Gas flow regimes in fluidized-bed combustors

2002 ◽  
Vol 29 (1) ◽  
pp. 819-826 ◽  
Author(s):  
Alan L.T. Wang ◽  
Stephen J. Clough ◽  
John F. Stubington
Keyword(s):  
Fluidized Bed ◽  
Gas Flow ◽  
Flow Regimes

Gas flow in a pressurized fluidized-bed combustor

1988 ◽  
Vol 56 (3) ◽  
pp. 157-163 ◽  
Author(s):  
J. Thýn ◽  
Z. Kolar ◽  
W. Martens ◽  
A. Korving
Keyword(s):  
Fluidized Bed ◽  
Gas Flow ◽  
Fluidized Bed Combustor

The Pyrocarbon Deposition Techniques of Mechanical Heart Valve Prostheses

2011 ◽  
Vol 464 ◽  
pp. 749-752 ◽  
Author(s):  
Jian Hui Zhang ◽  
Xin Chen
Keyword(s):  
Fluidized Bed ◽  
Heart Valve ◽  
Gas Flow ◽  
Mechanical Heart Valve ◽  
Carbon Matrix ◽  
Artificial Heart Valve ◽  
Bed Temperature ◽  
Wide Range ◽  
Isotropic Carbon ◽  
Deposition Conditions

The structure and property of pyrocarbon varies widely with different deposition conditions. The isotropic carbon which can only been deposited in the bed of fluidized particles is very important in biomedical fields, for instance, it is often used as the coating of artificial heart valve components. The deposition of isotropic pyrocarbon containing silicon is experimented in fluidized bed over a wide range of deposition conditions. The results show that bed temperature influences strongly average coating rate, coating density, silicon content and coating micro-hardness. Propane concentration has a much effect on coating density, carbon matrix density and isotropic characteristics. Total gas flow rate and inlet dimension of fluidized bed affect the formation of fluidized bed.

CFD-DEM Modeling of CO2 Capture using Alkali Metal-Based Sorbents in a Bubbling Fluidized Bed

2014 ◽  
Vol 12 (1) ◽  
pp. 441-449 ◽  
Author(s):  
Zhonglin Zhang ◽  
Daoyin Liu ◽  
Yaming Zhuang ◽  
Qingmin Meng ◽  
Xiaoping Chen
Keyword(s):  
Fluidized Bed ◽  
Gas Flow ◽  
Fluidized Bed Reactors ◽  
Solid Sorbents ◽  
Bubbling Fluidized Bed ◽  
Shrinking Core ◽  
Simulation And Experiment ◽  
Kinetics Simulation ◽  
Reaction Processes ◽  
Back Mixing

Abstract This paper describes a CFD-DEM modeling of CO2 capture using K2CO3 solid sorbents in a bubbling fluidized bed, which takes into heat transfer, hydrodynamics, and chemical reactions. Shrinking core model is applied in reaction kinetics. Simulation and experiment results of bed pressure drop and CO2 concentration in the reactor exit agree well. Instantaneous dynamics as well as time-averaged profiles indicate detailed characteristics of gas flow, particle motion, and chemical reaction processes. The simulation results show an obvious core-annular flow and strong back-mixing flow pattern. CO2 concentration decreases gradually along the bed height, while regards on the lateral distribution CO2 concentration near the wall is lower than that in the middle zone where gas passes through faster. The effect of bubbles on CO2 reaction is two-sided: it can promote mixing which strengthens reaction, while it can be a short pass of gas which is not beneficial to reaction. The simulation is helpful for further understanding and optimal design of fluidized bed reactors of CO2 capture.

scholarly journals Nanopowder Fluidization Using the Combined Assisted Fluidization Techniques of Particle Mixing and Flow Pulsation

2019 ◽  
Vol 9 (3) ◽  
pp. 572 ◽  
Author(s):  
Syed Ali ◽  
Avijit Basu ◽  
Sulaiman Alfadul ◽  
Mohammad Asif
Keyword(s):  
Fluidized Bed ◽  
Gas Flow ◽  
Substantial Reduction ◽  
Data Acquisition System ◽  
Gas Flow Rate ◽  
Flow Pulsation ◽  
Pressure Transducers ◽  
Particle Mixing ◽  
Group A ◽  
Sensitive Pressure

