scholarly journals Three-dimensional hybrid graphene/nickel electrodes on zinc oxide nanorod arrays as non-enzymatic glucose biosensors

2017 ◽  
Vol 251 ◽  
pp. 462-471 ◽  
Author(s):  
Mozhdeh Mazaheri ◽  
Hossein Aashuri ◽  
Abdolreza Simchi
Keyword(s):  
Zinc Oxide ◽  
Three Dimensional ◽  
Nanorod Arrays ◽  
Glucose Biosensors ◽  
Nickel Electrodes

Nonstoichiometric Zinc Oxide Nanorod Arrays Doped Co or Ni as Effective Antimicrobial Materials

2012 ◽  
Vol 518-523 ◽  
pp. 760-763
Author(s):  
Chang Yun Chen ◽  
Quan Zhan Chen ◽  
Mei Shi ◽  
Feng Zhou ◽  
Chun Hua ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Zno Nanorod ◽  
Nanorod Arrays ◽  
Zno Nanorod Arrays ◽  
Functional Nanomaterials ◽  
Antimicrobial Materials ◽  
Doped Zno

Nonstoichiometric Zinc oxide (ZnO) nanorod arrays doped Co or Ni can be easily obtained by calicining soaked ZnO nanorod arrays. More importantly, the nonstoichiometric doped ZnO nanoarrays have more effective antimicrobial than pure ZnO nanoarrays, which means we can obtain a kind of promising new effective functional nanomaterials.

Three-dimensional (3D) palladium-zinc oxide nanowire nanofiber as photo-catalyst for water treatment

2016 ◽  
Vol 101 ◽  
pp. 362-369 ◽  
Author(s):  
Jungsu Choi ◽  
Sophia Chan ◽  
Hyunjong Joo ◽  
Heejae Yang ◽  
Frank K. Ko
Keyword(s):  
Zinc Oxide ◽  
Water Treatment ◽  
Three Dimensional ◽  
Photo Catalyst ◽  
Zinc Oxide Nanowire

A Review on Thermal Evaporation Method to Synthesis Zinc Oxide as Photocatalytic Material

2021 ◽  
Vol 31 ◽  
pp. 55-63
Author(s):  
Najiha Hamid ◽  
Syahida Suhaimi ◽  
Muhammad Zamir Othman ◽  
Wan Zakiah Wan Ismail
Keyword(s):  
Zinc Oxide ◽  
Vapour Deposition ◽  
Thermal Evaporation ◽  
Three Dimensional ◽  
Oxide Material ◽  
Physical Vapour Deposition ◽  
Evaporation Process ◽  
Zno Nanostructures ◽  
Thermal Evaporation Method ◽  
Photocatalytic Material

Zinc oxide (ZnO) is a metal oxide material that is interested in research due to its possibility of bandgap tailoring, doping with various types of materials as well as being able to form many structures from zero-dimensional to three-dimensional structures. All these properties allow ZnO to be used in broad applications. Several research studies have been reported on the synthesis of ZnO nanostructures by the physical vapour deposition (PVD) technique. One of the potential PVD technique is thermal evaporation process. Generally, the technique is used to grow thin-film but researchers have found a potential to be used in the growth of nanostructures due to the ability to provide high crystallinity with homogeneous and uniform nanostructures. This analysis will therefore explore more about the thermal evaporation synthesized ZnO nanostructures and the application as photocatalyst material in wastewater treatment.

Preparation and Antibacterial Performances of Electrocatalytic Zinc Oxide Nanoparticles with Diverse Morphologies

2021 ◽  
Vol 17 (9) ◽  
pp. 1824-1829
Author(s):  
Junlin Li ◽  
Xiangfei Li ◽  
Dong Liang ◽  
Xiaojuan Zhang ◽  
Qing Lin ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Surface Area ◽  
Zinc Oxide Nanoparticles ◽  
Average Particle Size ◽  
Three Dimensional ◽  
Diffusion Method ◽  
Oxide Nanoparticles ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Zno Nps

