scholarly journals Optical Interferometer Microscope for Monitoring and Control of Focused Ion Beam Processes

2006 ◽  
Vol 12 (S02) ◽  
pp. 1280-1281
Author(s):  
DP Adams ◽  
MB Sinclair ◽  
TM Mayer ◽  
MJ Vasile ◽  
WC Sweatt

Extended abstract of a paper presented at Microscopy and Microanalysis 2006 in Chicago, Illinois, USA, July 30 – August 3, 2006

1993 ◽  
Vol 33 (1-2) ◽  
pp. 158-164 ◽  
Author(s):  
C.H. Chu ◽  
Y.L. Wang ◽  
Y.F. Hsieh ◽  
L.R. Harriott ◽  
H.H. Wade ◽  
...  

Author(s):  
Jack Zhou ◽  
Guoliang Yang

There are three major steps toward the fabrication of a single-digit nanohole: (1) preparing the free-standing thin film by epitaxial deposition and electrochemical etching, (2) making submicron holes (0.2–0.02 μm) by focused ion beam (FIB), and (3) reducing the hole to less than 10 nm by FIB-induced deposition. One specific aim for this paper is to model, simulate, and control the focused ion-beam machining process to fabricate holes that can reach a single-digit nanometer scale on solid-state thin films. Preliminary work has been done on the thin film (30 nm in thickness) preparation, submicron hole fabrication, and ion-beam-induced deposition, and the results are presented.


Author(s):  
E Ph Pevtsov ◽  
A V Bespalov ◽  
T A Demenkova ◽  
P A Luchnikov

2017 ◽  
Vol 114 (24) ◽  
pp. E4859-E4867 ◽  
Author(s):  
Yumei Wu ◽  
Christina Whiteus ◽  
C. Shan Xu ◽  
Kenneth J. Hayworth ◽  
Richard J. Weinberg ◽  
...  

Close appositions between the membrane of the endoplasmic reticulum (ER) and other intracellular membranes have important functions in cell physiology. These include lipid homeostasis, regulation of Ca2+ dynamics, and control of organelle biogenesis and dynamics. Although these membrane contacts have previously been observed in neurons, their distribution and abundance have not been systematically analyzed. Here, we have used focused ion beam-scanning electron microscopy to generate 3D reconstructions of intracellular organelles and their membrane appositions involving the ER (distance ≤30 nm) in different neuronal compartments. ER–plasma membrane (PM) contacts were particularly abundant in cell bodies, with large, flat ER cisternae apposed to the PM, sometimes with a notably narrow lumen (thin ER). Smaller ER–PM contacts occurred throughout dendrites, axons, and in axon terminals. ER contacts with mitochondria were abundant in all compartments, with the ER often forming a network that embraced mitochondria. Small focal contacts were also observed with tubulovesicular structures, likely to be endosomes, and with sparse multivesicular bodies and lysosomes found in our reconstructions. Our study provides an anatomical reference for interpreting information about interorganelle communication in neurons emerging from functional and biochemical studies.


2014 ◽  
Vol 1712 ◽  
Author(s):  
Prabhu Balasubramanian ◽  
Jeremy F. Graham ◽  
Robert Hull

ABSTRACTThe focused ion beam (FIB) has the necessary precision, spatial resolution and control over ion delivery for potential nano-scale doping of nanostructures such as semiconductor quantum dots (QDs). The ion current density in a FIB is 0.1-10 A/cm2, which is at least three orders of magnitude higher than that in a commercial broad beam ion implanter. Therefore an understanding of FIB implantation damage and recovery is of substantial interest. In this work we employ Raman probes of wavelengths 514 nm and 405 nm for quantifying ion implantation damage—both before and after annealing—in 30 kV Si2+, Ge2+ and Ga+ implants (fluences: 1x1012-5x1015 ions/cm2) into Si(100), for the purpose of understanding the effect of ion species on damage recovery.


Author(s):  
David C. Joy

Personal computers (PCs) are a powerful resource in the EM Laboratory, both as a means of automating the monitoring and control of microscopes, and as a tool for quantifying the interpretation of data. Not only is a PC more versatile than a piece of dedicated data logging equipment, but it is also substantially cheaper. In this tutorial the practical principles of using a PC for these types of activities will be discussed.The PC can form the basis of a system to measure, display, record and store the many parameters which characterize the operational conditions of the EM. In this mode it is operating as a data logger. The necessary first step is to find a suitable source from which to measure each of the items of interest. It is usually possible to do this without having to make permanent corrections or modifications to the EM.


2016 ◽  
Author(s):  
Giacomo Giannoccaro ◽  
Armando Ursitti ◽  
Maurizio Prosperi

Sign in / Sign up

Export Citation Format

Share Document