scholarly journals A high-static-low-dynamics stiffness vibration isolator via an elliptical ring

2022 ◽  
Vol 162 ◽  
pp. 108061
Author(s):  
Wen-Ju Han ◽  
Ze-Qi Lu ◽  
Mu-Qing Niu ◽  
Li-Qun Chen
Keyword(s):  
Vibration Isolator ◽  
Elliptical Ring

Vibration Isolator System for Electron Microscope

1990 ◽  
Vol 48 (1) ◽  
pp. 182-183
Author(s):  
K. Ohi ◽  
M. Mizuno ◽  
T. Kasai ◽  
Y. Ohkura ◽  
K. Mizuno ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Magnetic Fields ◽  
Environmental Conditions ◽  
Vibration Isolator ◽  
Air Conditioners ◽  
Vibration Isolators ◽  
Large Size ◽  
Electron Microscopes

In recent years, with electron microscopes coming into wider use, their installation environments do not necessarily give their performance full play. Their environmental conditions include air-conditioners, magnetic fields, and vibrations. We report a jointly developed entirely new vibration isolator which is effective against the vibrations transmitted from the floor.Conventionally, large-sized vibration isolators which need the digging of a pit have been used. These vibration isolators, however, are large present problems of installation and maintenance because of their large-size.Thus, we intended to make a vibration isolator which1) eliminates the need for changing the installation room2) eliminates the need of maintenance and3) are compact in size and easily installable.

Beneficial performance of a quasi-zero stiffness vibration isolator with generalized geometric nonlinear damping

2020 ◽  
pp. 095745652097238
Author(s):  
Chun Cheng ◽  
Ran Ma ◽  
Yan Hu
Keyword(s):  
Damping Ratio ◽  
Nonlinear Damping ◽  
Vibration Isolator ◽  
Equivalent Damping ◽  
Frequency Responses ◽  
Geometric Nonlinear ◽  
Resonant Region ◽  
Force Transmissibility ◽  
Isolation Performance ◽  
Force And Displacement Transmissibility

Generalized geometric nonlinear damping based on the viscous damper with a non-negative velocity exponent is proposed to improve the isolation performance of a quasi-zero stiffness (QZS) vibration isolator in this paper. Firstly, the generalized geometric nonlinear damping characteristic is derived. Then, the amplitude-frequency responses of the QZS vibration isolator under force and base excitations are obtained, respectively, using the averaging method. Parametric analysis of the force and displacement transmissibility is conducted subsequently. At last, two phenomena are explained from the viewpoint of the equivalent damping ratio. The results show that decreasing the velocity exponent of the horizontal damper is beneficial to reduce the force transmissibility in the resonant region. For the case of base excitation, it is beneficial to select a smaller velocity exponent only when the nonlinear damping ratio is relatively large.

scholarly journals None sharp corner localized surface plasmons resonance based ultrathin metasurface single layer quarter wave plate

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Qinyu Qian ◽  
Pengfei Liu ◽  
Li Fan ◽  
Liang Zhao ◽  
Chinhua Wang
Keyword(s):  
Surface Plasmons ◽  
Amplitude Ratio ◽  
Single Layer ◽  
Quarter Wave Plate ◽  
Localized Surface Plasmons ◽  
Sharp Corner ◽  
Wave Plate ◽  
Nanophotonic Devices ◽  
Elliptical Ring ◽  
Quarter Wave

AbstractWe report on a non-sharp-corner quarter wave plate (NCQW) within the single layer of only 8 nm thickness structured by the Ag hollow elliptical ring array, where the strong localized surface plasmons (LSP) resonances are excited. By manipulating the parameters of the hollow elliptical ring, the transmitted amplitude and phase of the two orthogonal components are well controlled. The phase difference of π/2 and amplitude ratio of 1 is realized simultaneously at the wavelength of 834 nm with the transmission of 0.46. The proposed NCQW also works well in an ultrawide wavelength band of 110 nm, which suggests an efficient way of exciting LSP resonances and designing wave plates, and provides a great potential for advanced nanophotonic devices and integrated photonic systems.

Estimation of the Linearized Damping Coefficients of a Squeeze-Film Vibration Isolator

1987 ◽  
Vol 201 (3) ◽  
pp. 181-191 ◽  
Author(s):  
R Stanway ◽  
R Firoozian ◽  
J E Mottershead
Keyword(s):  
Single Frequency ◽  
Squeeze Film ◽  
Experimental Facility ◽  
Vibration Isolator ◽  
New Approach ◽  
Filtering Algorithm ◽  
Damping Coefficients ◽  
Performance Predictions ◽  
Frequency Excitation ◽  
Extract Information

In this paper the authors present experimental confirmation of the feasibility of a new approach to the estimation of the four damping coefficients associated with a squeeze-film vibration isolator. The design and construction of the experimental facility is described in detail. A time-domain filtering algorithm is applied to process the displacement responses to single-frequency excitation and thus extract information on the linearized dynamics of the squeeze-film. The estimated coefficients are validated by comparing performance predictions with those obtained from spectrum analysis and from short-bearing theory. The significance of the results is discussed and suggestions are made for further work in this area.

Modeling, Actuation, and Control of an Active Fluid Vibration Isolator

1997 ◽  
Vol 119 (1) ◽  
pp. 52-59 ◽  
Author(s):  
M. J. Panza ◽  
D. P. McGuire ◽  
P. J. Jones
Keyword(s):  
Electrical Power ◽  
Fluid Pressure ◽  
Space Representation ◽  
Vibration Isolator ◽  
Mass System ◽  
Integral Control ◽  
Active Fluid ◽  
State Space Representation ◽  
In Series ◽  
And Control

An integrated mathematical model for the dynamics, actuation, and control of an active fluid/elastomeric tuned vibration isolator in a two mass system is presented. The derivation is based on the application of physical principles for mechanics, fluid continuity, and electromagnetic circuits. Improvement of the passive isolator performance is obtained with a feedback scheme consisting of a frequency shaped notch compensator in series with integral control of output acceleration and combined with proportional control of the fluid pressure in the isolator. The control is applied via an electromagnetic actuator for excitation of the fluid in the track connecting the two pressure chambers of the isolator. Closed loop system equations are transformed to a nondimensional state space representation and a key dimensionless parameter for isolator-actuator interaction is defined. A numerical example is presented to show the effect of actuator parameter selection on system damping, the performance improvement of the active over the passive isolator, the robustness of the control scheme to parameter variation, and the electrical power requirements for the actuator.

A novel active vibration isolator applied for micro-gyro by array of deposited electrodes

2009 ◽  
Vol 15 (7) ◽  
pp. 1017-1026
Author(s):  
Nan-Chyuan Tsai ◽  
Chung-Yang Sue ◽  
Bing-Hong Liou
Keyword(s):  
Vibration Isolator ◽  
Active Vibration
Sign in / Sign up

Export Citation Format

Share Document