Significantly enhanced NO2 gas-sensing performance of nanojunction-networked SnO2 nanowires by pulsed UV-radiation

NO2 gas is a highly toxic gas and emitted from vehicles such as motocycles and internal engine transportations. It is one of the major reasons which cause air pollution in recent years, especially in big cities. Therefore, the development of NO2 gas sensor for environmental monitoring has been gained research attention in the global. In this work, we report a simple and effective method to prepare SnO2 nanowire gas sensors. The SnO2 nanowires were directly grown on the unplosihed Al2O3 substrate equipped with a pair of Pt-electrodes. The morphology and microstructure of as-grown nanowires have been investigated via X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM) and transimission electron microscopy (TEM). The results indicated that the diameters and lengths of nanowires are about 60 – 100 nm and tens of μm, respectively. The gas-sensing performance of the SnO2 nanowires sensors annealed at different temperatures have also investigated. The results revealed that the annealed temperatures of 400 C and 500 oC do not affected on gas-sensing performance of SnO2 nanowires sensors, while the annealed temperature of 600oC results in strong decrease in NO2 gas response as compared with as-grown SnO2 nanowires sensor.

Download Full-text

Morphology and structure characterization of crystalline SnO2 1D nanostructures

Photonics Letters of Poland ◽

10.4302/plp.v12i3.1019 ◽

2020 ◽

Vol 12 (3) ◽

pp. 70

Author(s):

Wiktor Matysiak ◽

Tomasz Tański ◽

Weronika Monika Smok

Keyword(s):

Tin Oxide ◽

Gas Sensing ◽

Hollow Nanofibers ◽

One Dimensional ◽

Sensing Properties ◽

Sno2 Nanowires ◽

Electrospinning Method ◽

Ethanol Sensing ◽

Sensing Performance

In recent years, many attempts have been made to improve the sensory properties of SnO2, including design of sensors based on one-dimensional nanostructures of this material, such as nanofibers, nanotubes or nanowires. One of the simpler methods of producing one-dimensional tin oxide nanomaterials is to combine the electrospinning method with a sol-gel process. The purpose of this work was to produce SnO2 nanowires using a hybrid electrospinning method combined with a heat treatment process at the temperature of 600 °C and to analyze the morphology and structure of the one-dimensional nanomaterial produced in this way. Analysis of the morphology of composite one-dimensional tin oxide nanostructures showed that smooth, homogeneous and crystalline nanowires were obtained. Full Text: PDF ReferencesN. Dharmaraj, C.H. Kim, K.W. Kim, H.Y. Kim, E.K. Suh, "Spectral studies of SnO2 nanofibres prepared by electrospinning method", Spectrochim. Acta - Part A Mol. Biomol. Spectrosc. 64, (2006) CrossRef N. Gao, H.Y. Li, W. Zhang, Y. Zhang, Y. Zeng, H. Zhixiang, ... & H. Liu, "QCM-based humidity sensor and sensing properties employing colloidal SnO2 nanowires", Sens. Actuators B Chem. 293, (2019), 129-135. CrossRef W. Ge, Y. Chang, V. Natarajan, Z. Feng, J. Zhan, X. Ma, "In2O3-SnO2 hybrid porous nanostructures delivering enhanced formaldehyde sensing performance", J.Alloys and Comp. 746, (2018) CrossRef M. Zhang, Y. Zhen, F. Sun, C. Xu, "Hydrothermally synthesized SnO2-graphene composites for H2 sensing at low operating temperature", Mater. Sci. Eng. B. 209, (2016), 37-44. CrossRef Y. Zhang, X. He, J. Li, Z. Miao, F. Huang, "Fabrication and ethanol-sensing properties of micro gas sensor based on electrospun SnO2 nanofibers", Sens. Actuators B Chem. 132, (2008), 67-73. CrossRef W.Q. Li, S.Y. Ma, J. Luo, Y.Z. Mao, L. Cheng, D.J. Gengzang, X.L. Xu, S H. Yan, "Synthesis of hollow SnO2 nanobelts and their application in acetone sensor", Mater. Lett. 132, (2014), 338-341. CrossRef E. Mudra, I. Shepa, O. Milkovic, Z. Dankova, A. Kovalcikova, A. Annusova, E. Majkova, J. Dusza, "Effect of iron doping on the properties of SnO2 nano/microfibers", Appl. Surf. Sci. 480, (2019), 876-881. CrossRef P. Mohanapriya, H. Segawa, K. Watanabe, K. Watanabe, S. Samitsu, T.S. Natarajan, N.V. Jaya, N. Ohashi, "Enhanced ethanol-gas sensing performance of Ce-doped SnO2 hollow nanofibers prepared by electrospinning", Sens. Actuators B Chem. 188, (2013), 872-878. CrossRef W.Q. Li, S.Y. Ma, Y.F. Li, X.B. Li, C.Y. Wang, X.H. Yang, L. Cheng, Y.Z. Mao, J. Luo, D.J. Gengzang, G.X. Wan, X.L. Xu, "Preparation of Pr-doped SnO2 hollow nanofibers by electrospinning method and their gas sensing properties", J.Alloys and Comp. 605, (2014), 80-88. CrossRef X.H. Xu, S.Y. Ma, X.L. Xu, T. Han, S.T. Pei, Y. Tie, P.F. Cao, W.W. Liu, B.J. Wang, R. Zhang, J.L. Zhang, "Ultra-sensitive glycol sensing performance with rapid-recovery based on heterostructured ZnO-SnO2 hollow nanotube", Mater. Lett, 273, (2020), 127967. CrossRef F. Li, X. Gao, R. Wang, T. Zhang, G. Lu, Sens. "Study on TiO2-SnO2 core-shell heterostructure nanofibers with different work function and its application in gas sensor", Actuators B Chem, 248, (2017), 812-819. CrossRef S. Bai, W. Guo, J. Sun, J. Li, Y. Tian, A. Chen, R. Luo, D. Li, "Synthesis of SnO2–CuO heterojunction using electrospinning and application in detecting of CO", Sens Actuators B Chem, 226, (2016), 96-103. CrossRef H. Du, P.J. Yao, Y. Sun, J. Wang, H. Wang, N. Yu, "Electrospinning Hetero-Nanofibers In2O3/SnO2 of Homotype Heterojunction with High Gas Sensing Activity", Sensors, 17, (2017), 1822. CrossRef X. Wang, H. Fan, P. Ren, "Electrospinning derived hollow SnO2 microtubes with highly photocatalytic property", Catal. Commun. 31, (2013), 37-41. CrossRef L. Cheng, S.Y. Ma, T.T. Wang, X.B. Li, J. Luo, W.Q. Li, Y.Z. Mao, D.J Gengzang, "Synthesis and characterization of SnO2 hollow nanofibers by electrospinning for ethanol sensing properties", Mater. Lett. 131, (2014), 23-26. CrossRef P.H. Phuoc, C.M. Hung, N.V. Toan, N.V. Duy, N.D. Hoa, N.V. Hieu, "One-step fabrication of SnO2 porous nanofiber gas sensors for sub-ppm H2S detection", Sens. Actuators A Phys. 303, (2020), 111722. CrossRef A.E. Deniz, H.A. Vural, B. Ortac, T. Uyar, "Gold nanoparticle/polymer nanofibrous composites by laser ablation and electrospinning", Matter. Lett. 65, (2011), 2941-2943. CrossRef S. Sagadevan, J. Podder, "Investigation on Structural, Surface Morphological and Dielectric Properties of Zn-doped SnO2 Nanoparticles", Mater. Res. 19, (2016), 420-425. CrossRef

Download Full-text