Advanced Modeling with the MATLAB Reservoir Simulation Toolbox

2021 ◽  

Many leading experts contribute to this follow-up to An Introduction to Reservoir Simulation using MATLAB/GNU Octave: User Guide for the MATLAB Reservoir Simulation Toolbox (MRST). It introduces more advanced functionality that has been recently added to the open-source MRST software. It is however a self-contained introduction to a variety of modern numerical methods for simulating multiphase flow in porous media, with applications to geothermal energy, chemical enhanced oil recovery (EOR), flow in fractured and unconventional reservoirs, and in the unsaturated zone. The reader will learn how to implement new models and algorithms in a robust, efficient manner. A large number of numerical examples are included, all fully equipped with code and data so that the reader can reproduce the results and use them as a starting point for their own work. Like the original textbook, this book will prove invaluable for researchers, professionals and advanced students using reservoir simulation methods.

Geriatrics ◽  
2021 ◽  
Vol 6 (1) ◽  
pp. 29
Author(s):  
Kristina Marie Kokorelias ◽  
Einat Danieli ◽  
Sheila Dunn ◽  
Sid Feldman ◽  
David Patrick Ryan ◽  
...  

The number of family caregivers to individuals with dementia is increasing. Family physicians are often the first point of access to the health care system for individuals with dementia and their caregivers. Caregivers are at an increased risk of developing negative physical, cognitive and affective health problems themselves. Caregivers also describe having unmet needs to help them sustain care in the community. Family physicians are in a unique position to help support caregivers and individuals with dementia, but often struggle with keeping up with best practice dementia service knowledge. The Dementia Wellness Questionnaire was designed to serve as a starting point for discussions between caregivers and family physicians by empowering caregivers to communicate their needs and concerns and to enhance family physicians’ access to specific dementia support information. The DWQ aims to alert physicians of caregiver and patient needs. This pilot study aimed to explore the experiences of physicians and caregivers of people using the Questionnaire in two family medicine clinics in Ontario, Canada. Interviews with physicians and caregivers collected data on their experiences using the DWQ following a 10-month data gathering period. Data was analyzed using content analysis. Results indicated that family physicians may have an improved efficacy in managing dementia by having dementia care case specific guidelines integrated within electronic medical records. By having time-efficient access to tailored supports, family physicians can better address the needs of the caregiver–patient dyad and help support family caregivers in their caregiving role. Caregivers expressed that the Questionnaire helped them remember concerns to bring up with physicians, in order to receive help in a more efficient manner.


2021 ◽  
Author(s):  
Olaitan Akinyele ◽  
Karl D. Stephen

Abstract Numerical simulation of surfactant flooding using conventional reservoir simulation models can lead to unreliable forecasts and bad decisions due to the appearance of numerical effects. The simulations give approximate solutions to systems of nonlinear partial differential equations describing the physical behavior of surfactant flooding by combining multiphase flow in porous media with surfactant transport. The approximations are made by discretization of time and space which can lead to spurious pulses or deviations in the model outcome. In this work, the black oil model was simulated using the decoupled implicit method for various conditions of reservoir scale models to investigate behaviour in comparison with the analytical solution obtained from fractional flow theory. We investigated changes to cell size and time step as well as the properties of the surfactant and how it affects miscibility and flow. The main aim of this study was to understand pulse like behavior that has been observed in the water bank to identify cause and associated conditions. We report for the first time that the pulses occur in association with the simulated surfactant water flood front and are induced by a sharp change in relative permeability as the interfacial tension changes. Pulses are diminished when the adsorption rate was within the value of 0.0002kg/kg to 0.0005kg/kg. The pulses are absent for high resolution model of 5000 cells in x direction with a typical cell size as used in well-scale models. The growth or damping of these pulses may vary from case to case but in this instance was a result of the combined impact of relative mobility, numerical dispersion, interfacial tension and miscibility. Oil recovery under the numerical problems reduced the performance of the flood, due to large amounts of pulses produced. Thus, it is important to improve existing models and use appropriate guidelines to stop oscillations and remove errors.


