scholarly journals The stability of a trailing-line vortex in compressible flow

1994 ◽  
Vol 269 ◽  
pp. 323-351 ◽  
Author(s):  
Jillian A. K. Stott ◽  
Peter W. Duck
Keyword(s):  
Mach Number ◽  
Compressible Flow ◽  
Numerical Results ◽  
Line Vortex ◽  
Mach Numbers ◽  
The Stability ◽  
Vortex Axis ◽  
Very High ◽  
High Wavenumbers

We consider the inviscid stability of the Batchelor (1964) vortex in a compressible flow. The problem is tackled numerically and also asymptotically, in the limit of large (azimuthal and streamwise) wavenumbers, together with large Mach numbers. The nature of the solution passes through different regimes as the Mach number increases, relative to the wavenumbers. At very high wavenumbers and Mach numbers, the mode which is present in the incompressible case ceases to be unstable, whilst a new ‘centre mode’ forms, whose stability characteristics are determined primarily by conditions close to the vortex axis. We find that generally the flow becomes less unstable as the Mach number increases, and that the regime of instability appears generally confined to disturbances in a direction counter to the direction of the rotation of the swirl of the vortex.Throughout the paper comparison is made between our numerical results and results obtained from the various asymptotic theories.

Modeling of External Pressure Gradient Influence on the Stability of Disturbances in the Boundary Layers of Compressed Gas

2013 ◽  
Vol 8 (4) ◽  
pp. 64-75
Author(s):  
Sergey Gaponov ◽  
Natalya Terekhova
Keyword(s):  
Mach Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Leading Edge ◽  
External Pressure ◽  
Transition To Turbulence ◽  
Compressed Gas ◽  
High Mach ◽  
The Stability ◽  
Very High

This work continues the research on modeling of passive methods of management of flow regimes in the boundary layers of compressed gas. Authors consider the influence of pressure gradient on the evolution of perturbations of different nature. For low Mach number M = 2 increase in pressure contributes to an earlier transition of laminar to turbulent flow, and, on the contrary, drop in the pressure leads to a prolongation of the transition to turbulence. For high Mach number M = 5.35 found that the acoustic disturbances exhibit a very high dependence on the sign and magnitude of the external gradient, with a favorable gradient of the critical Reynolds number becomes smaller than the vortex disturbances, and at worst – boundary layer is destabilized directly on the leading edge

Some Problems of the Stability and Control of Large Aircraft

1948 ◽  
Vol 52 (455) ◽  
pp. 723-734 ◽  
Author(s):  
D. J. Lyons
Keyword(s):  
Slow Speed ◽  
The Troubles ◽  
Stability And Control ◽  
Large Size ◽  
Mach Numbers ◽  
High Mach ◽  
The Stability ◽  
And Control ◽  
Very High ◽  
Large Aircraft

In the Realm of stability and control, we are at present travelling headlong into a region of new problems. Besides tidying up the outstanding items on the types of aircraft we are used to seeing flying about to-day, a not inconsiderable task when one considers the troubles we encounter when we undertake the design of a new so-called “conventional” aeroplane, we have to tackle two major lines of research and development. First, the peculiar problems associated with the stability and control of aircraft of large size, both military and civil, into which difficulties associated with high Mach numbers intrude themselves but little; and secondly, the even more extensive problems associated with the stability and control of aircraft, both large and small, which are to fly at very high Mach numbers, not only at their design cruising and diving speeds, but also in the extremely important slow speed conditions. Mr. M. B. Morgan of the R.A.E. has dealt with some aspects of the second series of problems, so I propose to concentrate on some of the problems involved in the first series, that is those primarily associated with the increase of aircraft size.

scholarly journals The effects of viscosity on the stability of a trailing‐line vortex in compressible flow

1995 ◽  
Vol 7 (9) ◽  
pp. 2265-2270 ◽  
Author(s):  
Jillian A. K. Stott ◽  
Peter W. Duck
Keyword(s):  
Compressible Flow ◽  
Line Vortex ◽  
The Stability

