Multiband-coupled sectoral antenna using high and low dielectric constant substrates

2014 ◽  
Vol 7 (6) ◽  
pp. 721-726
Author(s):  
Abhishek Kandwal ◽  
Jai Verdhan Chauhan ◽  
Sunil Kumar Khah
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
Antenna Array ◽  
Communication Systems ◽  
Ground Plane ◽  
Mobile Systems ◽  
Low Dielectric Constant ◽  
Wireless Communication Systems ◽  
Satellite Systems ◽  
Low Dielectric

Design analysis of multiband-coupled stacked sectoral antenna array with finite ground plane using high low dielectric constant substrates is proposed in this paper for modern communication systems and applied physics. Multiband planar antennas have been extensively developed due to demands for integration of wireless communication systems. In this paper, we present the design and development of a multiband microstrip antenna array with parasitic coupling and stacking using two different substrates. The stacked designed antenna resonates at three different frequencies: 3.8, 5.4, and 10 GHz; therefore, showing a multiband property with good radiation (far-field) characteristics. A significant comparison study is also presented considering different dielectric constant substrates. The proposed antenna is an attractive solution for different wireless communication systems such as mobile systems, satellite systems, etc.

scholarly journals Broadband Dual-Polarized 2 × 2 MIMO Antenna for a 5G Wireless Communication System

Electronics ◽  
2021 ◽  
Vol 10 (17) ◽  
pp. 2141
Author(s):  
Junghoon Cha ◽  
Choon-Seong Leem ◽  
Ikhwan Kim ◽  
Hakyoung Lee ◽  
Hojun Lee
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
Ground Plane ◽  
Wireless Communication Systems ◽  
Impedance Bandwidth ◽  
Dipole Antennas ◽  
Mimo Antenna ◽  
Coefficient Corrélation ◽  
Dual Polarized ◽  
5 Ghz

In this study, we proposed an indoor broadband dual-polarized 2 × 2 MIMO (multiple-input and multiple-output) antenna having dimensions of 240 mm × 200 mm × 40 mm, for application in 5G wireless communication systems. The proposed antenna comprised two vertically polarized circular monopole antennas (CMAs), two horizontally polarized modified rectangular dipole antennas (MRDAs), and a ground plane. The distance between the two MRDAs (MRDA1 and MRDA2) was 70.5 mm and 109.5 mm in the horizontal (x-direction) and 109.5 mm vertical (y-direction) directions, respectively. Conversely, the distance between the two CMAs (CMA1 and CMA2) was 109.5 mm and 70.5 mm in the horizontal (x-direction) and vertical (y-direction) directions, respectively. While the CMAs achieved broadband characteristics owing to the optimal gap between the dielectric and the driven radiator using a parasitic element, the MRDAs achieved broadband owing to the optimal distance between the dipole antennas. The observations in this experiment confirmed that the proposed could operate in the 5G NR n46 (5.15–5.925 GHz), n47 (5.855–5.925 GHz), n77 (3.3–4.2 GHz), n78 (3.3–3.8 GHz), and the n79 (4.4–5 GHz) bands. Moreover, it exhibited a wide impedance bandwidth (dB magnitude of ) of 101% in the 2.3–7 GHz frequency range, high isolation (dB magnitude of ), low envelope coefficient correlation (ECC), gain of over 5 dB, and average radiation efficiency of 87.19%, which verified its suitability for application in sub-6 GHz 5G wireless communication systems.

scholarly journals Design and Implementation of a Corporate Fed Two Element Antennae Array using Miters

2020 ◽  
Vol 9 (4) ◽  
pp. 2777-2781
Keyword(s):  
Reflection Coefficient ◽  
Wireless Communication ◽  
Antenna Array ◽  
Communication Systems ◽  
Array Antenna ◽  
Wireless Communication Systems ◽  
Design And Implementation ◽  
Challenging Issue ◽  
Wireless Application ◽  
Element Array

In wireless communication systems, designing of antennae with required parameters is an challenging issue. So, The approach in this paper is to design a corporate fed 2 element antenna array is designed to operate at 2.4 GHz using an FR-4 substrate of height h=1.6mm. For wireless application all the antenna parameters are analysed for two element array antenna with element spacing λ, λ/2 and with miters. It is observed that bandwidth decreases by decreasing the element spacing. But by using miters for antenna with element spacing bandwidth and reflection coefficient are improved. All the antennae are fabricated and tested using VNA E5071C.

scholarly journals Flexible Wearable Composite Antennas for Global Wireless Communication Systems

Sensors ◽  
2021 ◽  
Vol 21 (18) ◽  
pp. 6083
Author(s):  
Rui Zhang ◽  
Jingwen Liu ◽  
Yangyang Wang ◽  
Zhongbao Luo ◽  
Binzhen Zhang ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
Loss Tangent ◽  
Communication Systems ◽  
Large Scale ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Wireless Body Area Network ◽  
Wireless Communication Systems ◽  
Area Network

Although wearable antennas have made great progress in recent years, how to design high-performance antennas suitable for most wireless communication systems has always been the direction of RF workers. In this paper, a new approach for the design and manufacture of a compact, low-profile, broadband, omni-directional and conformal antenna is presented, including the use of a customized flexible dielectric substrate with high permittivity and low loss tangent to realize the compact sensing antenna. Poly-di-methyl-siloxane (PDMS) is doped a certain proportion of aluminum trioxide (Al2O3) and Poly-tetra-fluoro-ethylene (PTFE) to investigate the effect of dielectric constant and loss tangent. Through a large number of comparative experiments, data on different doping ratios show that the new doped materials are flexible enough to increase dielectric constant, reduce loss tangent and significantly improve the load resistance capacity. The antenna is configured with a multisection microstrip stepped impedance resonator structure (SIR) to expand the bandwidth. The measured reflection return loss (S11) showed an operating frequency band from 0.99 to 9.41 GHz, with a band ratio of 146%. The antenna covers two important frequency bands, 1.71–2.484 GHz (personal communication system and wireless body area network (WBAN) systems) and 5.15–5.825 GHz (wireless local area network-WLAN)]. It also passed the SAR test for human safety. Therefore, the proposed antenna offers a good chance for full coverage of WLAN and large-scale development of wearable products. It also has potential applications in communication systems, wireless energy acquisition systems and other wireless systems.

Sign in / Sign up

Export Citation Format

Share Document