2021 ◽  
Author(s):  
L. Hendraningrat

In low oil price environments, conducting affordable enhanced oil recovery (EOR) projects can be very challenging. One item of interest for successful future EOR should be in how produced fluids are treated and how to achieve cost-efficiency. Nanoflooding, is an emerging EOR technique, which has attracted deployment in recent years. Meanwhile, Indonesia continues to progress towards the national oil and gas production target of one million barrels per day by 2030. This paper presents the observation of opportunities and challenges of using nanoflooding to enable oil and gas production in Indonesia to achieve its desired targets. The study began by mapping the pain points in major oilfields in Indonesia. We observed and discussed the advantage and limitation of traditional mature EOR techniques, status, and ongoing application of EOR in Indonesia. Then, we briefly explained the main reasons why nanoflooding can be considered for future implementation in accelerating oil production in Indonesia, including a discussion about a successful pilot test. As an emerging EOR technique, nanoflooding can be considered as a cost-efficient technique. Silica-based nanofluid can be accessed in a cost-efficient manner and can be executed from an implementation standpoint considering surface facilities. The mechanism that is introduced can help to displace incremental oil more effectively since it can go inside pore throats due to the nano-size. We observed several recognized benefits and challenges to deploy nanoflooding in Indonesia. Based on this study, nanoflooding is very attractive and has potential to be implemented.


2021 ◽  
Author(s):  
Robert Downey ◽  
Kiran Venepalli ◽  
Jim Erdle ◽  
Morgan Whitelock

Abstract The Permian Basin of west Texas is the largest and most prolific shale oil producing basin in the United States. Oil production from horizontal shale oil wells in the Permian Basin has grown from 5,000 BOPD in February, 2009 to 3.5 Million BOPD as of October, 2020, with 29,000 horizontal shale oil wells in production. The primary target for this horizontal shale oil development is the Wolfcamp shale. Oil production from these wells is characterized by high initial rates and steep declines. A few producers have begun testing EOR processes, specifically natural gas cyclic injection, or "Huff and Puff", with little information provided to date. Our objective is to introduce a novel EOR process that can greatly increase the production and recovery of oil from shale oil reservoirs, while reducing the cost per barrel of recovered oil. A superior shale oil EOR method is proposed that utilizes a triplex pump to inject a solvent liquid into the shale oil reservoir, and an efficient method to recover the injectant at the surface, for storage and reinjection. The process is designed and integrated during operation using compositional reservoir simulation in order to optimize oil recovery. Compositional simulation modeling of a Wolfcamp D horizontal producing oil well was conducted to obtain a history match on oil, gas, and water production. The matched model was then utilized to evaluate the shale oil EOR method under a variety of operating conditions. The modeling indicates that for this particular well, incremental oil production of 500% over primary EUR may be achieved in the first five years of EOR operation, and more than 700% over primary EUR after 10 years. The method, which is patented, has numerous advantages over cyclic gas injection, such as much greater oil recovery, much better economics/lower cost per barrel, lower risk of interwell communication, use of far less horsepower and fuel, shorter injection time, longer production time, smaller injection volumes, scalability, faster implementation, precludes the need for artificial lift, elimination of the need to buy and sell injectant during each cycle, ability to optimize each cycle by integration with compositional reservoir simulation modeling, and lower emissions. This superior shale oil EOR method has been modeled in the five major US shale oil plays, indicating large incremental oil recovery potential. The method is now being field tested to confirm reservoir simulation modeling projections. If implemented early in the life of a shale oil well, its application can slow the production decline rate, recover far more oil earlier and at lower cost, and extend the life of the well by several years, while precluding the need for artificial lift.


Processes ◽  
2018 ◽  
Vol 6 (10) ◽  
pp. 178 ◽  
Author(s):  
Richeng Liu ◽  
Yujing Jiang

The fluid flow in fractured porous media plays a significant role in the characteristic/assessment of deep underground reservoirs such as CO2 sequestration [1–3], enhanced oil recovery [4,5] and geothermal energy development [...]


Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1225 ◽  
Author(s):  
Xiankang Xin ◽  
Gaoming Yu ◽  
Zhangxin Chen ◽  
Keliu Wu ◽  
Xiaohu Dong ◽  
...  

