Management of glyphosate-resistant Palmer amaranth (Amaranthus palmeri) in 2,4-D–, glufosinate-, and glyphosate-resistant soybean

2020 ◽  
pp. 1-8
Author(s):  
Chandrima Shyam ◽  
Parminder S. Chahal ◽  
Amit J. Jhala ◽  
Mithila Jugulam
Keyword(s):  
United States ◽  
Field Experiments ◽  
The United States ◽  
Palmer Amaranth ◽  
Amaranthus Palmeri ◽  
Soybean Yield ◽  
Chlorimuron Ethyl ◽  
Density And Biomass ◽  
Herbicide Programs ◽  
Biomass Reduction

Abstract Glyphosate-resistant (GR) Palmer amaranth is a problematic, annual broadleaf weed in soybean production fields in Nebraska and many other states in the United States. Soybean resistant to 2,4-D, glyphosate, and glufosinate (Enlist E3TM) has been developed and was first grown commercially in 2019. The objectives of this research were to evaluate the effect of herbicide programs applied PRE, PRE followed by (fb) late-POST (LPOST), and early-POST (EPOST) fb LPOST on GR Palmer amaranth control, density, and biomass reduction, soybean injury, and yield. Field experiments were conducted near Carleton, NE, in 2018, and 2019 in a grower’s field infested with GR Palmer amaranth in 2,4-D–, glyphosate-, and glufosinate-resistant soybean. Sulfentrazone + cloransulam-methyl, imazethapyr + saflufenacil + pyroxasulfone, and chlorimuron ethyl + flumioxazin + metribuzin applied PRE provided 84% to 97% control of GR Palmer amaranth compared with the nontreated control 14 d after PRE. Averaged across herbicide programs, PRE fb 2,4-D and/or glufosinate, and sequential application of 2,4-D or glufosinate applied EPOST fb LPOST resulted in 92% and 88% control of GR Palmer amaranth, respectively, compared with 62% control with PRE-only programs 14 d after LPOST. Reductions in Palmer amaranth biomass followed the same trend; however, Palmer amaranth density was reduced 98% in EPOST fb LPOST programs compared with 91% reduction in PRE fb LPOST and 76% reduction in PRE-only programs. PRE fb LPOST and EPOST fb LPOST programs resulted in an average soybean yield of 4,478 and 4,706 kg ha−1, respectively, compared with 3,043 kg ha−1 in PRE-only programs. Herbicide programs evaluated in this study resulted in no soybean injury. The results of this research illustrate that herbicide programs are available for the management of GR Palmer amaranth in 2,4-D–, glyphosate-, and glufosinate-resistant soybean.

scholarly journals Interaction of dicamba, fluthiacet-methyl, and glyphosate for control of velvetleaf (Abutilon theopharsti) in dicamba/glyphosate-resistant soybean

2021 ◽  
pp. 1-21
Author(s):  
Jose H. S. de Sanctis ◽  
Amit J. Jhala
Keyword(s):  
United States ◽  
Field Experiments ◽  
The United States ◽  
Application Rate ◽  
Herbicide Application ◽  
Soybean Yield ◽  
Agronomic Crops ◽  
Split Plot ◽  
Main Plot ◽  
Biomass Reduction

Abstract Velvetleaf is an economically important weed in agronomic crops in Nebraska and the United States. Dicamba applied alone usually does not provide complete velvetleaf control, particularly when velvetleaf is greater than 15 cm tall. The objectives of this experiment were to evaluate the interaction of dicamba, fluthiacet-methyl, and glyphosate applied alone or in a mixture in two- or three-way combinations for velvetleaf control in dicamba/glyphosate-resistant (DGR) soybean and to evaluate whether velvetleaf height (≤ 12 cm or ≤ 20 cm) at the time of herbicide application influences herbicide efficacy, velvetleaf density, biomass, and soybean yield. Field experiments were conducted near Clay Center, Nebraska in 2019 and 2020. The experiment was arranged in a split-plot with velvetleaf height (≤ 12 cm or ≤ 20 cm) as the main plot treatment and herbicides as sub-plot treatment. Fluthiacet provided ≥ 94% velvetleaf control 28 d after treatment (DAT) and ≥ 96% biomass reduction regardless of application rate or velvetleaf height. Velvetleaf control was 31% to 74% at 28 DAT when dicamba or glyphosate was applied alone to velvetleaf ≤ 20 cm tall compared with 47% to 100% control applied to ≤ 12 cm tall plants. Dicamba applied alone to ≤ 20 cm tall velvetleaf provided < 75% control and < 87% biomass reduction 28 DAT compared with ≥ 90% control with dicamba at 560 g ae ha−1 + fluthiacet at 7.2 g ai ha−1 or glyphosate at 1,260 g ae ha−1. Dicmaba at 280 g ae ha−1 + glyphosate at 630 g ae ha−1 applied to ≤ 20 cm tall velvetleaf resulted in 86% control 28 DAT compared with the expected 99% control. The interaction of dicamba + fluthiacet + glyphosate was additive for velvetleaf control and biomass reduction regardless of application rate and velvetleaf height.

