Models of laser-plasma ablation

1986 ◽  
Vol 35 (1) ◽  
pp. 43-74 ◽  
Author(s):  
G. J. Pert

Dimensional analysis is used to predict the functional relationships amongst the characteristic variables of the ablation of a cold dense fluid by an imposed external heat source. From these relations, self-similar limiting forms are identified and evaluated. Numerical simulation is used to investigate the interpolation between these limits. Self-similar forms generalizing well-known existing solutions of relevance to laser-plasma are demonstrated and include a general proof of Nemchinov's hypothesis for the heating of small targets of limited mass.

2019 ◽  
Vol 880 ◽  
pp. 239-283 ◽  
Author(s):  
Christoph Wenzel ◽  
Tobias Gibis ◽  
Markus Kloker ◽  
Ulrich Rist

A direct numerical simulation study of self-similar compressible flat-plate turbulent boundary layers (TBLs) with pressure gradients (PGs) has been performed for inflow Mach numbers of 0.5 and 2.0. All cases are computed with smooth PGs for both favourable and adverse PG distributions (FPG, APG) and thus are akin to experiments using a reflected-wave set-up. The equilibrium character allows for a systematic comparison between sub- and supersonic cases, enabling the isolation of pure PG effects from Mach-number effects and thus an investigation of the validity of common compressibility transformations for compressible PG TBLs. It turned out that the kinematic Rotta–Clauser parameter $\unicode[STIX]{x1D6FD}_{K}$ calculated using the incompressible form of the boundary-layer displacement thickness as length scale is the appropriate similarity parameter to compare both sub- and supersonic cases. Whereas the subsonic APG cases show trends known from incompressible flow, the interpretation of the supersonic PG cases is intricate. Both sub- and supersonic regions exist in the boundary layer, which counteract in their spatial evolution. The boundary-layer thickness $\unicode[STIX]{x1D6FF}_{99}$ and the skin-friction coefficient $c_{f}$, for instance, are therefore in a comparable range for all compressible APG cases. The evaluation of local non-dimensionalized total and turbulent shear stresses shows an almost identical behaviour for both sub- and supersonic cases characterized by similar $\unicode[STIX]{x1D6FD}_{K}$, which indicates the (approximate) validity of Morkovin’s scaling/hypothesis also for compressible PG TBLs. Likewise, the local non-dimensionalized distributions of the mean-flow pressure and the pressure fluctuations are virtually invariant to the local Mach number for same $\unicode[STIX]{x1D6FD}_{K}$-cases. In the inner layer, the van Driest transformation collapses compressible mean-flow data of the streamwise velocity component well into their nearly incompressible counterparts with the same $\unicode[STIX]{x1D6FD}_{K}$. However, noticeable differences can be observed in the wake region of the velocity profiles, depending on the strength of the PG. For both sub- and supersonic cases the recovery factor was found to be significantly decreased by APGs and increased by FPGs, but also to remain virtually constant in regions of approximated equilibrium.


1996 ◽  
Author(s):  
Andrei Yu. Semenov ◽  
Sergei F. Goncharov

2020 ◽  
Vol 991 ◽  
pp. 24-29
Author(s):  
Dhimas Wicaksono ◽  
Xiao Meng Zhu ◽  
Mohammad Sukri Mustapa ◽  
Sulis Yulianto ◽  
Ahmad Yunus Nasution ◽  
...  

In this work, a ternary system prepared by Ni-Al-Ti mixed powder was synthesized using self-propagation high-temperature synthesis (SHS) process. The weight of the reactant was varied using 3%, 10%, 20% and 30% of the Ti content. The mixtures were compressed in a steel die to form compacted pellets, and subsequently ignited using an external heat source to initiate the combustion process. The synthesized products were characterized using SEM, EDS, and XRD, whereas the mechanical property of the product was measured using a Vickers microhardness test. The identification of the formed phase indicates that Ni-Al, Ti-Al and Ti-Ni systems were formed during the reaction. An increase of Ti content from 3% to 10% improves the density of the synthesized product. Further increase of Ti content to 20% results in the generation of cracks. The addition of Ti with 30% leads to the formation of a porous product. The heat released by the SHS process due to the formation of several intermetallic phases was responsible for the formation of defect products. The highest hardness of the product was achieved in the product prepared by 20% Ti content. However, the higher Ti content than 20% results in hardness reduction. This work shows that the content of 10% of Ti produced a dense and hard product.


2012 ◽  
Vol 710 ◽  
pp. 482-504 ◽  
Author(s):  
Elad Rind ◽  
Ian P. Castro

AbstractDirect numerical simulation has been used to study the effects of external turbulence on axisymmetric wakes. In the absence of such turbulence, the time-developing axially homogeneous wake is found to have the self-similar properties expected whereas, in the absence of the wake, the turbulence fields had properties similar to Saffman-type turbulence. Merging of the two flows was undertaken for three different levels of external turbulence (relative to the wake strength) and it is shown that the presence of the external turbulence enhances the decay rate of the wake, with the new decay rates increasing with the relative strength of the initial external turbulence. The external turbulence is found to destroy any possibility of self-similarity within the developing wake, causing a significant transformation in the latter as it gradually evolves towards the former.


Sign in / Sign up

Export Citation Format

Share Document