Temperature-Sensitive Paint Applications in the Heat Transfer Analysis of 90° Elbow Microchannel Flow with Sharp and Curved Turns

2020 ◽  
Vol 36 (4) ◽  
pp. 551-565
Author(s):  
Chih-Yung Huang ◽  
Jhih-Ren Lin ◽  
Tong-Miin Liou
Keyword(s):  
Heat Transfer ◽  
Surface Temperature ◽  
Constant Heat Flux ◽  
Heat Transfer Analysis ◽  
Temperature Sensitive ◽  
Microchannel Flow ◽  
Flux Boundary Condition ◽  
Micro Heat Exchanger ◽  
Axial Heat ◽  
Temperature Sensitive Paint

ABSTRACTThis study presents the heat transfer analysis of 90° elbow microchannel flow with sharp and curved turn designs. Experimental technique of temperature-sensitive paint was adapted in the experiment for measuring both fluid and surface temperature. The detailed information of fluid and surface temperature data were successfully acquired with a microscope system at Reynolds number varying from 50.5 to 101.1. Micro heaters were fabricated and positioned underneath the microchannel to provide the constant heat flux boundary condition. The utilization of micro heaters can prevent the axial heat conduction. The Nusselt number contours were obtained in this study with sharp and curved corners, which can provide detailed information of localized region with high and low heat transfer. The experimental approach performed in this study could be applied in the future for micro heat exchanger or heat sink design with complex microchannel systems.

scholarly journals Heat Transfer Determined by the Temperature Sensitive Paint Method

2018 ◽  
Vol 2018 (4) ◽  
pp. 45-57
Author(s):  
Łukasz Jeziorek ◽  
Krzysztof Szafran ◽  
Paweł Skalski
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Coefficient ◽  
Surface Temperature ◽  
Transfer Coefficient ◽  
Thermal Power ◽  
Test Method ◽  
Temperature Sensitive ◽  
Complex Objects ◽  
Temperature Sensitive Paint ◽  
The Heat Transfer Coefficient

Abstract The paper presents practical aspects of determining the amount of heat flow by measuring the distribution of surface temperature using the Temperature Sensitive Paint (TSP) method. The quantity measured directly with TSP is the intensity of the excited radiation, which is then converted to surface temperature. The article briefly presents three different methods for determining the heat transfer coefficient. Each of these methods is based on a separate set of assumptions and significantly influences the construction of the measuring station. The advantages of each of the presented methods are their individual properties, allowing to improve accuracy, reduce the cost of testing or the possibility of using them in tests of highly complex objects. For each method a mathematical model used to calculate the heat transfer coefficient is presented. For the steady state heat transfer test method that uses a heater of constant and known thermal power, examples of the results of our own research are presented, together with a comparison of the results with available data and a discussion of the accuracy of the results obtained.

scholarly journals Convection Heat Transfer Analysis in A Vertical Porous Tube

2020 ◽  
Vol 8 (1) ◽  
pp. 31-45
Author(s):  
Hikmat N. Abdulkareem ◽  
Kifah H. Hilal
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Convection Heat Transfer ◽  
Particle Diameter ◽  
Vertical Channel ◽  
Packed Bed ◽  
Constant Heat Flux ◽  
Heat Transfer Analysis ◽  
Constant Heat ◽  
Flux Boundary Condition

Forced convective heat transfer in a vertical channel symmetrically heated with a constant heat flux, and packed with saturated porous media, has been investigated experimentally in the present work. The channel was padded with spherical glass of three diameter (1, 3 and 10 mm) in a range 0.0416 < (particle diameter / inner channel radius) <0.416. The experimental setup, using a copper tube as a packed bed assembly with (48 mm) inside diameter and (1150 mm) heated length with a constant heat flux boundary condition. The test section was vertically oriented with water flowing against gravity and packed with glass spheres (1, 3 and 10 mm) diameter respectively. The results show that local Nusselt number increased at 34% with increasing Reynolds number at 65% while increased at 11% with increasing heat flux at 71%. Heat transfer rate increase as the particle diameter increase at the range of (1 – 3) mm but decrease with increasing particle diameter at the range (3 – 10) mm. Pressure drop through channel minimize at 97% as porosity increase at 23%.Many empirical relations, obtained experimentally.