scholarly journals Control of acetolactate synthase inhibitor/glyphosate-resistant Palmer amaranth (Amaranthus palmeri) in isoxaflutole/glufosinate/glyphosate-resistant soybean

2021 ◽  
pp. 1-23
Author(s):  
Jasmine Mausbach ◽  
Suat Irmak ◽  
Debalin Sarangi ◽  
John Lindquist ◽  
Amit J. Jhala
Keyword(s):  
Field Experiments ◽  
Cropping Systems ◽  
Acetolactate Synthase ◽  
The United States ◽  
Palmer Amaranth ◽  
Effective Control ◽  
Synthase Inhibitor ◽  
Density And Biomass ◽  
Als Inhibitor ◽  
Herbicide Programs

Abstract Palmer amaranth is the most problematic and troublesome weed in agronomic cropping systems in the United States. Acetolactate synthase (ALS) inhibitor- and glyphosate-resistant (GR) Palmer amaranth has been confirmed in Nebraska and it is widespread in several counties. Soybean resistant to isoxaflutole/glufosinate/glyphosate has been developed that provides additional herbicide site of action for control of herbicide-resistant weeds. The objectives of this study were to evaluate herbicide programs for control of ALS inhibitor/GR Palmer amaranth and their effect on Palmer amaranth density and biomass, as well as soybean injury and yield in isoxaflutole/glufosinate/glyphosate-resistant soybean. Field experiments were conducted in a grower’s field infested with ALS inhibitor- and GR Palmer amaranth near Carleton, Nebraska, in 2018 and 2019. Isoxaflutole applied alone or mixed with sulfentrazone/pyroxasulfone, flumioxazin/pyroxasulfone, or imazethapyr/saflufenacil/pyroxasulfone provided similar control (86%-99%) of Palmer amaranth 21 d after PRE (DAPRE). At 14 d after early-POST (DAEPOST), isoxaflutole applied PRE and PRE followed by (fb) POST controlled Palmer amaranth 10% to 63% compared to 75% to 96% control with glufosinate applied EPOST in both years. A PRE herbicide fb glufosinate controlled Palmer amaranth 80% to 99% 21 d after late-POST (DALPOST) in 2018 and reduced density 89% to 100% in 2018 and 58% to 100% in 2019 at 14 DAEPOST. No soybean injury was observed from any of the herbicide programs tested in this study. Soybean yield in 2019 was relatively higher due to higher precipitation compared with 2018 with generally no differences between herbicide programs. This research indicates that herbicide programs are available for effective control of ALS inhibitor/GR Palmer amaranth in isoxaflutole/glufosinate/glyphosate-resistant soybean.

