Particle scale modelling of melt pool dynamics and pore formation in selective laser melting additive manufacturing

2021 ◽  
Author(s):  
Erlei Li ◽  
Zongyan Zhou ◽  
Lin Wang ◽  
Haopeng Shen ◽  
Ruiping Zou ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Selective Laser Melting ◽  
Pore Formation ◽  
Laser Melting ◽  
Melt Pool ◽  
Scale Modelling

scholarly journals An Overview of Additive Manufacturing Technologies—A Review to Technical Synthesis in Numerical Study of Selective Laser Melting

Materials ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 3895 ◽  
Author(s):  
Abbas Razavykia ◽  
Eugenio Brusa ◽  
Cristiana Delprete ◽  
Reza Yavari
Keyword(s):  
Numerical Simulation ◽  
Additive Manufacturing ◽  
Selective Laser Melting ◽  
Powder Bed Fusion ◽  
Laser Melting ◽  
Powder Bed ◽  
Part Quality ◽  
Melt Pool ◽  
Wide Range ◽  
Am Processes

Additive Manufacturing (AM) processes enable their deployment in broad applications from aerospace to art, design, and architecture. Part quality and performance are the main concerns during AM processes execution that the achievement of adequate characteristics can be guaranteed, considering a wide range of influencing factors, such as process parameters, material, environment, measurement, and operators training. Investigating the effects of not only the influential AM processes variables but also their interactions and coupled impacts are essential to process optimization which requires huge efforts to be made. Therefore, numerical simulation can be an effective tool that facilities the evaluation of the AM processes principles. Selective Laser Melting (SLM) is a widespread Powder Bed Fusion (PBF) AM process that due to its superior advantages, such as capability to print complex and highly customized components, which leads to an increasing attention paid by industries and academia. Temperature distribution and melt pool dynamics have paramount importance to be well simulated and correlated by part quality in terms of surface finish, induced residual stress and microstructure evolution during SLM. Summarizing numerical simulations of SLM in this survey is pointed out as one important research perspective as well as exploring the contribution of adopted approaches and practices. This review survey has been organized to give an overview of AM processes such as extrusion, photopolymerization, material jetting, laminated object manufacturing, and powder bed fusion. And in particular is targeted to discuss the conducted numerical simulation of SLM to illustrate a uniform picture of existing nonproprietary approaches to predict the heat transfer, melt pool behavior, microstructure and residual stresses analysis.

A Comparative Study Between Selective Laser Melting and Electron Beam Additive Manufacturing Based on Thermal Modeling

2018 ◽  
Author(s):  
M. Shafiqur Rahman ◽  
Paul J. Schilling ◽  
Paul D. Herrington ◽  
Uttam K. Chakravarty
Keyword(s):  
Electron Beam ◽  
Additive Manufacturing ◽  
Heat Source ◽  
Selective Laser Melting ◽  
Thermal Modeling ◽  
Maximum Temperature ◽  
Full Density ◽  
Rate Variation ◽  
Laser Melting ◽  
Melt Pool

Selective Laser Melting (SLM) and Electron Beam Additive Manufacturing (EBAM) are two of the most promising additive manufacturing technologies that can make full density metallic components using layer-by-layer fabrication methods. In this study, three-dimensional computational fluid dynamics models with Ti-6Al-4V powder were developed to conduct numerical simulations of both the SLM and EBAM processes. A moving conical volumetric heat source with Gaussian distribution and temperature-dependent thermal properties were incorporated in the thermal modeling of both processes. The melt-pool geometry and its thermal behavior were investigated numerically and results for temperature profile, cooling rate, variation in specific heat, density, thermal conductivity, and enthalpy were obtained with similar heat source specifications. Results obtained from the two models at the same maximum temperature of the melt pool were then compared to describe their deterministic features to be considered for industrial applications. Validation of the modeling was performed by comparing the EBAM simulation results with the EBAM experimental results for melt pool geometry.