Heat Transfer Analysis of Laminar Pulsating Flow in a Rectangular Channel Using Infrared Thermography

2021 ◽  
Author(s):  
Richard Blythman ◽  
Sajad Alimohammadi ◽  
Nicholas Jeffers ◽  
Darina B. Murray ◽  
Tim Persoons
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Analytical Solution ◽  
Local Time ◽  
Rectangular Channel ◽  
Pulsating Flow ◽  
Time Dependent ◽  
Heat Transfer Analysis ◽  
Flux Boundary Condition ◽  
Hydrodynamic Behaviour

Abstract While numerous applied studies have successfully demonstrated the feasibility of unsteady cooling solutions, a consensus has yet to be reached on the local instantaneous conditions that result in heat transfer enhancement. The current work aims to experimentally validate a recent analytical solution (on a local time-dependent basis) for the common flow condition of a fully-developed incompressible pulsating flow in a uniformly-heated vessel. The experimental setup is found to approximate the ideal constant heat flux boundary condition well, especially for the decoupled unsteady scenario where the amplitude of the most significant secondary contributions (capacitance and lateral conduction) amounts to 1.2% and 0.2% of the generated heat flux, respectively. Overall, the experimental measurements for temperature and heat flux oscillations are found to coincide well with a recent analytical solution to the energy equation by the authors. Furthermore, local time-dependent heat flux enhancements and degradations are observed to be qualitatively similar to those of wall shear stress from a previous study, suggesting that the thermal performance is indeed influenced by hydrodynamic behaviour.

On Effects of Temperature Boundary Conditions on Heat Transfer in Turbulent Low-Prandtl-Number Flows

2020 ◽  
Author(s):  
Ivan Otic
Keyword(s):  
Heat Transfer ◽  
Boundary Condition ◽  
Heat Flux ◽  
Boundary Conditions ◽  
Constant Heat Flux ◽  
Constant Heat ◽  
Flux Boundary Condition ◽  
Large Eddy ◽  
Heat Flux Boundary Condition ◽  
Effects Of Temperature

Abstract One important issue in understanding and modeling of turbulent heat transfer is the behavior of fluctuating temperature close to the wall. Common engineering computational approach assumes constant heat flux boundary condition on heated walls. In the present paper constant heat flux boundary condition was assumed and effects of temperature fluctuations are investigated using large eddy simulations (LES) approach. A series of large eddy simulations for two geometries is performed: First, forced convection in channels and second, forced convection over a backward facing step. LES simulation data is statistically analyzed and compared with results of direct numerical simulations (DNS) from the literature which apply three cases of heat flux boundary conditions: 1. ideal heat flux boundary condition, 2. non-ideal heat flux boundary condition, 3. conjugate heat transfer boundary condition. For low Prandtl number flows LES results show that, despite very good agreement for velocities and mean temperature, predictions of temperature fluctuations may have strong deficiencies if simplified boundary conditions are applied.

scholarly journals CFD-Entropy generation analysis of refrigerant-based nanofluids flow in a tube

2020 ◽  
Vol 307 ◽  
pp. 01038
Author(s):  
Mohammed Zohud ◽  
Ahmed Ouadha ◽  
Redouane Benzeguir
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Heat Transfer Coefficient ◽  
Transfer Coefficient ◽  
Entropy Generation ◽  
Constant Heat Flux ◽  
Flux Boundary Condition ◽  
Flow Heat ◽  
Heat Flux Boundary Condition ◽  
The Heat Transfer Coefficient

The present paper aims to numerically investigate the flow, heat transfer and entropy generation of some hydrocarbon based nanorefrigerants flowing in a circular tube subject to constant heat flux boundary condition. Numerical tests have been performed for 4 types of nanoparticles, namely Al2O3, CuO, SiO2, and ZnO with a diameter equal to 30 nm and a volume concentration of φ = 5%. These nanoparticles are dispersed in some hydrocarbon-based refrigerants, namely tetrafluoroethane (R134a), propane (R290), butane (R600), isobutane (R600a) and propylene (R1270). Computations have been performed for Reynolds number ranging from 600 to 2200. The numerical results in terms of the average heat transfer coefficient of pure refrigerants have been compared to values obtained using correlations from the literature. The results show that the increase of the Reynolds number increases the heat transfer coefficient and decreases the total entropy generation.

Sign in / Sign up

Export Citation Format

Share Document