Scanning electron microscopy of flowering apices

Author(s):  
Kit W. Lee

Critical point drying (CPD) is widely used for the preparation of delicate shoot apices for scanning electron microscopy (SEM). In order to prevent charge accumulation on the dehydrated specimen, it is necessary to coat the surface with metal by vacuum evaporation or sputtering. However, cellular shrinkage is the most common irritating artifact for the shoot apices thus prepared (1). In addition, specimen charging is a common occurrence during SEM observation.Direct examination of mature plant materials (e.g., leaf, stigma, pollen, etc.) in the SEM is one of the alternative preparation methods (2,3). Nevertheless, such a simple technique has not been commonly used for floral apices. The aim of the present investigation was to explore the feasibility of using unfixed, uncoated apices for SEM.

1980 ◽  
Vol 58 (15) ◽  
pp. 1700-1703 ◽  
Author(s):  
E. C. Quattlebaum ◽  
G. R. Carner

Vapor fixation for 96 h with 1% osmium tetroxide (OsO4) and 3–4 days air drying produced distortion-free specimens of Beauveria spp. for examination with the scanning electron microscope. A combination of 4 h OsO4 vapor fixation and freeze-drying also reduced disruption satisfactorily but specimens were not as well preserved as with the first method. Preparation methods that were ineffective in preventing collapse of hydrophilic structures were Cling Free® sprayed on specimens prior to examination, freeze-drying, critical-point drying (of unfixed material), and vapor fixation with glutaraldehyde.


2012 ◽  
Vol 20 (2) ◽  
pp. 28-31 ◽  
Author(s):  
Patrick Moran ◽  
Brittany Coats

Sample preparation is a critical step in scanning electron microscopy (SEM) imaging. This is especially true for biological samples because of charge build-up and sensitivity to vacuum and electron beam damage. In terms of ultrastructure imaging, a variety of advancements in detectors and approaches have improved biological imaging such that fewer steps are required for sample preparation. However, the conventional approach incorporating osmium tetroxide fixing, ethanol dehydrating, critical-point drying, and coating still finds useful application. This paper evaluates three biological sample-preparation methodologies for imaging the ultrastructure of immature porcine retina. The three preparation methods examined are critical-point drying (CPD), hexamethyldisilazane (HMDS) dehydration, and direct imaging by environmental scanning electron microscopy (ESEM). Preparation methodologies were evaluated based on resulting image quality and reduced potential for artifacts.


Author(s):  
Linda M. Sicko ◽  
Thomas E. Jensen

The use of critical point drying is rapidly becoming a popular method of preparing biological samples for scanning electron microscopy. The procedure is rapid, and produces consistent results with a variety of samples. The preservation of surface details is much greater than that of air drying, and the procedure is less complicated than that of freeze drying. This paper will present results comparing conventional air-drying of plant specimens to critical point drying, both of fixed and unfixed material. The preservation of delicate structures which are easily damaged in processing and the use of filter paper as a vehicle for drying will be discussed.


Author(s):  
M.J.C. Hendrix ◽  
D.E. Morse

Atrial septal defects are considered the most common congenital cardiac anomaly occurring in humans. In studying the normal sequential development of the atrial septum, chick embryos of the White Leghorn strain were prepared for scanning electron microscopy and the results were then extrapolated to the human heart. One-hundred-eighty chick embryos from 2 to 21 days of age were removed from their shells and immersed in cold cacodylate-buffered aldehyde fixative . Twenty-four embryos through the first week post-hatching were perfused in vivo using cold cacodylate-buffered aldehyde fixative with procaine hydrochloride. The hearts were immediately dissected free and remained in the fixative a minimum of 2 hours. In most cases, the lateral atrial walls were removed during this period. The tissues were then dehydrated using a series of ascending grades of ethanol; final dehydration of the tissues was achieved via the critical point drying method followed by sputter-coating with goldpalladium.


