Design and analysis of miniaturized UWB antenna with tunable notched band

2016 ◽  
Vol 9 (3) ◽  
pp. 691-696 ◽  
Author(s):  
Priyanka Sharma ◽  
Kirti Vyas ◽  
Rajendra Prasad Yadav
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Area Network ◽  
Uwb Antenna ◽  
Ieee 802.11A ◽  
Annular Ring ◽  
Notched Band ◽  
Good Agreement

We report in this paper a novel miniaturized (12 × 18 × 1.6 mm3) microstrip fed UWB antenna with tunable notched band characteristics. The proposed antenna covers the tunable notched band for IEEE 802.11a wireless local area network operating in the frequency band of 5.15–5.825 GHz. The design of proposed antenna includes annular ring radiating patch with two T-shaped strips present inside it. The band notching is obtained by adjusting coupling between T-shaped strips placed inside the annular ring. In order to achieve larger bandwidth the ground plane of the microstrip antenna is modified. The simulated return loss of the proposed antenna has been verified in fabricated antenna experimentally, which has been in good agreement.

Planar compact dual-band monopole antenna with circular polarization for WLAN applications

2014 ◽  
Vol 8 (1) ◽  
pp. 81-87 ◽  
Author(s):  
Jui-Han Lu ◽  
Hao-Shiang Huang
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Axial Ratio ◽  
Local Area ◽  
Monopole Antenna ◽  
Dual Band ◽  
Area Network ◽  
Ieee 802.11A ◽  
Resonant Modes

A planar circularly polarized (CP) monopole antenna (MA) with dual-band operation for the IEEE 802.11a/b/g wireless local area network (WLAN) is proposed. By introducing dual strip-sleeves shorted at the ground plane, the excitation of dual-resonant modes can resemble the 2.4/5.2 GHz bands required for WLAN operations. The obtained impedance bandwidths (RL ≧10 dB) across the operating bands approach 260/988 MHz and the 3 dB axial-ratio bandwidth of about 103/710 MHz for 2.4/5.2 GHz bands, respectively. The model proposed in this study reflects more advantages in physical implementation as its overall volume is only 40 × 40 × 0.8 mm3, 22% smaller than other conventional CP MAs. The measured peak gain and radiation efficiency are about 4.1/3.3 dBic and 94/84%, respectively, and demonstrate nearly bidirectional patterns in the XZ- and YZ-planes.

Super wideband antenna with single band suppression

2015 ◽  
Vol 9 (1) ◽  
pp. 143-150 ◽  
Author(s):  
Murli Manohar ◽  
Rakhesh Singh Kshetrimayum ◽  
Anup Kumar Gogoi
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Antenna Structure ◽  
Ieee 802.11A ◽  
Feed Region

In this paper, a band-notched compact printed monopole super wideband (SWB) antenna has been designed and fabricated. The SWB antenna composed of a radiating patch with a 50 Ω triangular tapered feed line which is connected through a feed region, and a chamfered ground plane (CGP), that covers the frequency band from 0.9–100 GHz (ratio bandwidth of 111.1:1) with a reflection coefficient |S11| < −10 dB, except in the notched band of 4.7–6 GHz for Wireless local area network IEEE 802.11a and HIPERLAN/2 WLAN band. To realize the band notch characteristics a C-shape parasitic element is employed near the CGP etched with two symmetrical L-slots and placed under the radiating patch. Proposed antenna structure occupies a relatively small space (30 × 40 × 0.787 mm3) and achieved much wider impedance bandwidth as well as higher gain compared with the existing ultra wideband and SWB antennas.

scholarly journals ANALISIS TRANSFER RATE WIRELESS LOCAL AREA NETWORK DENGAN STANDAR IEEE 802.11A DAN IEEE 802.11G PADA KANAL LINE OF SIGHT

2016 ◽  
Vol 3 (1) ◽  
pp. 31-39
Author(s):  
F Ammar ◽  
Hanafi Hanafi
Keyword(s):  
Transfer Rate ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Access Point ◽  
Local Area ◽  
Line Of Sight ◽  
Area Network ◽  
Ieee 802.11A ◽  
5 Ghz

WiFi bekerja pada band 2,4 GHz dan 5 GHz. Standar WiFi yang bekerja pada frekuensi ini antara lain IEEE802.11g dan IEEE802.11a. Pada penelitian ini dilakukan pengukuran terhadap transfer rate download dan upload data dengan standar IEEE802.11g dan IEEE802.11a. Pengukuran dilakukan pada kanal Line of Sight (LOS), menggunakan dua buah laptop yang dihubungkan dengan Access Point (AP) standar IEEE802.11g dan IEEE802.11a.  Hasil penelitian diperoleh, pada standar IEEE802.11g, transfer rate download dan upload data tertinggi 2.662,54.KB/s dan 2.549,60 KB/s, dan terendah 484,50.KB/s dan 477,40 KB/s, sedangkan pada standar IEEE802.11a, transfer rate download dan upload data tertinggi 8.104,68 KB/s dan 5.744,24 KB/s, dan terendah 872,24 KB/s dan 465,38.KB/s. Pada standar IEEE802.11g, transfer rate download dan upload data pada sinyal terendah hingga di bawah 35% dan 30%, dari transfer rate download dan upload data tertinggi. Pada standar IEEE802.11a, transfer rate download dan upload data pada kualitas sinyal terendah hingga di bawah 20% dan 30%, dari transfer rate download dan upload data tertinggi. Kemampuan transfer rate download data Standar IEEE802.11a, 2–3 kali lebih baik pada kondisi kualitas sinyal tertinggi, dan tidak lebih dari 2 kali pada kondisi kualitas sinyal terendah, dibandingkan kemampuan transfer rate download data standar IEEE802.11g. Kemampuan transfer rate upload data Standar IEEE802.11a, 1,4–3 kali lebih baik pada kondisi kualitas sinyal tertinggi, dan 1-3 kali lebih baik pada kondisi kualitas sinyal terendah, dibandingkan kemampuan transfer rate upload data standar IEEE802.11g.