Palmer Amaranth (Amaranthus palmeri) and Velvetleaf (Abutilon theophrasti) Control in No-Tillage Conventional (Non–genetically engineered) Soybean Using Overlapping Residual Herbicide Programs

2018 ◽  
Vol 33 (1) ◽  
pp. 95-105 ◽  
Author(s):  
Debalin Sarangi ◽  
Amit J. Jhala
Keyword(s):  
United States ◽  
The United States ◽  
Genetically Engineered ◽  
Palmer Amaranth ◽  
Cost Ratio ◽  
No Tillage ◽  
Benefit Cost Ratio ◽  
No Till ◽  
Benefit Cost ◽  
Herbicide Programs

AbstractDue to depressed corn and soybean prices over the last few years in the United States, growers in Nebraska are showing interest in no-tillage (hereafter referred to as no-till) conventional (non–genetically engineered [non-GE]) soybean production. Due to the increasing number of herbicide-resistant weeds in the United States, weed control in no-till non-GE soybean using POST herbicides is a challenge. The objectives of this study were to compare PRE-only, PRE followed by (fb) POST, and PRE fb POST with residual (POST-WR) herbicide programs for Palmer amaranth and velvetleaf control and soybean injury and yield, as well as to estimate the gross profit margins and benefit–cost ratio of herbicide programs. A field experiment was conducted in 2016 and 2017 at Clay Center, NE. The PRE herbicides tested in this study resulted in ≥95% Palmer amaranth and velvetleaf control at 28 d after PRE (DAPRE). Averaged across the programs, the PRE-only program controlled Palmer amaranth 66%, whereas 86% and 97% control was obtained with the PRE fb POST and PRE fb POST-WR programs, respectively, at 28 d after POST (DAPOST). At 28 DAPOST, the PRE fb POST herbicide programs controlled velvetleaf 94%, whereas the PRE-only program resulted in 85% control. Mixing soil-residual herbicides with foliar-active POST programs did not improve velvetleaf control. Averaged across herbicide programs, PRE fb POST programs increased soybean yield by 10% and 41% in 2016 and 2017, respectively, over the PRE-only programs. Moreover, PRE fb POST-WR programs produced 7% and 40% higher soybean yield in 2016 and 2017, respectively, compared with the PRE fb POST programs. The gross profit margin (US$1,184.3 ha−1) was highest under flumioxazin/pyroxasulfone (PRE) fb fluthiacet-methyl plusS-metolachlor/fomesafen (POST-WR) treatment; however, the benefit–cost ratio was highest (6.1) with the PRE-only program of flumioxazin/chlorimuron-ethyl.

Palmer Amaranth (Amaranthus palmeri) Control by Glufosinate plus Fluometuron Applied Postemergence to WideStrike®Cotton

2013 ◽  
Vol 27 (2) ◽  
pp. 291-297 ◽  
Author(s):  
Kelly A. Barnett ◽  
A. Stanley Culpepper ◽  
Alan C. York ◽  
Lawrence E. Steckel
Keyword(s):  
United States ◽  
Weed Control ◽  
Acetolactate Synthase ◽  
The United States ◽  
Palmer Amaranth ◽  
Effective Control ◽  
Yield Response ◽  
Amaranthus Palmeri ◽  
Cotton Yield ◽  
Cotton Cultivar

Glyphosate-resistant (GR) weeds, especially GR Palmer amaranth, are very problematic for cotton growers in the Southeast and Midsouth regions of the United States. Glufosinate can control GR Palmer amaranth, and growers are transitioning to glufosinate-based systems. Palmer amaranth must be small for consistently effective control by glufosinate. Because this weed grows rapidly, growers are not always timely with applications. With widespread resistance to acetolactate synthase-inhibiting herbicides, growers have few herbicide options to mix with glufosinate to improve control of larger weeds. In a field study using a WideStrike®cotton cultivar, we evaluated fluometuron at 140 to 1,120 g ai ha−1mixed with the ammonium salt of glufosinate at 485 g ae ha−1for control of GR Palmer amaranth 13 and 26 cm tall. Standard PRE- and POST-directed herbicides were included in the systems. Glufosinate alone injured the WideStrike® cotton less than 10%. Fluometuron increased injury up to 25% but did not adversely affect yield. Glufosinate controlled 13-cm Palmer amaranth at least 90%, and there was no improvement in weed control nor a cotton yield response to fluometuron mixed with glufosinate. Palmer amaranth 26 cm tall was controlled only 59% by glufosinate. Fluometuron mixed with glufosinate increased control of the larger weeds up to 28% and there was a trend for greater yields. However, delaying applications until weeds were 26 cm reduced yield 22% relative to timely application. Our results suggest fluometuron mixed with glufosinate may be of some benefit when attempting to control large Palmer amaranth. However, mixing fluometuron with glufosinate is not a substitute for a timely glufosinate application.

