scholarly journals Function-Theoretic Metrics and Boundary Behaviour of Functions Meromorphic or Holomorphic in the Unit Disk

1972 ◽  
Vol 45 ◽  
pp. 109-117
Author(s):  
Shinji Yamashita
Keyword(s):  
Unit Disk ◽  
Boundary Behaviour ◽  
Arc Length

The metrics to which the title of the present paper refers are expressed in the form of elements of arc length as follows:

scholarly journals Boundary behaviour of holomorphic functions on the cardioid domain with some applications

2019 ◽  
Vol 38 (7) ◽  
pp. 203-218
Author(s):  
Shatha Sami Alhily ◽  
_ Deepmala
Keyword(s):  
General Solution ◽  
Holomorphic Function ◽  
Unit Disk ◽  
Laplace Equation ◽  
Holomorphic Functions ◽  
Research Paper ◽  
Boundary Behaviour ◽  
Polar Function

The objective of this research paper is to show how the Bennan'sconjecture  become a useful tool  to construct a holomorphic function on the cardioid domain, and on the boundary of unit disk. Moreover , we have addressed some applications on the existence of cusp on the boundary of arising from integrability of conformalmaps through one of the polar function in the general solution of Laplace equation.

scholarly journals The boundary behaviour of Hadamard lacunary series

1983 ◽  
Vol 89 ◽  
pp. 65-76 ◽  
Author(s):  
Takafumi Murai
Keyword(s):  
Power Series ◽  
Unit Disk ◽  
Lacunary Series ◽  
Open Unit ◽  
Open Unit Disk ◽  
Boundary Behaviour ◽  
Convergent Power Series

A convergent power series f(z) in the open unit disk D is called Hadamard lacunary if it is expressed as follows:

The visual perception of arc length on a real surface

1997 ◽  
Author(s):  
J. Farley Norman ◽  
Joseph S. Lappin ◽  
Hideko F. Norman
Keyword(s):  
Visual Perception ◽  
Real Surface ◽  
Arc Length

Dimensions of plane and solid angles and their units in the International System of Units (SI)

2020 ◽  
pp. 26-32
Author(s):  
M. I. Kalinin ◽  
L. K. Isaev ◽  
F. V. Bulygin
Keyword(s):  
Solid Angle ◽  
International System ◽  
International Committee ◽  
Plane Angle ◽  
Arc Length ◽  
Weights And Measures ◽  
International System Of Units ◽  
System Of Units ◽  
In Series ◽  
Solid Angles

The situation that has developed in the International System of Units (SI) as a result of adopting the recommendation of the International Committee of Weights and Measures (CIPM) in 1980, which proposed to consider plane and solid angles as dimensionless derived quantities, is analyzed. It is shown that the basis for such a solution was a misunderstanding of the mathematical formula relating the arc length of a circle with its radius and corresponding central angle, as well as of the expansions of trigonometric functions in series. From the analysis presented in the article, it follows that a plane angle does not depend on any of the SI quantities and should be assigned to the base quantities, and its unit, the radian, should be added to the base SI units. A solid angle, in this case, turns out to be a derived quantity of a plane angle. Its unit, the steradian, is a coherent derived unit equal to the square radian.

The Yukawa Potential Function and Reciprocal Univalent Function

2013 ◽  
Vol 3 (2) ◽  
pp. 197-202
Author(s):  
Amir Pishkoo ◽  
Maslina Darus
Keyword(s):  
Mathematical Model ◽  
Unit Disk ◽  
Potential Function ◽  
Univalent Function ◽  
Open Problem ◽  
Yukawa Potential ◽  
Reciprocal Theorem ◽  
Problem Statement ◽  
Fundamental Forces

This paper presents a mathematical model that provides analytic connection between four fundamental forces (interactions), by using modified reciprocal theorem,derived in the paper, as a convenient template. The essential premise of this work is to demonstrate that if we obtain with a form of the Yukawa potential function [as a meromorphic univalent function], we may eventually obtain the Coloumb Potential as a univalent function outside of the unit disk. Finally, we introduce the new problem statement about assigning Meijer's G-functions to Yukawa and Coloumb potentials as an open problem.

On a Subclass of Univalent Harmonic Mappings Convex in the Imaginary Direction

2020 ◽  
pp. 445-454
Author(s):  
Deepali Khurana ◽  
Sushma Gupta ◽  
Sukhjit Singh
Keyword(s):  
Present Article ◽  
Unit Disk ◽  
Imaginary Axis ◽  
Harmonic Mappings ◽  
Open Unit ◽  
Open Unit Disk ◽  
Distortion Bounds ◽  
Univalent Harmonic Mappings

In the present article, we consider a class of univalent harmonic mappings, $\mathcal{C}_{T} = \left\{ T_{c}[f] =\frac{f+czf'}{1+c}+\overline{\frac{f-czf'}{1+c}}; \; c>0\;\right\}$ and $f$ is convex univalent in $\mathbb{D}$, whose functions map the open unit disk $\mathbb{D}$ onto a domain convex in the direction of the imaginary axis. We estimate coefficient, growth and distortion bounds for the functions of the same class.

Choice of Noncircular Gears Hobbing Linkage Methods

2019 ◽  
Vol 13 (1) ◽  
pp. 69-74
Author(s):  
Wang Yazhou ◽  
Xiao Junfeng ◽  
Liu Yongping ◽  
An Jianmin
Keyword(s):  
Machine Tools ◽  
High Density ◽  
Arc Length ◽  
Linkage Methods ◽  
High Uniformity ◽  
Linkage Method ◽  
Noncircular Gears

Background: Various relevant patents and papers which have reported noncircular gears synthesize the advantages of circular gears and cam mechanisms, and are widely used in many types of mechanical instruments. Hobbing is a better method for fabricating noncircular gears. There are 4 linkagemethods to hob noncircular gears. However, which linkage method should be chosen practically has not yet been reported. Objective: The goal of this work is to choose the best linkage method for hobbing noncircular gears. Method: Firstly, the hobbing models of noncircular gears was deduced. Then, based on the model, hobbing linkage methods of noncircular gears were obtained. Thirdly, under different hobbing linkage methods, their aspects (developing regularity of hobbing cutter trace, arc length of program blocks and motion axes of machine tools) were compared. Results: Finally, with the best characteristics of a high density of shaping cutter trace, high uniformity of arc length of program blocks and ease of control, the equal arc-length of gear billet (EALGB) is obtained. It has been proven that EALGB is an excellent linkage method to hob noncircular gears. Conclusion: It has been proven that EALGB is an excellent linkage method to hob noncircular gears.

scholarly journals Affine Subspaces of Curvature Functions from Closed Planar Curves

2021 ◽  
Vol 76 (2) ◽  
Author(s):  
Leonardo Alese
Keyword(s):  
Arc Length ◽  
Planar Curves ◽  
Affine Subspaces ◽  
Planar Curve ◽  
Real Functions ◽  
Discrete Counterpart ◽  
Equivalent Conditions

AbstractGiven a pair of real functions (k, f), we study the conditions they must satisfy for $$k+\lambda f$$ k + λ f to be the curvature in the arc-length of a closed planar curve for all real $$\lambda $$ λ . Several equivalent conditions are pointed out, certain periodic behaviours are shown as essential and a family of such pairs is explicitely constructed. The discrete counterpart of the problem is also studied.

Sign in / Sign up

Export Citation Format

Share Document