In the present study, we report the fluidization behavior of ultrafine nanopowder using the assisted fluidization technique of particle mixing, which was further superimposed with the pulsation of the inlet gas flow to the fluidized bed. The powder selected in the present study was hydrophilic nanosilica, which shows strong agglomeration behavior leading to poor fluidization hydrodynamics. For particle mixing, small proportions of inert particles of Geldart group A classification were used. The inlet gas flow to the fluidized bed was pulsed with a square wave of frequency 0.1 Hz with the help of a solenoid valve controlled using the data acquisition system (DAQ). In addition to the gas flow rate to the fluidized bed, pressure transients were carefully monitored using sensitive pressure transducers connected to the DAQ. Our results indicate a substantial reduction in the effective agglomerate size as a result of the simultaneous implementation of the assisted fluidization techniques of particle mixing and flow pulsation.

Predicting bed dynamics in three-phase, fluidized-bed biofilm reactors

1994 ◽  
Vol 29 (10-11) ◽  
pp. 231-241 ◽  
Author(s):  
H. T. Chang ◽  
B. E. Rittmann
Keyword(s):  
Fluidized Bed ◽  
Flow Rate ◽  
Liquid Flow ◽  
Gas Flow ◽  
Liquid Flow Rate ◽  
Gas Flow Rate ◽  
Biofilm Growth ◽  
Biofilm Thickness ◽  
Three Phase ◽  
Proper Design

This paper presents a unified model that inter-relates gas flow rate, liquid flow rate, and hold-ups of each of the liquid, gas, and solid phases in three-phase, fluidized-bed biofilm (TPFBB) process. It describes how carrier properties, biofilm properties, and gas and liquid flow velocities control the system dynamics, which ultimately will affect the density, thickness, and distribution of the biofilm. The paper describes the development of the mathematical model to correlate the effects of gas flow rate, liquid flow rate, solid concentration, and biofilm thickness and density. This knowledge is critically needed in light of the use of TPFBB processes in treating industrial wastewater, which often has high substrate concentration. For example, the proper design of the TPFBB process requires mathematical description of the cause-effect relationship between biofilm growth and fluidization.

Dynamic simulation of the circulating fluidized bed loop performance under the various operating conditions

2019 ◽  
Vol 233 (7) ◽  
pp. 901-913 ◽  
Author(s):  
Seongil Kim ◽  
Sangmin Choi ◽  
Jari Lappalainen ◽  
Tae-Ho Song
Keyword(s):  
Heat Transfer ◽  
Fluidized Bed ◽  
Heat Transfer Rate ◽  
Dynamic Simulation ◽  
Transfer Rate ◽  
Gas Flow ◽  
Circulating Fluidized Bed ◽  
Operating Conditions ◽  
Temperature Behavior ◽  
Furnace Temperature

In a circulating fluidized bed boiler, the large thermal mass and flow characteristics of the solids strongly affect the transient response of the circulating fluidized bed loop temperature, which determines the heat transfer rate to steam flow. Therefore, it is essential to interpret the dynamic response of the solid behavior in the circulating fluidized bed loop for the stable and efficient operation of the circulating fluidized bed boiler. In this study, the dynamic simulation of the solid behavior along with the flue gas flow in a circulating fluidized bed loop was performed by applying the core-annulus approach for the solid-gas flow inside the furnace and selected models for other physical phenomena of the fluidized bed. The circulating fluidized bed loop of a commercial boiler was selected as the target system. Especially, the model simulates the characteristics of the solid behavior, such as the local solid mass distribution, and the solid flow inside the furnace and the circulating solid according to the various operating conditions. These aspects are difficult to measure and quantify in a real power plant. In this paper, the simulated furnace temperature behavior as the representative performance parameter of the circulating fluidized bed loop was discussed along with the qualitative operation experiences reported in the literature. The operating conditions include the feed rate of fuel and air, the particle size, the solid inventory and the solid circulation rate. Furnace temperature behavior was reproduced through the simulation for each operating case in the literature and was analyzed with the solid behavior along with the combustion rate and heat transfer rate of the circulating fluidized bed loop. The simulation enables quantitative evaluation of the effect of the solid behavior on the temperatures of the furnace and return part in the various operating conditions.

Sign in / Sign up

Export Citation Format

Share Document