Weed control and crop tolerance of micro-encapsulated acetochlor applied sequentially in glyphosate-resistant soybean

2015 ◽  
Vol 95 (5) ◽  
pp. 973-981 ◽  
Author(s):  
Amit J. Jhala ◽  
Mayank S. Malik ◽  
John B. Willis
Keyword(s):  
United States ◽  
Weed Control ◽  
Field Experiments ◽  
The United States ◽  
Soybean Yield ◽  
Application Timing ◽  
Common Waterhemp ◽  
Weed Density ◽  
Crop Tolerance ◽  
Green Foxtail

Jhala, A. J., Malik, M. S. and Willis, J. B. 2015. Weed control and crop tolerance of micro-encapsulated acetochlor applied sequentially in glyphosate-resistant soybean. Can. J. Plant Sci. 95: 973–981. Acetochlor, an acetamide herbicide, has been used for many years for weed control in several crops, including soybean. Micro-encapsulated acetochlor has been recently registered for preplant (PP), pre-emergence (PRE), and post-emergence (POST) application in soybean in the United States. Information is not available regarding the sequential application of acetochlor for weed control and soybean tolerance. The objectives of this research were to determine the effect of application timing of micro-encapsulated acetochlor applied in tank-mixture with glyphosate in single or sequential applications for weed control in glyphosate-resistant soybean, and to determine its impact on soybean injury and yields. Field experiments were conducted at Clay Center, Nebraska, in 2012 and 2013, and at Waverly, Nebraska, in 2013. Acetochlor tank-mixed with glyphosate applied alone PP, PRE, or tank-mixed with flumioxazin, fomesafen, or sulfentrazone plus chlorimuron provided 99% control of common waterhemp, green foxtail, and velvetleaf at 15 d after planting (DAP); however, control declined to ≤40% at 100 DAP. Acetochlor tank-mixed with glyphosate applied PRE followed by early POST (V2 to V3 stage of soybean) or late POST (V4 to V5 stage) resulted in ≥90% control of common waterhemp and green foxtail, reduced weed density to ≤2 plants m−2 and biomass to ≤12 g m−2, and resulted in soybean yields >3775 kg ha−1. The sequential applications of glyphosate plus acetochlor applied PP followed by early POST or late POST resulted in equivalent weed control to the best herbicide combinations included in this study and soybean yield equivalent to the weed free control. Injury to soybean was <10% in each of the treatments evaluated. Micro-encapsulated acetochlor can be a good option for soybean growers for controlling grasses and small-seeded broadleaf weeds if applied in a PRE followed by POST herbicide program in tank-mixture with herbicides of other modes of action.

Palmer Amaranth (Amaranthus palmeri) Management in Dicamba-Resistant Cotton

2015 ◽  
Vol 29 (4) ◽  
pp. 758-770 ◽  
Author(s):  
Charles W. Cahoon ◽  
Alan C. York ◽  
David L. Jordan ◽  
Wesley J. Everman ◽  
Richard W. Seagroves ◽  
...  
Keyword(s):  
United States ◽  
North Carolina ◽  
Field Experiment ◽  
Acetolactate Synthase ◽  
The United States ◽  
Palmer Amaranth ◽  
Amaranthus Palmeri ◽  
Cotton Yield ◽  
Herbicide Resistant

