scholarly journals Coherent structure of the convective boundary layer derived from large-eddy simulations

1989 ◽  
Vol 200 ◽  
pp. 511-562 ◽  
Author(s):  
Helmut Schmidt ◽  
Ulrich Schumann
Keyword(s):  
Boundary Layer ◽  
Boundary Condition ◽  
Large Scale ◽  
Three Dimensional ◽  
Large Eddy Simulations ◽  
Stable Layer ◽  
Convective Boundary ◽  
Velocity Fluctuations ◽  
Large Eddy ◽  
The Mean

Turbulence in the convective boundary layer (CBL) uniformly heated from below and topped by a layer of uniformly stratified fluid is investigated for zero mean horizontal flow using large-eddy simulations (LES). The Rayleigh number is effectively infinite, the Froude number of the stable layer is 0.09 and the surface roughness height relative to the height of the convective layer is varied between 10−6 and 10−2. The LES uses a finite-difference method to integrate the three-dimensional grid-volume-averaged Navier–Stokes equations for a Boussinesq fluid. Subgrid-scale (SGS) fluxes are determined from algebraically approximated second-order closure (SOC) transport equations for which all essential coefficients are determined from the inertial-range theory. The surface boundary condition uses the Monin–Obukhov relationships. A radiation boundary condition at the top of the computational domain prevents spurious reflections of gravity waves. The simulation uses 160 × 160 × 48 grid cells. In the asymptotic state, the results in terms of vertical mean profiles of turbulence statistics generally agree very well with results available from laboratory and atmospheric field experiments. We found less agreement with respect to horizontal velocity fluctuations, pressure fluctuations and dissipation rates, which previous investigations tend to overestimate. Horizontal spectra exhibit an inertial subrange. The entrainment heat flux at the top of the CBL is carried by cold updraughts and warm downdraughts in the form of wisps at scales comparable with the height of the boundary layer. Plots of instantaneous flow fields show a spoke pattern in the lower quarter of the CBL which feeds large-scale updraughts penetrating into the stable layer aloft. The spoke pattern has also been found in a few previous investigations. Small-scale plumes near the surface and remote from strong updraughts do not merge together but decay while rising through large-scale downdraughts. The structure of updraughts and downdraughts is identified by three-dimensional correlation functions and conditionally averaged fields. The mean circulation extends vertically over the whole boundary layer. We find that updraughts are composed of quasi-steady large-scale plumes together with transient rising thermals which grow in size by lateral entrainment. The skewness of the vertical velocity fluctuations is generally positive but becomes negative in the lowest mesh cells when the dissipation rate exceeds the production rate due to buoyancy near the surface, as is the case for very rough surfaces. The LES results are used to determine the root-mean-square value of the surface friction velocity and the mean temperature difference between the surface and the mixed layer as a function of the roughness height. The results corroborate a simple model of the heat transfer in the surface layer.

scholarly journals An intercomparison of Large-Eddy Simulations of the Martian daytime convective boundary layer

2016 ◽  
Author(s):  
Tanguy Bertrand ◽  
Aymeric Spiga ◽  
Scot Rafkin ◽  
Arnaud Colaitis ◽  
François Forget ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Radiative Forcing ◽  
Large Scale ◽  
Numerical Models ◽  
Horizontal Resolution ◽  
Large Eddy Simulations ◽  
Horizontal Wind ◽  
Convective Boundary ◽  
Airborne Dust ◽  
Large Eddy

Abstract. Large-Eddy Simulations (LES) for Mars resolve the Planetary Boundary Layer (PBL) turbulent dynamics by using a very fine horizontal resolution of a few tens of meters. LES modeling is becoming a more and more useful tool to prepare the robotic exploration of Mars by providing means to evaluate the intensity of convective plumes and vortices, horizontal wind gustiness, and turbulent fluctuations of temperature in the Martian PBL. In such context, and given the relative paucity of turbulence-related measurements on Mars, an intercomparison of LES models is a fruitful way to evaluate the models' predictions and to indicate possible areas of improvement. Thus, to prepare the landing of the ExoMars Schiaparelli lander (also named ExoMars Demonstrator Module, EDM), scheduled for October 2016, the results of the Laboratoire de Météorologie Dynamique (LMD) and South-West Research Institute (SwRI) LES models have been compared. The objective of this study is to determine the range of uncertainties, and dispersions, of the two numerical models' predictions, for the critical phase of the spacecraft's descent in the Martian daytime turbulent PBL. First, a strategy is defined to ensure similar radiative forcing in both the LMD and SwRI models. Then, LES are performed over a flat terrain with and without large-scale ambient horizontal wind. The LMD and SwRI Martian LES models predict similar temporal evolution of the PBL and organization in the horizontal and vertical wind fields. However, the convective motions in the daytime PBL are more vigorous by a factor 1.5–2 in SwRI results than in LMD results, independently of the presence or not of ambient horizontal wind. This discrepancy is further investigated through sensitivity studies to surface conditions, ambient wind, and airborne dust loading.

