scholarly journals Towards ultra-intense ultra-short ion beams driven by a multi-PW laser

2019 ◽  
Vol 37 (03) ◽  
pp. 288-300 ◽  
Author(s):  
J. Badziak ◽  
J. Domański

AbstractThe multi-petawatt (PW) lasers currently being built in Europe as part of the Extreme Light Infrastructure (ELI) project will be capable of generating femtosecond light pulses of ultra-relativistic intensities (~1023–1024 W/cm2) that have been unattainable so far. Such laser pulses can be used for the production of high-energy ion beams with unique features that could be applied in various fields of scientific and technological research. In this paper, the prospect of producing ultra-intense (intensity ≥1020 W/cm2) ultra-short (pico- or femtosecond) high-energy ion beams using multi-PW lasers is outlined. The results of numerical studies on the acceleration of light (carbon) ions, medium-heavy (copper) ions and super-heavy (lead) ions driven by a femtosecond laser pulse of ultra-relativistic intensity, performed with the use of a multi-dimensional (2D3 V) particle-in-cell code, are presented, and the ion acceleration mechanisms and properties of the generated ion beams are discussed. It is shown that both in the case of light ions and in the case of medium-heavy and super-heavy ions, ultra-intense femtosecond multi-GeV ion beams with a beam intensity much higher (by a factor ~102) and ion pulse durations much shorter (by a factor ~104–105) than achievable presently in conventional radio frequency-driven accelerators can be produced at laser intensities of 1023 W/cm2 predicted for the ELI lasers. Such ion beams can open the door to new areas of research in high-energy density physics, nuclear physics and inertial confinement fusion.

2002 ◽  
Vol 20 (3) ◽  
pp. 399-403 ◽  
Author(s):  
E. DEWALD ◽  
C. CONSTANTIN ◽  
S. UDREA ◽  
J. JACOBY ◽  
D.H.H. HOFFMANN ◽  
...  

By the interaction of intense (1010 particles/500 ns) relativistic (∼300 MeV/amu) heavy ion beams with solid targets, large volumes (several cubic millimeters) of strongly coupled plasmas are produced at solid-state densities and temperatures of up to 1 eV, with relevance for equation-of-state (EOS) studies of matter at high energy density and heavy ion-beam-driven inertial confinement fusion (ICF). The time and space profile of the ion beams, focused by the plasma lens to diameters of a minimum of 0.5 mm in order to obtain specific energy depositions of up to about 4 kJ/g, were measured to calculate the energy deposition in the target. In the present work, the plasmas created by ion beam interaction with cryogenic gas crystals and metallic targets are studied, among other methods, by backlighting shadowgraphy and electrical conductivity measurements. The experiments are coupled with two-dimensional hydrodynamic simulations.


2021 ◽  
Author(s):  
Robert Sprenkle ◽  
Luciano Silvestri ◽  
M. S. Murillo ◽  
Scott Bergeson

Abstract New facilities such as the National Ignition Facility and the Linac Coherent Light Source have pushed the frontiers of high energy-density matter. These facilities offer unprecedented opportunities for exploring extreme states of matter, ranging from cryogenic solid-state systems to hot, dense plasmas, with applications to inertial-confinement fusion and astrophysics. However, significant gaps in our understanding of material properties in these rapidly evolving systems still persist. In particular, non-equilibrium transport properties of strongly-coupled Coulomb systems remain an open question. Here, we study ion-ion temperature relaxation in a binary mixture, exploiting a recently-developed dual-species ultracold neutral plasma. We compare measured relaxation rates with atomistic simulations and a range of popular theories. Our work validates the assumptions and capabilities of the simulations and invalidates theoretical models in this regime. This work illustrates an approach for precision determinations of detailed material properties in Coulomb mixtures across a wide range of conditions.


2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Jieru Ren ◽  
Zhigang Deng ◽  
Wei Qi ◽  
Benzheng Chen ◽  
Bubo Ma ◽  
...  

Abstract Intense particle beams generated from the interaction of ultrahigh intensity lasers with sample foils provide options in radiography, high-yield neutron sources, high-energy-density-matter generation, and ion fast ignition. An accurate understanding of beam transportation behavior in dense matter is crucial for all these applications. Here we report the experimental evidence on one order of magnitude enhancement of intense laser-accelerated proton beam stopping in dense ionized matter, in comparison with the current-widely used models describing individual ion stopping in matter. Supported by particle-in-cell (PIC) simulations, we attribute the enhancement to the strong decelerating electric field approaching 1 GV/m that can be created by the beam-driven return current. This collective effect plays the dominant role in the stopping of laser-accelerated intense proton beams in dense ionized matter. This finding is essential for the optimum design of ion driven fast ignition and inertial confinement fusion.


