Ocular risks assessment in a central receiver solar power facility based on measured data of direct solar radiation

Solar Energy ◽  
2018 ◽  
Vol 164 ◽  
pp. 77-88 ◽  
Author(s):  
Danyela Samaniego Rascón ◽  
Almerindo D. Ferreira ◽  
Manuel C. Gameiro da Silva ◽  
Cuitlahuac Iriarte
Keyword(s):  
Solar Radiation ◽  
Solar Power ◽  
Measured Data ◽  
Direct Solar Radiation ◽  
Power Facility ◽  
Central Receiver ◽  
Risks Assessment

scholarly journals Skill of Direct Solar Radiation Predicted by the ECMWF Global Atmospheric Model over Australia

2014 ◽  
Vol 53 (11) ◽  
pp. 2571-2588 ◽  
Author(s):  
Alberto Troccoli ◽  
Jean-Jacques Morcrette
Keyword(s):  
Solar Radiation ◽  
Power Plants ◽  
Solar Power ◽  
Weather Prediction ◽  
Global Radiation ◽  
Atmospheric Model ◽  
Direct Solar Radiation ◽  
Efficient Production ◽  
Clear Sky ◽  
Sky Conditions

AbstractPrediction of direct solar radiation is key in sectors such as solar power and agriculture; for instance, it can enable more efficient production of energy from concentrating solar power plants. An assessment of the quality of the direct solar radiation forecast by two versions of the European Centre for Medium-Range Weather Forecasts (ECMWF) global numerical weather prediction model up to 5 days ahead is carried out here. The performance of the model is measured against observations from four solar monitoring stations over Australia, characterized by diverse geographic and climatic features, for the year 2006. As a reference, the performance of global radiation forecast is carried out as well. In terms of direct solar radiation, while the skill of the two model versions is very similar, and with relative mean absolute errors (rMAEs) ranging from 18% to 45% and correlations between 0.85 and 0.25 at around midday, their performance is substantially enhanced via a simple postprocessing bias-correction procedure. There is a marked dependency on cloudy conditions, with rMAEs 2–4 times as large for very cloudy-to-overcast conditions relative to clear-sky conditions. There is also a distinct dependency on the background climatic clear-sky conditions of the location considered. Tests made on a simulated operational setup targeting three quantiles show that direct radiation forecasts achieve potentially high scores. Overall, these analyses provide an indication of the potential practical use of direct irradiance forecast for applications such as solar power operations.

scholarly journals Calculated the diffuse and direct parts of global solar radiation in Baghdad city for the period (1983-2005) depending on clearness index by applying the two world models of Liu -Jordan

2019 ◽  
Vol 12 (25) ◽  
pp. 94-104
Author(s):  
Gheidaa Sabeeh Al-Hassany
Keyword(s):  
Solar Radiation ◽  
Global Solar Radiation ◽  
Measured Data ◽  
Direct Solar Radiation ◽  
Clearness Index

In this paper solar radiation was studied over a region of Baghdad (Latitude 33.3o and longitude 44.4o). The two parts of global solar radiation: diffuse and direct solar radiation were estimated depending on the clearance index of measured data (Average Monthly mean global solar radiation). Metrological data of measured (average monthly mean diffuse and direct solar radiation) were used to comparison the results and show the agreement between them. Results are determined by applying Liu and Jordan two models (1960). Excel 2007program is used in calculation, graphics and comparison the results.

scholarly journals The role of L/W in the solar radiation for Saharian cities

2019 ◽  
Vol 91 ◽  
pp. 05006
Author(s):  
Rami Qaoud ◽  
Alkama Djamal
Keyword(s):  
Solar Radiation ◽  
Solar Energy ◽  
Energy Levels ◽  
Direct Solar Radiation ◽  
Test Field ◽  
Natural Lighting ◽  
The Difference ◽  
The Impact ◽  
The Relationship

The urban fabric of the desert cities is based on the principle of reducing the impact of urban canyons on direct solar radiation. Here comes this research, which is based on a comparative study of the periods of direct solarisation and values of the solar energy of urban canyons via two urban fabrics that have different building densities, where the ratio between L/W is different. In order to obtain the real values of the solar energy (thermal, lighting), the test field was examined every two hours, each three consecutive days. The measurement stations are positioned by the three types of the relationship between L/W, (L≥2w, L=w, L≤0.5w). According to the results, we noticed and recorded the difference in the periods of direct solarization between the types of urban engineering canyons, reaching 6 hours a day, the difference in thermal values of air, reaching 4 °C, and the difference in periods of direct natural lighting, reaching 6 hours. It should be noted that the role of the relationship between L/W is to protect the urban canyons by reducing the impact of direct solar radiation on urban canyons, providing longer hours of shading, and reducing solar energy levels (thermal, lighting) at the urban canyons. This research is classified under the research axis (the studies of external spaces in the urban environment according to the bioclimatic approach and geographic approach). But this research aims to focus on the tracking and studying the distribution of the solar radiation - thermal radiation and lighting radiation - in different types of street canyons by comparing the study of the direct solarization periods of each type and the quantity of solar energy collected during the solarization periods.