Author(s):  
Toshihiko Takita ◽  
Tomonori Naguro ◽  
Toshio Kameie ◽  
Akihiro Iino ◽  
Kichizo Yamamoto

Recently with the increase in advanced age population, the osteoporosis becomes the object of public attention in the field of orthopedics. The surface topography of the bone by scanning electron microscopy (SEM) is one of the most useful means to study the bone metabolism, that is considered to make clear the mechanism of the osteoporosis. Until today many specimen preparation methods for SEM have been reported. They are roughly classified into two; the anorganic preparation and the simple preparation. The former is suitable for observing mineralization, but has the demerit that the real surface of the bone can not be observed and, moreover, the samples prepared by this method are extremely fragile especially in the case of osteoporosis. On the other hand, the latter has the merit that the real information of the bone surface can be obtained, though it is difficult to recognize the functional situation of the bone.


Author(s):  
T. Inoué ◽  
H. Koike

Low temperature scanning electron microscopy (LTSEM) is useful to avoid artifacts such as deformation and extraction, because specimens are not subjected to chemical fixation, dehydration and critical-point drying. Since Echlin et al developed a LTSEM, many techniques and instruments have been reported for observing frozen materials. However, intracellular structures such as mitochondria and endoplasmic reticulum have been unobservable by the method because of the low resolving power and inadequate specimen preparation methods. Recently, we developed a low temperature SEM that attained high resolutions. In this study, we introduce highly magnified images obtained by the newly developed LTSEM, especially intracellular structures which have been rapidly frozen without chemical fixation.[Specimen preparations] Mouse pancreas and brown adipose tissues (BAT) were used as materials. After the tissues were removed and cut into small pieces, the specimen was placed on a cryo-tip and rapidly frozen in liquid propane using a rapid freezing apparatus (Eiko Engineering Co. Ltd., Japan). After the tips were mounted on the specimen stage of a precooled cryo-holder, the surface of the specimen was manually fractured by a razor blade in liquid nitrogen. The cryo-holder was then inserted into the specimen chamber of the SEM (ISI DS-130), and specimens were observed at the accelerating voltages of 5-8 kV. At first the surface was slightly covered with frost, but intracellular structures were gradually revealed as the frost began to sublimate. Gold was then coated on the specimen surface while tilting the holder at 45-90°. The holder was connected to a liquid nitrogen reservoir by means of a copper braid to maintain low temperature.


Author(s):  
Alan Beckett

Low temperature scanning electron microscopy (LTSEM) has been evaluated with special reference to its application to the study of morphology and development in microorganisms. A number of criteria have been considered and have proved valuable in assessing the standard of results achieved. To further aid our understanding of these results, it has been necessary to compare those obtained by LTSEM with those from more conventional preparatory procedures such as 1) chemical fixation, dehydration and critical point-drying; 2) freeze-drying with or without chemical vapour fixation before hand.The criteria used for assessing LTSEM for the above purposes are as follows: 1)Specimen immobilization and stabilization2)General preservation of external morphology3)General preservation of internal morphology4)Exposure to solvents5)Overall dimensional changes6)Cell surface texture7)Differential conformational changes8)Etching frozen-hydrated material9)Beam damage10)Specimen resolution11)Specimen life


1985 ◽  
Vol 40 (7-8) ◽  
pp. 539-550 ◽  
Author(s):  
Margarete Borg

Abstract The labeling of immunocomplexes for scanning electron microscopy (SEM) is a fairly new technique, and the various procedures, that have been proposed, have not yet been compared. Such comparative evaluation was performed with Candida protease as a target antigen. This secretory enzyme of the opportunistic yeast Candida albicans can be localized on the surface of fungal blastopores and mycelia, both after growth in proteinaceous medium and upon infection of murine peritoneal macrophages. The presence of the protease antigen was confirmed by immunofluorescence and by immunoperoxidase-light microscopy. The decoration of protease - anti protease complexes for SEM was attempted with colloids derived from the immunoperoxidase reaction, by the immunogold technique, and by antibodies linked to beads of synthetic polymers (polystyrene, polymethacrylate, polyacrolein). In addition, inactivated Staphylococcus aureus was used, which binds to antibodies through its protein-A. The high resolution by SEM of surface structures was matched only by the colloid based decoration techniques. All conjugates with beads suffered from inconsistent binding, which did not correspond with the distribution of the surface antigen. The comparatively best result with beads was obtained with polystyrene (Latex). Colloid based techniques in addition allow for critical point drying, which cannot be applied to synthetic beads in the usual manner.


Sign in / Sign up

Export Citation Format

Share Document