scholarly journals Vitrification of Y zeolite and its effects on HREM images

1986 ◽  
Vol 44 ◽  
pp. 774-775
Author(s):  
R. Csencsits
Keyword(s):  
Electron Microscopy ◽  
Computer Simulation ◽  
Electron Microscope ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Systematic Investigation ◽  
Y Zeolite ◽  
Y Zeolites ◽  
Transmission Electron ◽  
Resolution Electron

High resolution electron microscopy (HREM) is a valuable technique for studying catalytic zeolite systems because it gives direct information about the structure and defects present in the structure. The difficulty with doing an HREM study on zeolites is that they become amorphous under electron irradiation. This work is a systematic investigation of the damage of Y zeolites in the transmission electron microscope (TEM); the goals of this study are to determine the mechanism for electron damage and to access the effects of damage in Y zeolites on their HREM images using computer simulation.

Study of Structural Defects in CdZnTe Crystals by High Resolution Electron Microscopy

2011 ◽  
Vol 1341 ◽  
Author(s):  
A. Hossain ◽  
A. E. Bolotnikov ◽  
G. S. Camarda ◽  
Y. Cui ◽  
R. Gul ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Scanning Transmission Electron Microscope ◽  
Structural Defects ◽  
Transmission Electron ◽  
Resolution Electron ◽  
Scanning Transmission ◽  
Infrared Microscope

ABSTRACTWe investigated defects in CdZnTe crystals produced from various conditions and their impact on fabricated devices. In this study, we employed transmission and scanning transmission electron microscope (TEM and STEM), because defects at the nano-scale are not observed readily under an optical or infrared microscope, or by most other techniques. Our approach revealed several types of defects in the crystals, such as low-angle boundaries, dislocations and precipitates, which likely are major causes in degrading the electrical properties of CdZnTe devices, and eventually limiting their performance.

High Resolution Transmission Electron Microscopy of an automobile catalytic converter

1990 ◽  
Vol 48 (4) ◽  
pp. 242-243
Author(s):  
Jan-Olle Malm ◽  
Jan-Olov Bovin
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Catalytic Converter ◽  
Active Material ◽  
Image Intensifier ◽  
High Resolution Electron Microscopy ◽  
Detailed Knowledge ◽  
Transmission Electron ◽  
Resolution Electron ◽  
Atomic Surface

Understanding of catalytic processes requires detailed knowledge of the catalyst. As heterogeneous catalysis is a surface phenomena the understanding of the atomic surface structure of both the active material and the support material is of utmost importance. This work is a high resolution electron microscopy (HREM) study of different phases found in a used automobile catalytic converter.The high resolution micrographs were obtained with a JEM-4000EX working with a structural resolution better than 0.17 nm and equipped with a Gatan 622 TV-camera with an image intensifier. Some work (e.g. EDS-analysis and diffraction) was done with a JEM-2000FX equipped with a Link AN10000 EDX spectrometer. The catalytic converter in this study has been used under normal driving conditions for several years and has also been poisoned by using leaded fuel. To prepare the sample, parts of the monolith were crushed, dispersed in methanol and a drop of the dispersion was placed on the holey carbon grid.

Structure of InAs Quantum Dots in Si Matrix Investigated by High Resolution Electron Microscopy

1999 ◽  
Vol 571 ◽  
Author(s):  
N. D. Zakharov ◽  
P. Werner ◽  
V. M. Ustinov ◽  
A.R. Kovsh ◽  
G. E. Cirlin ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Critical Thickness ◽  
High Resolution Electron Microscopy ◽  
Geometrical Parameters ◽  
Inas Quantum Dots ◽  
Temperature Growth ◽  
Transmission Electron ◽  
Resolution Electron

ABSTRACTQuantum dot structures containing 2 and 7 layers of small coherent InAs clusters embedded into a Si single crystal matrix were grown by MBE. The structure of these clusters was investigated by high resolution transmission electron microscopy. The crystallographic quality of the structure severely depends on the substrate temperature, growth sequence, and the geometrical parameters of the sample. The investigation demonstrates that Si can incorporate a limited volume of InAs in a form of small coherent clusters about 3 nm in diameter. If the deposited InAs layer exceeds a critical thickness, large dislocated InAs precipitates are formed during Si overgrowth accumulating the excess of InAs.

Silicon-Sapphire Interface: A High Resolution Electron Microscopy Study

1980 ◽  
Vol 2 ◽  
Author(s):  
Fernando A. Ponce
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Silicon Layer ◽  
High Resolution Electron Microscopy ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Resolution Limit ◽  
High Concentration ◽  
Transmission Electron ◽  
Resolution Electron

ABSTRACTThe structure of the silicon-sapphire interface of CVD silicon on a (1102) sapphire substrate has been studied in crøss section by high resolution transmission electron microscopy. Multibeam images of the interface region have been obtained where both the silicon and sapphire lattices are directly resolved. The interface is observed to be planar and abrupt to the instrument resolution limit of 3 Å. No interfacial phase is evident. Defects are inhomogeneously distributed at the interface: relatively defect-free regions are observed in the silicon layer in addition to regions with high concentration of defects.