Large eddy simulations of variable property turbulent flow in horizontal and vertical channels with buoyancy and heat transfer effects

2007 ◽  
Vol 221 (4) ◽  
pp. 429-441 ◽  
Author(s):  
J S Lee ◽  
R H Pletcher
Keyword(s):  
Heat Transfer ◽  
Large Scale ◽  
Vertical Channel ◽  
Large Eddy Simulations ◽  
Mean Flow ◽  
Mean Velocity ◽  
Velocity Fluctuations ◽  
Combined Flow ◽  
Large Eddy ◽  
The Mean

Turbulent combined flow of forced and natural convection was investigated using large eddy simulations for horizontal and vertical channels with significant heat transfer. The walls were maintained at constant temperatures, one heated and the other cooled, at temperature ratios of 1.01, 1.99, and 3.00, respectively. Results showed that with increasing the Grashof number, large-scale turbulent motions emerged near the wall, resulting in significant changes in turbulent intensities for the horizontal channel flow case. Aiding and opposing flows, however, for the vertical channel, emerge near the heated and cooled walls, respectively, while the pressure gradient drives the mean flow upwards. Buoyancy effects on the mean velocity, temperature, and turbulent intensities were observed near the walls. In the aiding flow, the turbulent intensities and heat transfer were suppressed and the flow was relaminarized at large values of the Grash of number. In the opposing flow, however, turbulence was enhanced with increasing velocity fluctuations.

scholarly journals Large-Eddy Simulations of a Drizzling, Stratocumulus-Topped Marine Boundary Layer

2009 ◽  
Vol 137 (3) ◽  
pp. 1083-1110 ◽  
Author(s):  
Andrew S. Ackerman ◽  
Margreet C. vanZanten ◽  
Bjorn Stevens ◽  
Verica Savic-Jovcic ◽  
Christopher S. Bretherton ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Marine Boundary Layer ◽  
Cloud Water ◽  
Large Eddy Simulations ◽  
Cloud Base ◽  
Entrainment Rate ◽  
Liquid Water Path ◽  
Average Maximum ◽  
Large Eddy ◽  
The Mean

Abstract Cloud water sedimentation and drizzle in a stratocumulus-topped boundary layer are the focus of an intercomparison of large-eddy simulations. The context is an idealized case study of nocturnal stratocumulus under a dry inversion, with embedded pockets of heavily drizzling open cellular convection. Results from 11 groups are used. Two models resolve the size distributions of cloud particles, and the others parameterize cloud water sedimentation and drizzle. For the ensemble of simulations with drizzle and cloud water sedimentation, the mean liquid water path (LWP) is remarkably steady and consistent with the measurements, the mean entrainment rate is at the low end of the measured range, and the ensemble-average maximum vertical wind variance is roughly half that measured. On average, precipitation at the surface and at cloud base is smaller, and the rate of precipitation evaporation greater, than measured. Including drizzle in the simulations reduces convective intensity, increases boundary layer stratification, and decreases LWP for nearly all models. Including cloud water sedimentation substantially decreases entrainment, decreases convective intensity, and increases LWP for most models. In nearly all cases, LWP responds more strongly to cloud water sedimentation than to drizzle. The omission of cloud water sedimentation in simulations is strongly discouraged, regardless of whether or not precipitation is present below cloud base.

scholarly journals Comparison of Large Eddy Simulations of a convective boundary layer with wind LIDAR measurements

2012 ◽  
Vol 8 (1) ◽  
pp. 83-86 ◽  
Author(s):  
J. G. Pedersen ◽  
M. Kelly ◽  
S.-E. Gryning ◽  
R. Floors ◽  
E. Batchvarova ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Geostrophic Wind ◽  
Large Eddy Simulations ◽  
Horizontal Wind ◽  
Convective Boundary ◽  
Horizontal Wind Speed ◽  
Large Eddy ◽  
Lidar Measurements ◽  
Wind Lidar

Abstract. Vertical profiles of the horizontal wind speed and of the standard deviation of vertical wind speed from Large Eddy Simulations of a convective atmospheric boundary layer are compared to wind LIDAR measurements up to 1400 m. Fair agreement regarding both types of profiles is observed only when the simulated flow is driven by a both time- and height-dependent geostrophic wind and a time-dependent surface heat flux. This underlines the importance of mesoscale effects when the flow above the atmospheric surface layer is simulated with a computational fluid dynamics model.

Sign in / Sign up

Export Citation Format

Share Document