Dynamic Modeling of Solar Radiation Disturbances Based on a Biomimetic Cloud Shading Model

2018 ◽  
Vol 140 (2) ◽  
Author(s):  
Jesús García ◽  
Iván Portnoy ◽  
Ricardo Vasquez Padilla ◽  
Marco E. Sanjuan
Keyword(s):  
Time Series ◽  
Solar Radiation ◽  
Control Strategies ◽  
Ground Level ◽  
Direct Solar Radiation ◽  
Complex Phenomenon ◽  
Two Dimensional ◽  
Multi Objective Optimization ◽  
Tuning Parameters ◽  
Radiation Time

Variation in direct solar radiation is one of the main disturbances that any solar system must handle to maintain efficiency at acceptable levels. As known, solar radiation profiles change due to earth's movements. Even though this change is not manipulable, its behavior is predictable. However, at ground level, direct solar radiation mainly varies due to the effect of clouds, which is a complex phenomenon not easily predictable. In this paper, dynamic solar radiation time series in a two-dimensional (2D) spatial domain are obtained using a biomimetic cloud-shading model. The model is tuned and compared against available measurement time series. The procedure uses an objective function based on statistical indexes that allow extracting the most important characteristics of an actual set of curves. Then, a multi-objective optimization algorithm finds the tuning parameters of the model that better fit data. The results showed that it is possible to obtain responses similar to real direct solar radiation transients using the biomimetic model, which is useful for other studies such as testing control strategies in solar thermal plants.

scholarly journals Comparative Modeling of a Parabolic Trough Collectors Solar Power Plant with MARS Models

Energies ◽  
2017 ◽  
Vol 11 (1) ◽  
pp. 37 ◽  
Author(s):  
Jose Rogada ◽  
Lourdes Barcia ◽  
Juan Martinez ◽  
Mario Menendez ◽  
Francisco de Cos Juez
Keyword(s):  
Heat Transfer ◽  
Water Vapor ◽  
Power Plant ◽  
Solar Radiation ◽  
Thermal Energy ◽  
Power Plants ◽  
Solar Power ◽  
Rankine Cycle ◽  
Heat Transfer Fluid ◽  
Solar Field

Power plants producing energy through solar fields use a heat transfer fluid that lends itself to be influenced and changed by different variables. In solar power plants, a heat transfer fluid (HTF) is used to transfer the thermal energy of solar radiation through parabolic collectors to a water vapor Rankine cycle. In this way, a turbine is driven that produces electricity when coupled to an electric generator. These plants have a heat transfer system that converts the solar radiation into heat through a HTF, and transfers that thermal energy to the water vapor heat exchangers. The best possible performance in the Rankine cycle, and therefore in the thermal plant, is obtained when the HTF reaches its maximum temperature when leaving the solar field (SF). In addition, it is necessary that the HTF does not exceed its own maximum operating temperature, above which it degrades. The optimum temperature of the HTF is difficult to obtain, since the working conditions of the plant can change abruptly from moment to moment. Guaranteeing that this HTF operates at its optimal temperature to produce electricity through a Rankine cycle is a priority. The oil flowing through the solar field has the disadvantage of having a thermal limit. Therefore, this research focuses on trying to make sure that this fluid comes out of the solar field with the highest possible temperature. Modeling using data mining is revealed as an important tool for forecasting the performance of this kind of power plant. The purpose of this document is to provide a model that can be used to optimize the temperature control of the fluid without interfering with the normal operation of the plant. The results obtained with this model should be necessarily contrasted with those obtained in a real plant. Initially, we compare the PID (proportional–integral–derivative) models used in previous studies for the optimization of this type of plant with modeling using the multivariate adaptive regression splines (MARS) model.

scholarly journals Solar Thermal Power: Appraisal of Solar Power Towers

2018 ◽  
Vol 225 ◽  
pp. 04003
Author(s):  
Hashem Shatnawi ◽  
Chin Wai Lim ◽  
Firas Basim Ismail
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Solar Power ◽  
Thermal Power ◽  
Tube Material ◽  
Power Cycles ◽  
Solar Thermal Power ◽  
Central Receiver ◽  
Receiver System ◽  
Solar Power Tower

This study delves into several engineering procedures related to solar power tower plants. These installations come with central receiver system technologies and high-temperature power cycles. Besides a summary emphasizing on the fundamental components of a solar power tower, this paper also forwards a description of three receiver designs. Namely, these are the tubular receiver, the volumetric receiver and the direct absorber receiver. A variety of heat transfer mediums were assessed, while a comprehensive explanation was provided on the elements of external solar cylindrical receivers. This explanation covers tube material, molten salt, tube diameter and heat flux.

Sign in / Sign up

Export Citation Format

Share Document