High Resolution Electron Microscopy Observations About The Interface Structure In A Ti/TiN Multilayer Material

1991 ◽  
Vol 238 ◽  
Author(s):  
X. G. Ning ◽  
L. P. Guo ◽  
R. F. Huang ◽  
J. Gong ◽  
B. H. Yu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
Orientation Relationship ◽  
High Resolution Electron Microscopy ◽  
Interface Structure ◽  
Multilayer Material ◽  
Transition Layers ◽  
Transmission Electron ◽  
Resolution Electron ◽  
Specific Orientation

ABSTRACTThe interface structure in a Ti/TiN multilayer material has been investigated by high resolution transmission electron microscopy (HRTEM). It was shown that the α-Ti and β-TiN layers consisted of many cylindrical crystals growing along the close packed directions normal to the surface of a stainless steel. There existed specific orientation relationship at the Ti/TiN interfaces without transition layers: (111)TiN ‖ (001)Ti, [110]TiN ‖ [100]Ti. However there was no such orientation relationship at the Ti/TiN interfaces with TixN (x >1) transition layers.

Combined Use of Small Angle Neutron Scattering (Sans) and (Conventional and High Resolution) Electron Microscopy for the Characterization of Early Stages of Ordering and Phase Separation in Ni-Ti

1986 ◽  
Vol 82 ◽  
Author(s):  
A. Cerri ◽  
R. Schmelczer ◽  
P. Schwander ◽  
G. Kostorz ◽  
A.F. Wright
Keyword(s):  
Electron Microscopy ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Tem Analysis ◽  
Zone Formation ◽  
Early Stages ◽  
Transmission Electron ◽  
Resolution Electron ◽  
Combined Use ◽  
Integrated Intensity

ABSTRACTThe decomposition of Ni ∼ 11.5 at.% Ti single crystals was studied for an ageing temperature of 540°C. In this alloy, coherent ordered zones of γ′-Ni3Ti (Cu3Au structure) are formed prior to the stable n precipitates. The early stages of zone formation were investigated by in-beam SANS and transmission electron microscopy (TEM). Electron diffraction, high resolution electron microscopy, TEM analysis of dislocation arrangements in samples deformed after ageing and X-ray measurements of the integrated intensity at L12 superstructure positions show that ordered regions already appear in quenched samples, whereas compositional changes, as determined by SANS measurements, occur only upon ageing.

Comparative Studies of the Degradation of Several Zeolites Under Electron Irradiation

1987 ◽  
Vol 111 ◽  
Author(s):  
D. R. Acosta ◽  
O. Guzman ◽  
P. Del Angel ◽  
J. Dominguez
Keyword(s):  
Electron Microscopy ◽  
Electron Microscope ◽  
High Resolution ◽  
Electron Irradiation ◽  
Comparative Studies ◽  
Structural Characteristics ◽  
High Resolution Electron Microscopy ◽  
Degradation Process ◽  
Optical Parameters ◽  
Resolution Electron

High resolution electron microscopy has proven to be a powerful technique to determine structural characteristics of zeolites (l–2),symmetry variations and identification of several kind of defects.Together with ideal projected potential images, the microscopist usually finds in electron micrographs the influence of electro-optical parameters and alterations of the crystallinity of the material under electron irradiation. One of the purposes of this workis to contributetothe understanding of the degradation process of zeolites under electron irradiation in the electron microscope and in this way, discriminate when it is possible, what is reliable information recorded in the images obtained in high resolution conditions.

High Resolution Transmission Electron Microscopy of Partial States of Oxygen Order in YBa2Cu3Oz

1990 ◽  
Vol 183 ◽  
Author(s):  
C. P. Burmester ◽  
S. Quong ◽  
L. T. Wille ◽  
R. Gronsky ◽  
B. T. Ahn ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
High Resolution Electron Microscopy ◽  
Contrast Effects ◽  
Oxygen Loss ◽  
Transmission Electron ◽  
Resolution Electron ◽  
Out Of Plane ◽  
Partial States

AbstractHigh resolution electron microscopy is used to investigate the effect of electron irradiation induced oxygen loss on the states of partial order in YBa2Cu3Oz. Contrast effects visible in the [001] zone image as a result of the degree of the out-of-plane correlation of these ordered states are investigated. Using statistical simulations to aid in the analysis of the HREM images, an interpretation based on a kinetically limited evolution of the variation of long range [001] ordering is proposed.

Sign in / Sign up

Export Citation Format

Share Document