Dynamic accuracy measurement system for mechanical wristwatch

2021 ◽  
Vol 70 ◽  
pp. 117-123
Author(s):  
Tatsuhito Aihara ◽  
Chihiro Kamio ◽  
Yosuke Hara ◽  
Kengo Ito ◽  
Koichiro Jujo
2011 ◽  
Vol 222 ◽  
pp. 62-65 ◽  
Author(s):  
Takeshi Hashimoto ◽  
Mitsuo Kaneko ◽  
András Rövid ◽  
Hiroaki Ohta ◽  
Akira Fukuda ◽  
...  

To reveal the influence of global warming on glaciers, highly accurate observations of glacier movement must continue every year. It is thought that there is a close relationship between glacier moving speed and global warming. Thus, there have been precise, detailed observations of the movement of the Perito Moreno glacier in Patagonia of the Argentine Republic over the past five years. The measurement method of using GPS and an optical measuring instrument is generally used to monitor glacier movement, but the measurement accuracy attained is not optimal because of the huge size of the glacier. The measurement system used for the Perito Moreno observations, however, could realize high accuracy measurement over long distance. The measurement system is based on the principle of stereo measurement using cameras. This paper describes the results of the Perito Moreno glacier observations of this year and considers the effectiveness of glacier observation using cameras.


2014 ◽  
Vol 609-610 ◽  
pp. 106-112 ◽  
Author(s):  
Hai Bin Pan ◽  
Jian Ning Ding ◽  
Bao Guo Cao ◽  
Guang Gui Cheng

Inspection and measurement for the sheet resistance and resistivity play a pivotal role in the semiconductor industry. In this study, a high-accuracy measurement system for sheet resistance of thin films was designed based on dual-measurement with four-point probe method. The measurement system was composed of a special switching circuit, a digital output module, Keithley 2400 SourceMeter, and a computer running LabVIEW. The special switching circuit designed based on the multiplexer played an important role in current probes and voltage probes automatic switching under the control of virtual instrumentation software LabVIEW and National instruments digital output module hardware NI 9401. Keithley 2400 SourceMeter controlled by LabVIEW was used for two-times high-precision voltage measurement. Van der Pauw correction factor were calculated based on the results of the two-times voltage measurement. Then the sheet resistance of thin films was calculated by LabVIEW softwares powerful computing. The experimental results show that the designed and developed system can meet the needs of fast on-line measurement of thin films sheet resistance with a wide range, and moreover, the accuracy of measurements and the level of automatization have been dramatically improved compared to the conventional measurement system.


2001 ◽  
Author(s):  
Takao Tamura ◽  
Takahiro Ema ◽  
Hiroshi Nozue ◽  
Tamoya Sugahara ◽  
Akio Sugano ◽  
...  

Author(s):  
Laura Ekstrand ◽  
Song Zhang

Measuring three-dimensional (3D) surfaces with extremely high contrast (e.g., partially shiny surfaces) is extremely difficult with optical metrology methods. Conventional techniques, which involve measurement from multiple angles or camera aperture adjustments, pose issues for high accuracy measurement in the manufacturing industry because they are difficult to automate and often induce undesirable vibrations in the calibrated measurement system. This paper presents a framework for optically capturing high-contrast 3D surfaces via flexible exposure time variation. This technique leverages the binary defocusing technique that was recently developed at Iowa State University to allow digital fringe projection with a camera exposure time far shorter than the projector’s projection period. Since the camera exposure time can be rapidly adjusted in software, the proposed technique could be automated without mechanical adjustments to the measurement system. Moreover, the exposure times are sufficiently short as to be efficiently packed into a projection period, giving this technique the potential for high speed applications. Experimental results will be presented to demonstrate the success of the proposed method.


2020 ◽  
Author(s):  
Andreas Riedl ◽  
Yafei Li ◽  
Nina Buchmann ◽  
Werner Eugster

<p>Dew and fog occur rather frequently in ecosystems all over the world. Still, water from dew and fog is often not considered in ecohydrological budgets. One reason is that there is no reference standard instrument to measure those water inputs into ecosystems. Another reason is that the water input from dew and fog is, compared to the water input from precipitation, a rather small amount at most locations, which makes it difficult to be measured accurately.</p><p>We developed a custom-made measurement system for quantifying dew and fog water inputs to temperate grassland ecosystems. The system consists of three high accuracy weighing micro-lysimeters composed of a plant pot which stands on a weighing platform with additional sensors. The weighing micro-lysimeters were designed to quantify even small water gains caused by dew formation on grasses with unprecedented accuracy.  Some former studies on micro-lysimeter design for dew measurements used small-size plant or bare-soil pots in combination with low capacity load cells, which allowed high accuracy measurements, but these systems were not able to mimic natural field conditions in terms of thermal behaviour and plant development. Other studies used large lysimeter systems which were better capable to simulate natural conditions, but required substantial infrastructure for installation and often showing too low accuracy, because of a trade-off between load cell accuracy vs. capacity.</p><p>Inside the micro-lysimeter plant pots, we installed soil moisture and temperature sensors to compare thermal and moisture conditions inside the plant pots with sensors installed in a control field plot at 1 m distance. A further component of the measurement system is a visibility sensor which allows to determine if water inputs originate solely from dew or from dew and fog in combination (fog: horizontal visibility < 1000 m). A leaf moisture sensor gives a redundant measurement to sense if leaves are really wet and for how long they stay wet. </p><p>We set up a measuring network with the beforementioned system at eight sites in Switzerland and an additional site in South Tyrol (Italy). The sites were selected to gain representative measurements over an extended elevational gradient (from 500 to 2000 m a.s.l), within areas prone to fog (Swiss Plateau) and rather unlikely fog occurrence (Alps), as well as with low and high precipitation amounts (from 500 up to over 1500 mm/year).</p><p>Measuring dew and fog water inputs is expected to be important, as grassland species are able to take up water via foliar water uptake. Thus, dew and fog water can be important water inputs, especially in dry periods during fair weather summer conditions.</p>


Sign in / Sign up

Export Citation Format

Share Document