Effects of the Reservoir Environment and Oilfield Operations on the Iron Mineral Surface Charge Development: An Insight into Their Role in Wettability Alteration

Author(s):  
Isah Mohammed ◽  
Mohamed Mahmoud ◽  
Dhafer Al Shehri ◽  
Muhammad Shahzad Kamal ◽  
Olalekan Saheed Alade
2021 ◽  
Author(s):  
Mohamed Ibrahim Mohamed ◽  
Vladimir Alvarado

Abstract A large percentage of petroleum reserves are located in carbonate reservoirs, which can be divided into limestone, chalk and dolomite. Roughly the oil recovery from carbonates is below the 30% due to the strong oil wetness, low permeability, abundance of natural fractures, and inhomogeneous rock properties Austad (2013). Injection of adjusted brine chemistry into carbonate reservoirs has been reported to increase oil recovery by 5-30% of the original oil in place in field tests and core flooding experiments. Previous studies have shown that adjusted waterflooding recovery in carbonate reservoirs is dependent on the composition and ionic strength of the injection brine (Morrow et al. 1998; Zhang 2005). Many research works have focused on the role of the brine composition in altering the initial wettability state of carbonate rock, which is usually intermediate- to oil-wet. Crude oils contain carboxyl group, -COOH, that can be found in the resin and asphaltenes fractions. The negatively charged carboxyl group, -COOH bond very strongly with the positively charged, sites on the carbonate surface. The carbonate surface, which is positively charged is believed to adsorb the SO42− that is negatively charged. On the other side cations Ca2+ and Mg2+ bind to the negatively charged carboxylic group and release it from the surface. In this study we use a closed system geochemical model to study the effect of the surface-charge dominant species; Ca2+, Mg2+ and SO42− on the carbonate surfaces at 80 °C. The proposed geochemical interactions can possibly lead to a change in the surface charge, altering wettability of the rock by exchanging ions/cations. Brines with various concentrations of Mg2+ and SO42− were prepared in the lab and contact angle between carbonate substrate and crude oil was measured using a rising/captive bubble tensiometer at 80 °C. The composition of the carbonate system was collected from previous literature review and the composition of adjusted brines was used to build a surface sorption database to develop a geochemical model. This model is focused on identifying the reaction paths and the surface behavior that may represent the real system. Changes in carbonate surface wettability were further evaluated using a series of contact angle experiments. Experimental observations and modeling results are concordant and imply that SO42− ions may alter the wettability of carbonate surface at high temperature.


Soil Research ◽  
2007 ◽  
Vol 45 (2) ◽  
pp. 83 ◽  
Author(s):  
G. P. Gillman

Routine analyses for soil cation exchange properties usually give only limited insight into the properties and management of soils containing significant amounts of variable charge. In this paper a procedure for determining a soil Charge Fingerprint is fully described, a model developed from simplified theory to underpin the methodology is discussed, and examples of the usefulness of the approach are given. Operationally defined cation and anion exchange capacities (CEC and AEC) are determined over an appropriate pH range (pH 4 to pH 6 is suggested) using Ca and Cl as the index cations. At low pH, Ca does not always fully saturate the CEC, so that it is necessary to distinguish a Basic CEC (Ca ads.) from the Total CEC (Ca + Al ads.). The graphical representation of CECT, CECB, and AEC v. pH constitutes the Charge Fingerprint. Though not intended as a routine instrument, its determination on key samples in a characterisation exercise places routinely determined basic and acidic cations in context. Examples are given of large scale characterisation studies that link soils from different continents having similar surface charge characteristics; of the assessment of the success or otherwise of producing permanent positive charge in synthetically prepared Ti-substituted goethites; and of the evaluation of the effect of adding crushed basic rock amendment on the surface charge properties of a variable charge soil. The formulation of a Depreciation Index, which classifies soils in terms of their departure in basic cation content from an arbitrarily defined ‘ideal’ condition, is suggested for use in soil resource assessment.


2018 ◽  
Author(s):  
Samuel W. Coles ◽  
Vladislav Ivanistsev

<div>In this article we discuss the nanostructure and calculated the capacitance of a solvate ionic liquid–electrode interfaces, where the electrode has a constant potential, and is thus inherently polarisable. Lithium ions from the lithium</div><div>glyme solvate ionic liquid are found within 0.5 nm of the electrode at all voltages studied, however, their solvation environment varies with voltage. Our study provides molecular insight into the electrode interface of solvate ionic liquids, with many features similar to pure ionic liquids. A comparison with previous studies of the same electrolyte using the fixed surface charge boundary condition is also illuminating, informing future computational studies of electrolyte–electrode interfaces.</div>


2012 ◽  
Vol 46 (5) ◽  
pp. 2755-2763 ◽  
Author(s):  
Dien Li ◽  
Daniel I. Kaplan ◽  
Kimberly A. Roberts ◽  
John C. Seaman

ACS Omega ◽  
2021 ◽  
Author(s):  
Isah Mohammed ◽  
Dhafer Al Shehri ◽  
Mohamed Mahmoud ◽  
Muhammad Shahzad Kamal ◽  
Olalekan Saheed Alade

Minerals ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 372 ◽  
Author(s):  
Lev Filippov ◽  
Saeed Farrokhpay ◽  
Lichau Lyo ◽  
Inna Filippova

Fine and coarse fractions of spodumene were obtained from a pegmatite ore and their flotation was investigated under different conditions. In particular, the optimum pH and collector dosage were studied. It was found that the best flotation performance occurs at pH 10 using 250 mg/L of sodium oleate. It was also observed that upon the addition of CaCl2, spodumene flotation recovery increases to about 90%. In addition, poor floatability was found for spodumene when Na2CO3 was used as a pH regulator (compared to NaOH).The zeta potential data confirmed the adsorption of oleate on the spodumene surface. It was found that activation of spodumene by calcium ions makes the surface charge less negative due to the adsorption of Ca2+ on the surface. The crystallographic properties of spodumene were analyzed. The adsorption of sodium oleate was attributed to the chemisorption of oleate to the exposed Al and Si sites generated after breakage of the Al–O and Si–O bonds on the mineral surface. It was observed that the {110} planes are the most favorable for the adsorption of oleate. The {110} plane is the weakest plane, and spodumene has the highest tendency to cleave along this plane. The XRD data revealed that fine spodumene particles have more {110} planes than the coarser fraction, which may explain why the former has better floatability.


2020 ◽  
Vol 22 (48) ◽  
pp. 27999-28011
Author(s):  
Mohammad Hasan Badizad ◽  
Mohammad Mehdi Koleini ◽  
Hugh Christopher Greenwell ◽  
Shahab Ayatollahi ◽  
Mohammad Hossein Ghazanfari ◽  
...  

This research provides an atomic-level insight into the synergic contribution of mono- and divalent ions to interfacial environment of calcite surfaces exposed to electrolyte solutions containing organic compounds.


Sign in / Sign up

Export Citation Format

Share Document