S. Venkatesh ◽  
C. Watson ◽  
C. D. Wolbach ◽  
L. R. Waterland
Keyword(s):  
New Technology ◽  
Water Emulsion ◽  
Oil Water
Sign in / Sign up

Export Citation Format

Share Document