On the instabilities of supersonic mixing layers: a high-Mach-number asymptotic theory

1990 ◽  
Vol 216 ◽  
pp. 585-611 ◽  
Author(s):  
Thomas F. Balsa ◽  
M. E. Goldstein
Keyword(s):  
Mach Number ◽  
Asymptotic Theory ◽  
Multilayered Structure ◽  
Numerical Results ◽  
Mixing Layers ◽  
Temperature Ratio ◽  
Wide Range ◽  
Mach Numbers ◽  
High Mach ◽  
Similarity Law

The stability of a family of tanh mixing layers is studied at large Mach numbers using perturbation methods. It is found that the eigenfunction develops a multilayered structure, and the eigenvalue is obtained by solving a simplified version of the Rayleigh equation (with homogeneous boundary conditions) in one of these layers which lies in either of the external streams. Our analysis leads to a simple hypersonic similarity law which explains how spatial and temporal phase speeds and growth rates scale with Mach number and temperature ratio. Comparisons are made with numerical results, and it is found that this similarity law provides a good qualitative guide for the behaviour of the instability at high Mach numbers.In addition to this asymptotic theory, some fully numerical results are also presented (with no limitation on the Mach number) in order to explain the origin of the hypersonic modes (through mode splitting) and to discuss the role of oblique modes over a very wide range of Mach number and temperature ratio.

scholarly journals The use of shock-detecting sensor to improve the stability of Lattice Boltzmann Model for high Mach number flows

2015 ◽  
Vol 26 (01) ◽  
pp. 1550006 ◽  
Author(s):  
Mohsen Ghadyani ◽  
Vahid Esfahanian ◽  
Mohammad Taeibi-Rahni
Keyword(s):  
Mach Number ◽  
Lattice Boltzmann ◽  
Compressible Flows ◽  
Recent Decade ◽  
Numerical Results ◽  
Lattice Boltzmann Model ◽  
Rarefaction Waves ◽  
High Mach ◽  
The Stability ◽  
Improved Model

Attempts to simulate compressible flows with moderate Mach number to relatively high ones using Lattice Boltzmann Method (LBM) have been made by numerous researchers in the recent decade. The stability of the LBM is a challenging problem in the simulation of compressible flows with different types of embedded discontinuities. The present study proposes an approach for simulation of inviscid flows by a compressible LB model in order to enhance the robustness using a combination of Essentially NonOscillatory (ENO) scheme and Shock-Detecting Sensor (SDS) procedure. A sensor is introduced with adjustable parameters which is active near the discontinuities and affects less on smooth regions. The validity of the improved model to capture shocks and to resolve contact discontinuity and rarefaction waves in the well-known benchmarks such as, Riemann problem, and shock reflection is investigated. In addition, the problem of supersonic flow in a channel with ramp is simulated using a skewed rectangular grid generated by an algebraic grid generation method. The numerical results are compared with analytical ones and those obtained by solving the original model. The numerical results show that the presented scheme is capable of generating more robust solutions in the simulation of compressible flows and is almost free of oscillations for high Mach numbers. Good agreements are obtained for all problems.

Design and Analysis of a High Pitch to Chord Ratio Cascade Representative of Ducted Propfans

1991 ◽  
Author(s):  
A. Weber ◽  
W. Steinert ◽  
H. Starken
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
High Efficiency ◽  
Pressure Ratio ◽  
Flow Analysis ◽  
High Pitch ◽  
Integral Boundary ◽  
Pressure Loss Coefficient ◽  
Distribution Boundary ◽  
Very High