scholarly journals Trapezoid Shape Patch Antenna for WLAN Application

2019 ◽  
Vol 8 (9S) ◽  
pp. 512-516
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Design Parameters ◽  
Impedance Bandwidth ◽  
Area Network ◽  
S Parameter

In this paper,CPW fed Trapezoid shape patch antenna is analyzed and investigated for Wireless Local Area Network (WLAN) application. The proposed antenna is fabricated on FR4 substrate having dimensions of 19mm ×21.2mm ×1.6mm. It resonates at 5.44 GHz frequency with peak return loss of 25.8 dB. The parametric study of proposed antenna is carried out to understand the effect of different values of ground plane on the impedance bandwidth, return loss of the antenna andalso to optimize the antenna parameters. The CPW-fed is used to enhance the bandwidth and to reduce the return loss of the antenna. The importance of different design parameters like current distribution, S-parameter, gain, and radiation pattern are studied. The results of the proposed antenna are useful for WLAN Application.

A Wireless Local Area Network Channel Estimation Scheme

2013 ◽  
Vol 443 ◽  
pp. 462-467
Author(s):  
Xiang Bin Gao
Keyword(s):  
Channel Estimation ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Local Area ◽  
Area Network ◽  
Ofdm Systems ◽  
Network Systems ◽  
Ieee 802.11A ◽  
Estimation Scheme ◽  
Network Channel

In this paper, a robust channel estimation scheme is proposed for the OFDM based wireless local area network systems. The proposed channel estimation scheme has been done targeting the IEEE 802.11a standard [, but it can be extended to other packet-based OFDM systems. A robust channel estimation scheme is proposed for the OFDM-based wireless local area network systems. Performance evaluation shows that the WLAN system with the proposed channel estimation scheme is with practical system performance under harsh fading channel.

Broadband MIMO antenna for HiperLAN/2, WLAN, and WiMAX applications with high isolation

2015 ◽  
Vol 8 (2) ◽  
pp. 309-317 ◽  
Author(s):  
Raefat Jalila El Bakouchi ◽  
Marc Brunet ◽  
Tchanguiz Razban ◽  
Abdelilah Ghammaz
Keyword(s):  
High Performance ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Area Network ◽  
Mimo Antenna ◽  
High Isolation ◽  
Large Bandwidth ◽  
S Parameters

This paper presents a multiple-input and multiple-output dual-element planar inverted-F antenna (PIFA) array for broadband operation covering the HIgh PERformance radio Local Area Network/2 (5.2 GHz/5.6 GHz), Wireless Local Area Network (5.2 GHz/5.8 GHz), and the Worldwide Interoperability for Microwave Access (5.5 GHz) bands for the compact wireless communication devices. The antenna dimension is reduced substantially with a miniature ground plane. The PIFA array provides a large bandwidth (670 MHz) and a high isolation between its ports less than −26 dB. The proposed antenna has been analyzed and designed with Ansoft HFSS v.11. Then a prototype was fabricated and tested for its performance in terms of bandwidth, S-parameters, and radiation pattern. A parametric study is made to analyze the effect of different PIFA parameters on the operating frequency and the S-parameters. The diversity performances are evaluated using computer simulation technology microwave studio (CSTMWS). The broadband performance and the high isolation are achieved in both simulation and measurement.

scholarly journals Low-Profile Repeater Antenna with Parasitic Elements for On-On-Off WBAN Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-8
Author(s):  
Do-Gu Kang ◽  
Jinpil Tak ◽  
Jaehoon Choi
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Impedance Matching ◽  
Ground Plane ◽  
Local Area ◽  
Surface Radiation ◽  
Area Network ◽  
Near Surface ◽  
Ism Band ◽  
Low Profile