A Sensitivity Analysis Study on the Material Properties and Process Parameters for Selective Laser Melting of Inconel 625

2015 ◽  
Author(s):  
Luis E. Criales ◽  
Yiğit M. Arısoy ◽  
Tuğrul Özel
Keyword(s):  
Additive Manufacturing ◽  
Selective Laser Melting ◽  
Process Parameters ◽  
Scanning Speed ◽  
Inconel 625 ◽  
Pool Data ◽  
Temperature Profiles ◽  
Laser Melting ◽  
Melt Pool ◽  
Laser Heat Source

A prediction of the 2-D temperature profile and melt pool geometry for Selective Laser Melting (SLM) of Inconel 625 metal powder with a numerically-based approach for solving the heat conduction-diffusion equation was established in this paper. A finite element method solution of the governing equation was developed. A review of the current efforts in numerical modeling for laser-based additive manufacturing is presented. Initially, two-dimensional (2-D) temperature profiles along the scanning (x-direction) and hatch direction (y-direction) are calculated for a moving laser heat source to understand the temperature rise due to heating during SLM. The effects of varying laser power, scanning speed and the powder material’s density are analyzed. Based on the predicted temperature distributions, melt pool geometry, i.e. the locations at which melting of the powder material occurs, is determined. The results are chiefly compared against the published literature on melt pool data. The main goal of this research is to develop a computational tool with which investigation of the importance of various laser, material, and process parameters on the built dimensional quality in laser-based additive manufacturing becomes not only possible but also practical and reproducible.

scholarly journals Feedback Control of Melt Pool Area in Selective Laser Melting Additive Manufacturing Process

Processes ◽  
2021 ◽  
Vol 9 (9) ◽  
pp. 1547
Author(s):  
Syed Zahid Hussain ◽  
Zareena Kausar ◽  
Zafar Ullah Koreshi ◽  
Shakil R. Sheikh ◽  
Hafiz Zia Ur Rehman ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Feedback Control ◽  
Selective Laser Melting ◽  
Manufacturing Process ◽  
Thermal Model ◽  
Laser Melting ◽  
Powder Bed ◽  
Melt Pool ◽  
Melt Pool Size ◽  
Pool Area

Selective laser melting (SLM), a metal powder fusion additive manufacturing process, has the potential to manufacture complex components for aerospace and biomedical implants. Large-scale adaptation of these technologies is hampered due to the presence of defects such as porosity and part distortion. Nonuniform melt pool size is a major cause of these defects. The melt pool size changes due to heat from the previous powder bed tracks. In this work, the effect of heat sourced from neighbouring tracks was modelled and feedback control was designed. The objective of control is to regulate the melt pool cross-sectional area rejecting the effect of heat from neighbouring tracks within a layer of the powder bed. The SLM process’s thermal model was developed using the energy balance of lumped melt pool volume. The disturbing heat from neighbouring tracks was modelled as the initial temperature of the melt pool. Combining the thermal model with disturbance model resulted in a nonlinear model describing melt pool evolution. The PID, a classical feedback control approach, was used to minimize the effect of intertrack disturbance on the melt pool area. The controller was tuned for the desired melt pool area in a known environment. Simulation results revealed that the proposed controller regulated the desired melt pool area during the scan of multiple tracks of a powder layer within 16 milliseconds and within a length of 0.04 mm reducing laser power by 10% approximately in five tracks. This reduced the chance of pore formation. Hence, it enhances the quality of components manufactured using the SLM process, reducing defects.

scholarly journals Improving surface quality in selective laser melting based tool making

2021 ◽  
Author(s):  
Filippo Simoni ◽  
Andrea Huxol ◽  
Franz-Josef Villmer
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
Surface Quality ◽  
Selective Laser Melting ◽  
Melting Process ◽  
Laser Remelting ◽  
Laser Melting ◽  
Great Cost ◽  
Starting Point ◽  
Processing Techniques

AbstractIn the last years, Additive Manufacturing, thanks to its capability of continuous improvements in performance and cost-efficiency, was able to partly replace and redefine well-established manufacturing processes. This research is based on the idea to achieve great cost and operational benefits especially in the field of tool making for injection molding by combining traditional and additive manufacturing in one process chain. Special attention is given to the surface quality in terms of surface roughness and its optimization directly in the Selective Laser Melting process. This article presents the possibility for a remelting process of the SLM parts as a way to optimize the surfaces of the produced parts. The influence of laser remelting on the surface roughness of the parts is analyzed while varying machine parameters like laser power and scan settings. Laser remelting with optimized parameter settings considerably improves the surface quality of SLM parts and is a great starting point for further post-processing techniques, which require a low initial value of surface roughness.

In-situ capture of melt pool signature in selective laser melting using U-Net-based convolutional neural network

2021 ◽  
Vol 68 ◽  
pp. 347-355
Author(s):  
Qihang Fang ◽  
Zhenbiao Tan ◽  
Hui Li ◽  
Shengnan Shen ◽  
Sheng Liu ◽  
...  
Keyword(s):  
Neural Network ◽  
Convolutional Neural Network ◽  
Selective Laser Melting ◽  
Laser Melting ◽  
Melt Pool
Sign in / Sign up

Export Citation Format

Share Document