scholarly journals Annular Dark Field Imaging of Catalyst Nanoparticles in Single Shot Dynamic Transmission Electron Microscopy

2009 ◽  
Vol 15 (S2) ◽  
pp. 1082-1083
Author(s):  
D Masiel ◽  
B Reed ◽  
T LaGrange ◽  
ND Browning
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Single Shot ◽  
Catalyst Nanoparticles ◽  
Dark Field Imaging ◽  
Transmission Electron ◽  
Annular Dark Field ◽  
Field Imaging

Extended abstract of a paper presented at Microscopy and Microanalysis 2009 in Richmond, Virginia, USA, July 26 – July 30, 2009

scholarly journals Ru Catalyst Encapsulated into the Pores of MIL-101 MOF: Direct Visualization by TEM

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4531
Author(s):  
Maria Meledina ◽  
Geert Watson ◽  
Alexander Meledin ◽  
Pascal Van Der Voort ◽  
Joachim Mayer ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Scanning Transmission Electron Microscopy ◽  
Dark Field ◽  
Catalyst Nanoparticles ◽  
Ru Catalyst ◽  
Ru Nanoparticles ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Annular Dark Field

Ru catalyst nanoparticles were encapsulated into the pores of a Cr-based metal-organic framework (MOF)—MIL-101. The obtained material, as well as the non-loaded MIL-101, were investigated down to the atomic scale by annular dark-field scanning transmission electron microscopy using low dose conditions and fast image acquisition. The results directly show that the used wet chemistry loading approach is well-fitted for the accurate embedding of the individual catalyst nanoparticles into the cages of the MIL-101. The MIL-101 host material remains crystalline after the loading procedure, and the encapsulated Ru nanoparticles have a metallic nature. Annular dark field scanning transmission electron microscopy, combined with EDX mapping, is a perfect tool to directly characterize both the embedded nanoparticles and the loaded nanoscale MOFs. The resulting nanostructure of the material is promising because the Ru nanoparticles hosted in the MIL-101 pores are prevented from agglomeration—the stability and lifetime of the catalyst could be improved.

Techniques for Characterising Artificial Layer Structures using Transmission Electron Microscopy

1987 ◽  
Vol 103 ◽  
Author(s):  
W. M. Stobbs
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Structural Changes ◽  
Dark Field ◽  
Multilayer Structures ◽  
Dark Field Imaging ◽  
Transmission Electron ◽  
Layer Structures ◽  
Quantitative Characterisation ◽  
Field Imaging

ABSTRACTT.E.M. methods are described for the quantitative characterisation of the compositional and structural changes at interfaces and in homo- and hetero-phase multilayer structures. Many of the newer approaches described including the Fresnel and Centre Stop Dark Field Imaging Methods were developed specifically for such characterisations. The range of applications of each of the techniques is assessed as is the importance of delineating the limiting effects of inelastic and inelastic/elastic multiple scattering.

Crystalline Morphologies of Polychloroprene Thin Films as Revealed by Transmission Electron Microscopy Observation

1999 ◽  
Vol 14 (4) ◽  
pp. 1645-1652 ◽  
Author(s):  
Toshiki Shimizu ◽  
Masaki Tsuji ◽  
Shinzo Kohjiya
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Bright Field Image ◽  
Dark Field Imaging ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Lamellar Crystals ◽  
Field Imaging

Thin films of polychloroprene (CR; Neoprene-W) were made by casting its solution (2.0 wt%) in benzene onto the water surface, and some of them were stretched by a desired amount of strain (ε) in their “molten” state. The specimens thus prepared were then crystallized and examined by transmission electron microscopy. Morphological observations in bright- and dark-field imaging modes and selected-area electron diffraction analysis revealed directly that filamentous entities observed in the bright-field image are the edge-on lamellar crystals. It was, therefore, confirmed that the morphological results obtained from the thin specimens of CR without any electron staining are basically in accord with those reported so far for the OsO4-stained thin films of CR.