Cotton growers rely heavily upon glufosinate and various residual herbicides applied preplant, PRE, and POST to control Palmer amaranth resistant to glyphosate and acetolactate synthase-inhibiting herbicides. Recently deregulated in the United States, cotton resistant to dicamba, glufosinate, and glyphosate (B2XF cotton) offers a new platform for controlling herbicide-resistant Palmer amaranth. A field experiment was conducted in North Carolina and Georgia to determine B2XF cotton tolerance to dicamba, glufosinate, and glyphosate and to compare Palmer amaranth control by dicamba to a currently used, nondicamba program in both glufosinate- and glyphosate-based systems. Treatments consisted of glyphosate or glufosinate applied early POST (EPOST) and mid-POST (MPOST) in a factorial arrangement of treatments with seven dicamba options (no dicamba, PRE, EPOST, MPOST, PRE followed by [fb] EPOST, PRE fb MPOST, and EPOST fb MPOST) and a nondicamba standard. The nondicamba standard consisted of fomesafen PRE, pyrithiobac EPOST, and acetochlor MPOST. Dicamba caused no injury when applied PRE and only minor, transient injury when applied POST. At time of EPOST application, Palmer amaranth control by dicamba or fomesafen applied PRE, in combination with acetochlor, was similar and 13 to 17% greater than acetochlor alone. Dicamba was generally more effective on Palmer amaranth applied POST rather than PRE, and two applications were usually more effective than one. In glyphosate-based systems, greater Palmer amaranth control and cotton yield were obtained with dicamba applied EPOST, MPOST, or EPOST fb MPOST compared with the standard herbicides in North Carolina. In contrast, dicamba was no more effective than the standard herbicides in the glufosinate-based systems. In Georgia, dicamba was as effective as the standard herbicides in a glyphosate-based system only when dicamba was applied EPOST fb MPOST. In glufosinate-based systems in Georgia, dicamba was as effective as standard herbicides only when dicamba was applied twice.

Evaluating Cover Crops and Herbicides for Glyphosate-Resistant Palmer Amaranth (Amaranthus palmeri) Control in Cotton

2016 ◽  
Vol 30 (2) ◽  
pp. 415-422 ◽  
Author(s):  
Matthew S. Wiggins ◽  
Robert M. Hayes ◽  
Lawrence E. Steckel
Keyword(s):  
Cover Crops ◽  
Cover Crop ◽  
The United States ◽  
Palmer Amaranth ◽  
Amaranthus Palmeri ◽  
Hairy Vetch ◽  
Cereal Rye ◽  
Crimson Clover ◽  
Legume Cover Crops ◽  
Herbicide Programs

Glyphosate-resistant (GR) weeds, especially GR Palmer amaranth, are very problematic in cotton-producing areas of the midsouthern region of the United States. Growers rely heavily on PRE residual herbicides to control Palmer amaranth since few effective POST options exist. Interest in integrating high-residue cover crops with existing herbicide programs to combat GR weeds has increased. Research was conducted in 2013 and 2014 in Tennessee to evaluate GR Palmer amaranth control when integrating cover crops and PRE residual herbicides. Cereal rye, crimson clover, hairy vetch, winter wheat, and combinations of one grass plus one legume were compared with winter weeds without a cover crop followed by fluometuron or acetochlor applied PRE. Biomass of cover crops was determined prior to termination 3 wk before planting. Combinations of grass and legume cover crops accumulated the most biomass (> 3,500 kg ha−1) but by 28 d after application (DAA) the cereal rye and wheat provided the best Palmer amaranth control. Crimson clover and hairy vetch treatments had the greatest number of Palmer amaranth. These cereal and legume blends reduced Palmer amaranth emergence by half compared to non–cover-treated areas. Fluometuron and acetochlor controlled Palmer amaranth 95 and 89%, respectively, at 14 DAA and 54 and 62%, respectively, at 28 DAA. Cover crops in combination with a PRE herbicide did not adequately control Palmer amaranth.

Evaluation of Herbicide Programs for Use in a 2,4-D–Resistant Soybean Technology for Control of Glyphosate-Resistant Palmer Amaranth (Amaranthus palmeri)

2016 ◽  
Vol 30 (2) ◽  
pp. 366-376 ◽  
Author(s):  
M. Ryan Miller ◽  
Jason K. Norsworthy
Keyword(s):  
Weed Management ◽  
Field Experiments ◽  
Palmer Amaranth ◽  
Integrated Weed Management ◽  
Amaranthus Palmeri ◽  
Early Season ◽  
Fully Integrated ◽  
Soil Seedbank ◽  
High Level ◽  
Herbicide Programs

