Experimental thermal performance analysis of ground heat exchangers for space heating and cooling applications

2017 ◽  
Vol 113 ◽  
pp. 1168-1181 ◽  
Author(s):  
T. Sivasakthivel ◽  
Mikael Philippe ◽  
K. Murugesan ◽  
Vikas Verma ◽  
Pingfang Hu
2020 ◽  
Vol 205 ◽  
pp. 06013
Author(s):  
Anil Yildiz ◽  
Ross A. Stirling

Space heating and cooling comprises a significant portion of the overall energy consumption. Ground heat exchangers (GHE), are a sustainable alternative to conventional, non-renewably powered heating and cooling systems. Space is a scarce resource in densely urbanised areas, allocating dedicated locations to build GHE systems can result in high initial capital costs and an inflexibility in retrofitting. An alternative solution is to utilise existing, multi-benefit and resilient Sustainable Drainage Systems (SuDS) in cities. An investigation into the feasibility of utilising SuDS as sites for potential GHEs requires an understanding of their thermal and hydrological behaviour and boundary conditions. This study utilises a heavily-instrumented, vegetated lysimeter setup, exposed to atmospheric conditions, to test a pilot-scale SuDS heat exchanger. Heat rejection into the substrate of a SuDS has been simulated with the application of heat via voltage-controlled heating cables at a depth of 850 mm for 72-hour durations (at three different power inputs) with 96-hours between each power input. These heat dissipation periods are reflected in measured soil temperature profiles. Volumetric water content, matric suction, soil temperature and heat flux are monitored at various locations in the lysimeter. A finite difference modelling scheme has been developed to simulate the variation in soil temperature due to heat rejection.


Author(s):  
Kiran Lankalapalli ◽  
Ahmed ElSawy ◽  
Stephen Idem

A steady state sensible performance analysis of multi-pass cross-flow finned-tube heat exchangers is reported. The investigation considers various flow circuiting, such as counter cross-flow, parallel cross-flow, and cross-flow where the tube-side flow is in parallel. A previously developed matrix approach is used to evaluate the heat exchanger performance in each tube pass. The equations required to model the thermal performance of these configurations are presented, and the thermal performance is compared for each type of flow circuiting. Thereafter a parametric study on cross-flow heat exchanger performance is performed by varying physically significant parameters such as number of transfer units (NTU) and capacity rate ratios, and the graphical results for each type of flow circuiting are presented both for both two-pass and three-pass arrangements. A consistent criterion is proposed for each case, wherein increasing the NTU beyond a certain threshold value does not significantly improve heat exchanger thermal performance.


2013 ◽  
Vol 838-841 ◽  
pp. 1913-1916 ◽  
Author(s):  
Seok Yoon ◽  
Nam Hyun Cho ◽  
Gyu Hyun Go ◽  
Seung Rae Lee

This paper presents experimental study on the evaluation of thermal performance of U and W type ground heat exchangers (GHEs). These GHEs were installed in a partially saturated landfill ground which was composed of silt and clay in the runway area of Incheon International airport. Thermal performance tests (TPTs) were conducted for 100 hours under the continuous operation condition. Heat exchange rate of individual GHE was evaluated from the TPT results, and construction cost was also estimated. The required Borehole length of U and W type GHEs was calculated considering real construction condition from GLD (ground loop design) program.


2007 ◽  
Vol 129 (4) ◽  
pp. 438-448 ◽  
Author(s):  
E. Andersen ◽  
S. Furbo

A theoretical analysis of differently designed solar combi systems is performed with weather data from the Danish Design Reference Year (55 deg N). Three solar combi system designs found on the market are investigated. The investigation focuses on the influence of stratification on the thermal performance under different operation conditions with different domestic hot water and space heating demands. The solar combi systems are initially equipped with heat exchanger spirals and direct inlets to the tank. A step-by-step investigation is performed demonstrating the influence on the thermal performance of using inlet stratification pipes at the different inlets. Also, how the design of the space heating system, the control system of the solar collectors, and the system size influence the thermal performance of solar combi systems are investigated. The work is carried out within the Solar Heating and Cooling Programme of the International Energy Agency (IEA SHC), Task 32.


Sign in / Sign up

Export Citation Format

Share Document