Efforts to reduce the specific fuel consumption of a modern aero engine focus in particular on increasing the by-pass ratio beyond the current level of around 5. One concept is the counterrotating shrouded propfan operating at low overall pressure ratio and having only very few fan blades of extremely high pitch/chord ratios. The relative inlet Mach numbers cover a range from 0.7 at the hub to 1.1 at the tip section of the first rotor. A propfan cascade was designed by taking into account two characteristic features of a propfan blade-blade section: • a very high pitch/chord ratio of s/c = 2.25 • an inlet Mach number of M1 = 0.90 which leads to transonic flow conditions inside the blade passage In the design process a profile generator and a quasi-3D Euler solver were used iteratively to optimize the profile Mach number distribution. Boundary layer behavior was checked with an integral boundary layer code. The cascade design was verified experimentally in the transonic cascade wind tunnel of DLR at Cologne. The extensive experimental results confirm the design goal of roughly 5 degree flow turning. A total pressure loss coefficient of less than 1.5% was measured at design conditions. This validates the very high efficiency level the propfan concept is calling for. A 2D Navier-Stokes flow analysis code yields good results in comparison to the experimental ones.

Heat Transfer in Rotating Serpentine Coolant Passage With Ribbed Walls at Low Mach Numbers

2015 ◽  
Vol 7 (1) ◽  
Author(s):  
Shang-Feng Yang ◽  
Je-Chin Han ◽  
Salam Azad ◽  
Ching-Pang Lee
Keyword(s):  
Heat Transfer ◽  
Mach Number ◽  
Reynolds Numbers ◽  
Working Fluid ◽  
Transfer Coefficients ◽  
Low Mach Number ◽  
Heat Transfer Coefficients ◽  
Rotation Numbers ◽  
Wide Range ◽  
Mach Numbers

This paper experimentally investigates the effect of rotation on heat transfer in typical turbine blade serpentine coolant passage with ribbed walls at low Mach numbers. To achieve the low Mach number (around 0.01) condition, pressurized Freon R-134a vapor is utilized as the working fluid. The flow in the first passage is radial outward, after the 180 deg tip turn the flow is radial inward to the second passage, and after the 180 deg hub turn the flow is radial outward to the third passage. The effects of rotation on the heat transfer coefficients were investigated at rotation numbers up to 0.6 and Reynolds numbers from 30,000 to 70,000. Heat transfer coefficients were measured using the thermocouples-copper-plate-heater regional average method. Heat transfer results are obtained over a wide range of Reynolds numbers and rotation numbers. An increase in heat transfer rates due to rotation is observed in radially outward passes; a reduction in heat transfer rate is observed in the radially inward pass. Regional heat transfer coefficients are correlated with Reynolds numbers for nonrotation and with rotation numbers for rotating condition, respectively. The results can be useful for understanding real rotor blade coolant passage heat transfer under low Mach number, medium–high Reynolds number, and high rotation number conditions.

Effect of Mach number on the acoustic field of 2:1 elliptic-slot jet

2001 ◽  
Vol 105 (1043) ◽  
pp. 9-16 ◽  
Author(s):  
S. B. Verma ◽  
E. Rathakrishnan
Keyword(s):  
Mach Number ◽  
Fundamental Frequency ◽  
Acoustic Field ◽  
Major Axis ◽  
Shock Structure ◽  
Minor Axis ◽  
Noise Levels ◽  
Underexpanded Jets ◽  
Barrel Shock ◽  
Mach Numbers

Abstract The shock-structure and the related acoustic field of underexpanded jets undergoes significant changes as the Mach number Mj is increased. The present investigation is carried out to study the effect of Mach number on an underexpanded 2:1 elliptic-slot jet. Experimental data are presented for fully expanded Mach numbers ranging from 1.3 to 2.0. It is observed that the ‘cross-over’ point at the end of the first cell at low Mach numbers gets replaced by a normal shock at a highly underexpanded condition resulting in the formation of a ‘barrel’ shock along the minor-axis side with a ‘bulb’ shock formed along the major-axis side. The above change in shock structure is accompanied by a related change in the acoustic field. The amplitude of fundamental frequency along the minor-axis side grows with Mj but falls beyond Mj = 1.75. Along the major-axis side, however, the fundamental frequency does not exist at low Mach numbers. It appears at Mj = 1.75 but then falls at Mj = 2.0. The related azimuthal directivity of overall noise levels (OASPL) shows significant changes with Mj.

Sign in / Sign up

Export Citation Format

Share Document