Two separate field experiments were conducted over a 2-yr period in Fayetteville, AR, during 2012 and 2013 to (1) evaluate POST herbicide programs utilizing a premixture of dimethylamine (DMA) salt of glyphosate + choline salt of 2,4-D in a soybean line resistant to 2,4-D, glyphosate, and glufosinate and (2) determine efficacy of herbicide programs that begin with PRE residual herbicides followed by POST applications of 2,4-D choline + glyphosate DMA on glyphosate-resistant Palmer amaranth. In the first experiment, POST applications alone that incorporated the use of residual herbicides with the glyphosate + 2,4-D premixture provided 93 to 99% control of Palmer amaranth at the end of the season. In the second experiment, the use of flumioxazin, flumioxazin + chlorimuron methyl, S-metolachlor + fomesafen, or sulfentrazone + chloransulam applied PRE provided 94 to 98% early-season Palmer amaranth control. Early-season control helped maintain a high level of Palmer amaranth control throughout the growing season, in turn resulting in fewer reproductive Palmer amaranth plants present at soybean harvest compared to most other treatments. Although no differences in soybean yield were observed among treated plots, it was evident that herbicide programs should begin with PRE residual herbicides followed by POST applications of glyphosate + 2,4-D mixed with residual herbicides to minimize late-season escapes and reduce the likelihood of contributions to the soil seedbank. Dependent upon management decisions, the best stewardship of this technology will likely rely on the use multiple effective mechanisms of action incorporated into a fully integrated weed management system.

Effective two-pass herbicide programs to control glyphosate-resistant Palmer amaranth (Amaranthus palmeri) in glyphosate/dicamba-resistant soybean

2020 ◽  
pp. 1-8
Author(s):  
Vipan Kumar ◽  
Rui Liu ◽  
Dallas E. Peterson ◽  
Phillip W. Stahlman
Keyword(s):  
Grain Yield ◽  
Selection Pressure ◽  
Field Experiments ◽  
Agricultural Research ◽  
Palmer Amaranth ◽  
Shoot Biomass ◽  
Amaranthus Palmeri ◽  
State University ◽  
Kansas State University ◽  
Herbicide Programs

Abstract Field experiments were conducted in 2018 and 2019 at Kansas State University Ashland Bottoms (KSU-AB) research farm near Manhattan, KS, and Kansas State University Agricultural Research Center (KSU-ARC) near Hays, KS, to determine the effectiveness of various PRE-applied herbicide premixes and tank mixtures alone or followed by (fb) an early POST (EPOST) treatment of glyphosate + dicamba for controlling glyphosate-resistant (GR) Palmer amaranth in glyphosate/dicamba-resistant (GDR) soybean. In experiment 1, PRE-applied sulfentrazone + S-metolachlor, saflufenacil + imazethapyr + pyroxasulfone, chlorimuron + flumioxazin + pyroxasulfone, and metribuzin + flumioxazin + imazethapyr provided 85% to 94% end-of-season control of GR Palmer amaranth across both sites. In comparison, Palmer amaranth control ranged from 63% to 87% at final evaluation with PRE-applied pyroxasulfone + sulfentrazone, pyroxasulfone + sulfentrazone plus metribuzin, pyroxasulfone + sulfentrazone plus carfentrazone + sulfentrazone, and sulfentrazone + metribuzin at the KSU-ARC site in experiment 2. All PRE fb EPOST (i.e., two-pass) programs provided near-complete (98% to 100%) control of GR Palmer amaranth at both sites. PRE-alone programs reduced Palmer amaranth shoot biomass by 35% to 76% in experiment 1 at both sites, whereas all two-pass programs prevented Palmer amaranth biomass production. No differences in soybean yields were observed among tested programs in experiment 1 at KSU-ARC site; however, PRE-alone sulfentrazone + S-metolachlor, saflufenacil + imazethapyr + pyroxasulfone, and chlorimuron + flumioxazin + pyroxasulfone had lower grain yield (average, 4,342 kg ha−1) compared with the top yielding (4,832 kg ha−1) treatment at the KSU-AB site. PRE-applied sulfentrazone + metribuzin had a lower soybean yield (1,776 kg ha−1) compared with all other programs in experiment 2 at the KSU-ARC site. These results suggest growers should proactively adopt effective PRE-applied premixes fb EPOST programs evaluated in this study to reduce selection pressure from multiple POST dicamba applications for GR Palmer amaranth control in GDR soybean.

Sign in / Sign up

Export Citation Format

Share Document