Effect of laser re-melting on electric current assistive sintered CoCrFeNiAlxTiy high entropy alloys: Formation, micro-hardness and wear behaviors

2020 ◽  
Vol 399 ◽  
pp. 126179 ◽  
Author(s):  
Azmi Erdogan ◽  
Kadir Mert Döleker ◽  
Sakin Zeytin
2014 ◽  
Vol 789 ◽  
pp. 79-83 ◽  
Author(s):  
Xing Yan Gao ◽  
Ning Liu ◽  
Yun Xue Jin ◽  
Zhi Xuan Zhu

The effects of Co contents on the microstructure characteristic and phase structure of CoxCrCuFeNi high-entropy alloys were investigated by SEM, EDS and XRD. The microstructures consisted of dendrites and many nanoprecipitations in the interdendritic. Increase Co contents,the size of nanoprecipitated phase in the interdendritic firstly increased and then decreased slightly. According to XRD analysis, two simple FCC phases, dendrite phase and Cu-rich interdendritic phase were found. As a result of slow diffusion, supersaturated solid solution was formed during solidification and then nanophase was precipitated during the following cooling process. The results of EDS revealed that Fe、Co and Cr were rich in dendrites, while Cu was rich at the interdendritic. For element Ni, which was rich in dendrites when x≤1.0, but was almost the normal value in dendrites for x>1.0. The reason for segregation was related to the positive mixing enthalpy between elements. The contents of Co had little impact on the hardness of CoxCrCuFeNi high-entropy alloys according to micro-hardness testing.


2018 ◽  
Vol 941 ◽  
pp. 1111-1116 ◽  
Author(s):  
Antoine Lacour-Gogny-Goubert ◽  
Zhao Zhao-Huvelin ◽  
Agnès Bachelier-Locq ◽  
Ivan Guillot ◽  
Anne Denquin

The objective of this study is the evaluation of high entropy alloys for aeroengines applications up to 1000°C. AlxNbMoTiV alloys with 10 and 20 at.% Al have been produced by arc melting. As-cast microstructure and phase transformations during heat treatments have been investigated through SEM, DRX and TEM, revealing the possibility of homogenization at 1400°C and the stability of the BCC structure at 1000°C and 800°C for both alloys. Mechanical properties have been evaluated through micro-hardness and compression tests up to 800°C. It appears that, although both alloys show a similar microstructure and hardness evolution with heat treatment, the Alloy containing 10 at.% of Al show a higher yield strength at room temperature and 800°C, related to the brittle character of the alloy containing 20 at.% of Al.


2019 ◽  
Author(s):  
Jack Pedersen ◽  
Thomas Batchelor ◽  
Alexander Bagger ◽  
Jan Rossmeisl

Using the high-entropy alloys (HEAs) CoCuGaNiZn and AgAuCuPdPt as starting points we provide a framework for tuning the composition of disordered multi-metallic alloys to control the selectivity and activity of the reduction of carbon dioxide (CO2) to highly reduced compounds. By combining density functional theory (DFT) with supervised machine learning we predicted the CO and hydrogen (H) adsorption energies of all surface sites on the (111) surface of the two HEAs. This allowed an optimization for the HEA compositions with increased likelihood for sites with weak hydrogen adsorption{to suppress the formation of molecular hydrogen (H2) and with strong CO adsorption to favor the reduction of CO. This led to the discovery of several disordered alloy catalyst candidates for which selectivity towards highly reduced carbon compounds is expected, as well as insights into the rational design of disordered alloy catalysts for the CO2 and CO reduction reaction.


2020 ◽  
Vol 2020 (4) ◽  
pp. 16-22
Author(s):  
A.I. Ustinov ◽  
◽  
V.S. Skorodzievskii ◽  
S.A. Demchenkov ◽  
S.S. Polishchuk ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document