Origin of Threefold Periodicity in High-Resolution Transmission Electron Microscopy Images of Thin Film Cubic SiC

1999 ◽  
Vol 5 (6) ◽  
pp. 420-427 ◽  
Author(s):  
U. Kaiser ◽  
A. Chuvilin ◽  
P.D. Brown ◽  
W. Richter
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Molecular Beam ◽  
Dark Field ◽  
Dark Field Imaging ◽  
Transmission Electron ◽  
Field Imaging ◽  
Microscopy Images ◽  
Image Simulations

Abstract: High-resolution transmission electron microscopy (HRTEM) images of the [1–10] zone of cubic SiC layers grown by molecular beam epitaxy (MBE) often reveal regions of material exhibiting an unusual threefold periodicity. The same contrast was found in earlier works of Jepps and Page, who attributed this contrast in HRTEM images of polycrystalline SiC to the 9R-SiC polytype. In this report we demonstrate by HRTEM image simulations that the model of the 9R polytype and an alternative twinning model can fit qualitatively the experimental HRTEM images. However, by comparing the fast Fourier transform (FFT) patterns of the experiments and the simulations, as well as by using dark-field imaging, we show unambiguously that only the model of overlapping twinned 3C-SiC crystals fully agrees with the experiments.

Minerals and Aligned Collagen Fibrils in Tilapia Fish Scales: Structural Analysis Using Dark-Field and Energy-Filtered Transmission Electron Microscopy and Electron Tomography

2011 ◽  
Vol 17 (5) ◽  
pp. 788-798 ◽  
Author(s):  
Mitsuhiro Okuda ◽  
Nobuhiro Ogawa ◽  
Masaki Takeguchi ◽  
Ayako Hashimoto ◽  
Motohiro Tagaya ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Electron Tomography ◽  
Dark Field ◽  
Collagen Fibrils ◽  
Internal Layer ◽  
Dark Field Imaging ◽  
Transmission Electron ◽  
The Matrix ◽  
Field Imaging

AbstractThe mineralized structure of aligned collagen fibrils in a tilapia fish scale was investigated using transmission electron microscopy (TEM) techniques after a thin sample was prepared using aqueous techniques. Electron diffraction and electron energy loss spectroscopy data indicated that a mineralized internal layer consisting of aligned collagen fibrils contains hydroxyapatite crystals. Bright-field imaging, dark-field imaging, and energy-filtered TEM showed that the hydroxyapatite was mainly distributed in the hole zones of the aligned collagen fibrils structure, while needle-like materials composed of calcium compounds including hydroxyapatite existed in the mineralized internal layer. Dark-field imaging and three-dimensional observation using electron tomography revealed that hydroxyapatite and needle-like materials were mainly found in the matrix between the collagen fibrils. It was observed that hydroxyapatite and needle-like materials were preferentially distributed on the surface of the hole zones in the aligned collagen fibrils structure and in the matrix between the collagen fibrils in the mineralized internal layer of the scale.

Atomic-scale structural and compositional analyses of Ruddlesden-Popper planar faults in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics

2009 ◽  
Vol 24 (8) ◽  
pp. 2596-2604 ◽  
Author(s):  
Sašo Šturm ◽  
Makoto Shiojiri ◽  
Miran Čeh
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Atomic Scale ◽  
Transmission Electron ◽  
Initial Stage ◽  
Final Microstructure ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

The microstructure in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics is strongly affected by the formation of Ruddlesden-Popper fault–rich (RP fault) lamellae, which are coherently intergrown with the matrix of the perovskite grains. We studied the structure and chemistry of RP faults by applying quantitative high-resolution transmission electron microscopy and high-angle annular dark-field scanning transmission electron microscopy analyses. We showed that the Sr2+ and Ca2+ dopant ions form RP faults during the initial stage of sintering. The final microstructure showed preferentially grown RP fault lamellae embedded in the central part of the anisotropic perovskite grains. In contrast, the dopant Ba2+ ions preferably substituted for Sr2+ in the SrTiO3 matrix by forming a BaxSr1−xTiO3 solid solution. The surplus of Sr2+ ions was compensated structurally in the later stages of sintering by the formation of SrO-rich RP faults. The resulting microstructure showed RP fault lamellae located at the surface of equiaxed BaxSr1-xTiO3 perovskite grains.

Sign in / Sign up

Export Citation Format

Share Document