1993 ◽  
Vol 5 (9) ◽  
pp. 3328-3336 ◽  
Author(s):  
C. J. Keane ◽  
B. A. Hammel ◽  
D. R. Kania ◽  
J. D. Kilkenny ◽  
R. W. Lee ◽  
...  

2000 ◽  
Vol 18 (2) ◽  
pp. 213-218 ◽  
Author(s):  
M. DUNNE ◽  
J. EDWARDS ◽  
P. GRAHAM ◽  
A. EVANS ◽  
S. ROTHMAN ◽  
...  

The achievement of ignition from an Inertial Confinement Fusion capsule will require a detailed understanding of a wide range of high energy density phenomena. This paper presents some recent work aimed at improving our knowledge of the strength and equation of state characteristics of low-Z materials, and outlines data which will provide quantitative benchmarks against which our predictive radiation hydrodynamics capabilities can be tested. Improvements to our understanding in these areas are required if reproducible and predictable fusion energy production is to be achieved on the next generation of laser facilities.In particular, the HELEN laser at AWE has been used to create a thermal X-ray source with 140 eV peak radiation temperature and 3% instantaneous flux uniformity to allow measurements of the Equation of State of materials at pressures up to 20 Mbar to an accuracy of <±2% in shock velocity. The same laser has been used to investigate the onset of spallation upon the release of a strong shock at a metal-vacuum boundary, with dynamic radiography used to image the spalled material in flight for the first time. Finally, a range of experiments have been performed to generate quantitative radiation hydrodynamics data on the evolution of gross target defects, driven in both planar and imploding geometry. X-ray radiography was used to record the evolving target deformation in a system where the X-ray drive and unperturbed target response were sufficiently characterized to permit meaningful analysis. The results have been compared to preshot predictions made using a wide variety of fluid codes, highlighting substantial differences between the various approaches, and indicating significant discrepancies with the experimental reality. The techniques developed to allow quantitative comparisons are allowing the causes of the discrepancies to be identified, and are guiding the development of new simulation techniques.


2016 ◽  
Vol 34 (2) ◽  
pp. 338-342 ◽  
Author(s):  
Y. Zhao ◽  
Z. Zhang ◽  
W. Gai ◽  
Y. Du ◽  
S. Cao ◽  
...  

AbstractWe present a scheme of electron beam radiography to dynamically diagnose the high energy density (HED) matter in three orthogonal directions simultaneously based on electron Linear Accelerator. The dynamic target information such as, its profile and density could be obtained through imaging the scattered electron beam passing through the target. Using an electron bunch train with flexible time structure, a very high temporal evolution could be achieved. In this proposed scheme, it is possible to obtain 1010 frames/second in one experimental event, and the temporal resolution can go up to 1 ps, spatial resolution to 1 µm. Successful demonstration of this concept will have a major impact for both future inertial confinement fusion science and HED physics research.


2019 ◽  
Vol 10 (1) ◽  
Author(s):  
T. Gong ◽  
H. Habara ◽  
K. Sumioka ◽  
M. Yoshimoto ◽  
Y. Hayashi ◽  
...  

AbstractFast ignition (FI) is a promising approach for high-energy-gain inertial confinement fusion in the laboratory. To achieve ignition, the energy of a short-pulse laser is required to be delivered efficiently to the pre-compressed fuel core via a high-energy electron beam. Therefore, understanding the transport and energy deposition of this electron beam inside the pre-compressed core is the key for FI. Here we report on the direct observation of the electron beam transport and deposition in a compressed core through the stimulated Cu Kα emission in the super-penetration scheme. Simulations reproducing the experimental measurements indicate that, at the time of peak compression, about 1% of the short-pulse energy is coupled to a relatively low-density core with a radius of 70 μm. Analysis with the support of 2D particle-in-cell simulations uncovers the key factors improving this coupling efficiency. Our findings are of critical importance for optimizing FI experiments in a super-penetration scheme.


Sign in / Sign up

Export Citation Format

Share Document