The relaxation of a turbulent boundary layer in an adverse pressure gradient

1989 ◽  
Vol 200 ◽  
pp. 367-387 ◽  
Author(s):  
Andrew D. Cutler ◽  
James P. Johnston

The relaxation of a reattached turbulent boundary layer downstream of a wall fence has been investigated. The boundary layer has an adverse pressure gradient imposed upon it which is adjusted in an attempt to bring the boundary layer into equilibrium. This is done by adjusting the pressure gradient so as to bring the Clauser parameter (G) down to a value of about 11.4 and then maintain it constant. In the region from the reattachment point to 2 or 3 reattachment lengths downstream, the boundary layer recovers from the initial major effects of reattachment. Farther downstream (where G is constant) the pressure-gradient parameter changes very slowly and profiles of non-dimensionalized eddy viscosity appear self-similar. However, pressure gradient and eddy viscosity are both roughly twice as large as expected on the basis of previous studies of equilibrium turbulent boundary layers. It is not known whether equilibrium has been achieved in this downstream region. This is another illustration of the great sensitivity of boundary-layer structure to perturbations.

1951 ◽  
Vol 18 (1) ◽  
pp. 95-100
Author(s):  
Donald Ross ◽  
J. M. Robertson

Abstract As an interim solution to the problem of the turbulent boundary layer in an adverse pressure gradient, a super-position method of analysis has been developed. In this method, the velocity profile is considered to be the result of two effects: the wall shear stress and the pressure recovery. These are superimposed, yielding an expression for the velocity profiles which approximate measured distributions. The theory also leads to a more reasonable expression for the wall shear-stress coefficient.


Author(s):  
Frank J. Aldrich

A physics-based approach is employed and a new prediction tool is developed to predict the wavevector-frequency spectrum of the turbulent boundary layer wall pressure fluctuations for subsonic airfoils under the influence of adverse pressure gradients. The prediction tool uses an explicit relationship developed by D. M. Chase, which is based on a fit to zero pressure gradient data. The tool takes into account the boundary layer edge velocity distribution and geometry of the airfoil, including the blade chord and thickness. Comparison to experimental adverse pressure gradient data shows a need for an update to the modeling constants of the Chase model. To optimize the correlation between the predicted turbulent boundary layer wall pressure spectrum and the experimental data, an optimization code (iSIGHT) is employed. This optimization module is used to minimize the absolute value of the difference (in dB) between the predicted values and those measured across the analysis frequency range. An optimized set of modeling constants is derived that provides reasonable agreement with the measurements.


Sign in / Sign up

Export Citation Format

Share Document