This study exploits the potential of zinc oxide nanoparticles (ZnO-NPs) with diverse morphologies as catalysts and antibacterial agent. Spherical ZnO-NPs, rod-shaped ZnO-NPs and flower-shaped ZnO-NPs were prepared by microemulsion method, solvent heat method and hydrothermal method, respectively. The structural characterizations of samples were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. XRD results revealed the formation of spherical ZnO-NPs, rod-shaped ZnO-NPs and flower-shaped ZnO-NPs were all wurtzite crystal structure. SEM results showed that spherical ZnO-NPs had an average particle size of 30–40 nm, rod-shaped ZnO-NPs were about 500 nm long and 100 nm wide with obvious hexagonal crystals. Flower-shaped ZnO-NPs had a three-dimensional appearance with obvious petals. Results of electrochemical HER (Hydrogen evolution reaction) experiments revealed that spherical ZnO-NPs exhibited the highest electrocatalytic activity at the lowest potential voltage due to their largest specific surface area. The antibacterial property of ZnO-NPs samples were studied by the optical density method and disc diffusion method. All samples had antibacterial effects against E. coli. and flower-shaped ZnO-NPs showed the best antibacterial activity due to the largest surface area in comparison with spherical ZnO-NPs and rod-shaped ZnO-NPs, which promised the maximum Zn2+ release as bactericide mechanism that registered in the case of different ZnO-NPs morphologies.

scholarly journals A Facile Fabrication of a Potentiometric Arrayed Glucose Biosensor Based on Nafion-GOx/GO/AZO

Sensors ◽  
2020 ◽  
Vol 20 (4) ◽  
pp. 964
Author(s):  
Jung-Chuan Chou ◽  
Si-Hong Lin ◽  
Tsu-Yang Lai ◽  
Po-Yu Kuo ◽  
Chih-Hsien Lai ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Low Cost ◽  
Glucose Biosensor ◽  
Average Sensitivity ◽  
Glucose Biosensors ◽  
Coating Method ◽  
Aluminum Doped Zinc Oxide ◽  
Screen Printing Technology

In this study, the potentiometric arrayed glucose biosensors, which were based on zinc oxide (ZnO) or aluminum-doped zinc oxide (AZO) sensing membranes, were fabricated by using screen-printing technology and a sputtering system, and graphene oxide (GO) and Nafion-glucose oxidase (GOx) were used to modify sensing membranes by using the drop-coating method. Next, the material properties were characterized by using a Raman spectrometer, a field-emission scanning electron microscope (FE-SEM), and a scanning probe microscope (SPM). The sensing characteristics of the glucose biosensors were measured by using the voltage–time (V-T) measurement system. Finally, electrochemical impedance spectroscopy (EIS) was conducted to analyze their charge transfer abilities. The results indicated that the average sensitivity of the glucose biosensor based on Nafion-GOx/GO/AZO was apparently higher than that of the glucose biosensor based on Nafion-GOx/GO/ZnO. In addition, the glucose biosensor based on Nafion-GOx/GO/AZO exhibited an excellent average sensitivity of 15.44 mV/mM and linearity of 0.997 over a narrow range of glucose concentration range, a response time of 26 s, a limit of detection (LOD) of 1.89 mM, and good reproducibility. In terms of the reversibility and stability, the hysteresis voltages (VH) were 3.96 mV and 2.42 mV. Additionally, the glucose biosensor also showed good anti-inference ability and reproducibility. According to these results, it is demonstrated that AZO is a promising material, which could be used to develop a reliable, simple, and low-cost potentiometric glucose biosensor.

Density-Controlled Electrodeposition Growth of Zinc Oxide Nanorod Arrays

2011 ◽  
Vol 11 (6) ◽  
pp. 4957-4967 ◽  
Author(s):  
Jianhang Qiu ◽  
Min Guo ◽  
Mei Zhang ◽  
Xidong Wang
Keyword(s):  
Zinc Oxide ◽  
Nanorod Arrays
Sign in / Sign up

Export Citation Format

Share Document