The flow of polymer solution and heavy oil in porous media is critical for polymer flooding in heavy oil reservoirs because it significantly determines the polymer enhanced oil recovery (EOR) and polymer flooding efficiency in heavy oil reservoirs. In this paper, physical experiments and numerical simulations were both applied to investigate the flow of partially hydrolyzed polyacrylamide (HPAM) solution and heavy oil, and their effects on polymer flooding in heavy oil reservoirs. First, physical experiments determined the rheology of the polymer solution and heavy oil and their flow in porous media. Then, a new mathematical model was proposed, and an in-house three-dimensional (3D) two-phase polymer flooding simulator was designed considering the non-Newtonian flow. The designed simulator was validated by comparing its results with those obtained from commercial software and typical polymer flooding experiments. The developed simulator was further applied to investigate the non-Newtonian flow in polymer flooding. The experimental results demonstrated that the flow behavior index of the polymer solution is 0.3655, showing a shear thinning; and heavy oil is a type of Bingham fluid that overcomes a threshold pressure gradient (TPG) to flow in porous media. Furthermore, the validation of the designed simulator was confirmed to possess high accuracy and reliability. According to its simulation results, the decreases of 1.66% and 2.49% in oil recovery are caused by the difference between 0.18 and 1 in the polymer solution flow behavior indexes of the pure polymer flooding (PPF) and typical polymer flooding (TPF), respectively. Moreover, for heavy oil, considering a TPG of 20 times greater than its original value, the oil recoveries of PPF and TPF are reduced by 0.01% and 5.77%, respectively. Furthermore, the combined effect of shear thinning and a threshold pressure gradient results in a greater decrease in oil recovery, with 1.74% and 8.35% for PPF and TPF, respectively. Thus, the non-Newtonian flow has a hugely adverse impact on the performance of polymer flooding in heavy oil reservoirs.


2014 ◽  
Vol 38 (3) ◽  
pp. 271 ◽  
Author(s):  
Anthony Bell ◽  
Alastair Cochrane ◽  
Sally Courtice ◽  
Kathy Flanigan ◽  
Mandeep Mathur ◽  
...  

Objective The aim of Queen Elizabeth II Jubilee Hospital (QEII) redesign project (QEII United) was to enhance timely access to an inpatient bed and maximise opportunities to value add during the inpatient episode of care. Methods A tripartite relationship between the hospital team, system manager and external consultants. The team, QEII United, was formed to ‘diagnose, solve and implement’ change under the unifying metaphorical banner of a football team. A marketing strategy and communication plan targeted the key ‘players’ and outlined the ‘game plan’. Baseline data were collected, analysed and reported in keeping with key aims. Strategies for systems improvement implementation were attached to key performance indicators (KPIs). Results Thematic KPIs were developed to embed internal process change to reflect the contributions made towards the National Emergency Access Target (NEAT) at each stage of the patient journey. As such, access block of under 20%, morning discharge rates of 50% before midday, reduced length of stay for selected elective orthopaedic and general medical diagnostic related groupings (DRGs; i.e. relative stay index ≤1) and hospital in the home (HITH) utilisation rates 1.5% of all admissions were all met. Key to sustainability was the transfer of clinical redesign skills to hospital staff and the fostering of emergent ground up leadership. Conclusions QEII United’s success has been underpinned by the development of themed solution areas developed by the hospital staff themselves. Robust baseline data analysis used in combination with nationally available benchmarking data provided a quantitative starting point for the work. The collaborative elements of the program re-energised the hospital team, who were kept informed by targeted communications, to establish quick wins and build trust and momentum for the more challenging areas. What is known about the topic? Clinical redesign is now commonly used to understand, define and improve those clinical processes that underpin the patient journey across the continuum of care. Different industry models exist and have been extended for use in healthcare settings to involve, engage and educate staff with the primary focus of providing the best possible patient care, in an effective and efficient manner. What does this paper add? The clinical redesign process outlined in this paper is instructive in its use of the metaphorical team. Team philosophy, composition and functionality was built up using the vernacular of a football competition. In this way, organisational learning and capability building occurred within empowered local action teams, across the ‘season’ to effect changes at all points of the patient journey. What are the implications for practitioners? The implications for practitioners are to fully understand the breadth of issues before deciding upon focus areas for improvement. Resistance to change is inevitable and there are a number of ways to mitigate this and create a sense of purpose within the broader clinical group by structuring teams across traditional reporting lines. Collaboration is crucial in keeping lines of communication open and the use of data and patient feedback is very instructive.


Sign in / Sign up

Export Citation Format

Share Document