A low-profile repeater antenna with parasitic elements for on-on-off WBAN applications is proposed. The proposed antenna consists of a planar inverted-F antenna (PIFA), two parasitic elements, and a ground plane with a slot. Due to the slot, the impedance matching of the resonance formed by the PIFA is improved, which makes the proposed antenna operate in the 5.8 GHz industrial, scientific, and medical (ISM) band. To cover the 5.2 GHz wireless local area network (WLAN) band, a dual resonance characteristic is realized by the slot and the two parasitic elements. The first coupling between the PIFA and the slot not only makes the slot operate as a resonator, but also forms secondary coupling between the slot and the two parasitic elements. The two parasitic elements operate as an additional resonator due to secondary coupling. The antenna has the enhanced near surface radiation in the 5.8 GHz ISM band due to addition of the slot and radiation toward off-body direction in the 5.2 GHz WLAN band. In order to evaluate antenna performance considering the human body effect, the antenna characteristics on a human equivalent phantom are analyzed.

scholarly journals Design of dual band slotted reconfigurable antenna using electronic switching circuit

2021 ◽  
Vol 24 (1) ◽  
pp. 386
Author(s):  
Mustafa M. Al-Saeedi ◽  
Ahmed A. Hashim ◽  
Omer Al-Bayati ◽  
Ali Salim Rasheed ◽  
Rasool Hasan Finjan
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Dual Band ◽  
Area Network ◽  
Radiation Patterns ◽  
Directional Radiation ◽  
Constant E ◽  
Lower Complexity

This paper proposes a dual band reconfigurable microstrip slotted antenna for supporting the wireless local area network (WLAN) and worldwide interoperability for microwave access (WiMAX) applications, providing coverage where both directive and omni-directive radiations are needed. The design consists of a feedline, a ground plane with two slots and two gaps between them to provide the switching capability and a 1.6 mm thick flame retardant 4 (FR4) substrate (dielectric constant Ɛ=4.3, loss tangent δ=0.019), modeling an antenna size of 30x35x1.6 mm3. The EM simulation, which was carried out using the connected speech test (CST) studio suite 2017, generated dual wide bands of 40% (2-3 GHz) with -55 dB of S11 and 24% (5.2-6.6 GHz) higher than its predecessors with lower complexity and -60 dB of S11 in addition to the radiation pattern versatility while maintaining lower power consumption. Moreover, the antenna produced omnidirectional radiation patterns with over than 40% bandwith at 2.4 GHz and directional radiation patterns with 24% bandwith at the 5.8 GHz band. Furthermore, a comprehensive review of previously proposed designs has also been made and compared with current work.

A multi-slotted antenna for LTE/5G Sub-6 GHz wireless communication applications

2020 ◽  
pp. 1-11
Author(s):  
Rezaul Azim ◽  
AKM Moinul H. Meaze ◽  
Adnan Affandi ◽  
Md Mottahir Alam ◽  
Rumi Aktar ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Local Area ◽  
Area Network ◽  
Operating Band ◽  
Low Profile ◽  
Compact Size ◽  
Capacitive Effect ◽  
5G Communication

Abstract This paper presents a low-profile multi-slotted patch antenna for long term evolution (LTE) and fifth-generation (5G) communication applications. The studied antenna comprised of a stepped patch and a ground plane. To attain the required operating band, three slots have been inserted within the patch. The insertion of the slots enhances the capacitive effect and helps the prototype antenna to achieve an operating band ranging from 3.15 to 5.55 GHz (S11 ≤−10 dB), covering the N77/N78/N79 for sub-6 GHz 5G wireless communications and LTE bands of 22/42/43/46. The wideband antenna presented in this paper offers omnidirectional stable radiation patterns, good gains, and efficiency with a compact size which make this design an ideal contender for wireless fidelity (WiFi), wireless local area network (WLAN), LTE, and sub-6 GHz 5G communication applications.

Super wideband printed monopole antenna for ultra wideband applications

2015 ◽  
Vol 9 (1) ◽  
pp. 133-141 ◽  
Author(s):  
Sandeep Kumar Palaniswamy ◽  
Malathi Kanagasabai ◽  
Shrivastav Arun Kumar ◽  
M. Gulam Nabi Alsath ◽  
Sangeetha Velan ◽  
...  
Keyword(s):  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Wide Band ◽  
Local Area ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Area Network ◽  
Compact Size

This paper presents the design, testing, and analysis of a clover structured monopole antenna for super wideband applications. The proposed antenna has a wide impedance bandwidth (−10 dB bandwidth) from 1.9 GHz to frequency over 30 GHz. The clover shaped antenna with a compact size of 50 mm × 45 mm is designed and fabricated on an FR4 substrate with a thickness of 1.6 mm. Parametric study has been performed by varying the parameters of the clover to obtain an optimum wide band characteristics. Furthermore, the prototype introduces a method of achieving super wide bandwidth by deploying fusion of elliptical patch geometries (clover shaped) with a semi elliptical ground plane, loaded with a V-cut at the ground. The proposed antenna has a 14 dB bandwidth from 5.9 to 13.1 GHz, which is suitable for ultra wideband (UWB) outdoor propagation. The prototype is experimentally validated for frequencies within and greater than UWB. Transfer function, impulse response, and group delay has been plotted in order to address the time domain characteristics of the proposed antenna with fidelity factor values. The possible applications cover wireless local area network, C-band, Ku-band, K-band operations, Worldwide Interoperability for Microwave Access, and Wireless USB.

Sign in / Sign up

Export Citation Format

Share Document