mineral surface
Recently Published Documents


TOTAL DOCUMENTS

308
(FIVE YEARS 75)

H-INDEX

34
(FIVE YEARS 6)

2021 ◽  
Vol 12 (1) ◽  
pp. 314
Author(s):  
Sylwia Cukrowicz ◽  
Paweł Goj ◽  
Paweł Stoch ◽  
Artur Bobrowski ◽  
Bożena Tyliszczak ◽  
...  

This study complements the knowledge about organobentonites, which are intended to be new binders in foundry technology. In the developed materials, acrylic polymers act as mineral modifying compounds. Modification of montmorillonite in bentonite was carried out in order to obtain a composite containing a polymer as a lustrous carbon precursor. The polymer undergoes thermal degradation during the casting process, which results in the formation of this specific carbon form, ensuring the appropriate quality of the casting surface without negative environmental impact. The present paper reports the results of computational simulation studies (LAMMPS software) aimed at broadening the knowledge of interactions of organic molecules in the form of acrylic acid and acrylate anions (from sodium acrylate) near the montmorillonite surface, which is a simplified model of bentonite/acrylic polymer systems. It has been proven that the –COOH group promotes the adsorption of acrylic acid (AA) to the mineral surface, while acrylate ions tend to be unpredictably scattered, which may be related to the electrostatic repulsion between anions and negatively charged clay surfaces. The simulation results are consistent with the results of structural tests carried out for actual organobentonites. It has been proven that the polymer mainly adsorbs on the mineral surface, although it also partially intercalates into the interlayer spaces of the montmorillonite. This comprehensive research approach is innovative in the engineering of foundry materials. Computer simulation methods have not been used in the production of new binding materials in molding sand technology so far.


2021 ◽  
Vol 2097 (1) ◽  
pp. 012004
Author(s):  
Rui Guo ◽  
Siwei Liu ◽  
Zhenhong Liao ◽  
Ren Liu

Abstract This study is focused on the flotation of a cooper mineral.Chrysocolla is poor flotability, surface porous, high porosity, nonuniform property, so it has strong hydrophilic and difficult dissolution. XRD and SEM were used to detect the properties and surface morphology of chrysocolla. The paper make an experiment, it contain modified polymer adsorption - intermediate metal copper ion connection - collector adsorption testing program. The experiment can exchange mineral surface property which enhancing mineral flotation and hydrophobicity. With the conclusion, the results have a trend that increasing the agents can increase mineral recovery, then mineral recovery reach the stable trend. In the simulation of RSM, mineral recovery is based on 3 factors ammonium, xanthate and agent, those factors interact with each other, simulation find the main factor is agent. RSM response surface method has the function of optimizing test results, improving test efficiency, inputting test influence factors and results, and getting the best test factors and results through test simulation.


2021 ◽  
Author(s):  
Steffen A. Schweizer ◽  
Carsten W. Mueller ◽  
Carmen Höschen ◽  
Pavel Ivanov ◽  
Ingrid Kögel-Knabner

AbstractCorrelations between organic carbon (OC) and fine mineral particles corroborate the important role of the abundance of soil minerals with reactive surfaces to bind and increase the persistence of organic matter (OM). The storage of OM broadly consists of particulate and mineral-associated forms. Correlative studies on the impact of fine mineral soil particles on OM storage mostly combined data from differing sites potentially confounded by other environmental factors. Here, we analyzed OM storage in a soil clay content gradient of 5–37% with similar farm management and mineral composition. Throughout the clay gradient, soils contained 14 mg OC g−1 on average in the bulk soil without showing any systematic increase. Density fractionation revealed that a greater proportion of OC was stored as occluded particulate OM in the high clay soils (18–37% clay). In low clay soils (5–18% clay), the fine mineral-associated fractions had up to two times higher OC contents than high clay soils. Specific surface area measurements revealed that more mineral-associated OM was related to higher OC loading. This suggests that there is a potentially thicker accrual of more OM at the same mineral surface area within fine fractions of the low clay soils. With increasing clay content, OM storage forms contained more particulate OC and mineral-associated OC with a lower surface loading. This implies that fine mineral-associated OC storage in the studied agricultural soils was driven by thicker accrual of OM and decoupled from clay content limitations.


2021 ◽  
Vol 22 (19) ◽  
pp. 10591
Author(s):  
Krzysztof Jan Legawiec ◽  
Mateusz Kruszelnicki ◽  
Anna Bastrzyk ◽  
Izabela Polowczyk

In this paper, we describe an application of mono- and dirhamnolipid homologue mixtures of a biosurfactant as a green agent for destabilisation of a dolomite suspension. Properties of the biosurfactant solution were characterised using surface tension and aggregate measurements to prove aggregation of rhamnolipids at concentrations much lower than the critical micelle concentration. Based on this information, the adsorption process of biosurfactant molecules on the surface of the carbonate mineral dolomite was investigated, and the adsorption mechanism was proposed. The stability of the dolomite suspension after rhamnolipid adsorption was investigated by turbidimetry. The critical concentration of rhamnolipid at which destabilisation of the suspension occurred most effectively was found to be 50 mg·dm−3. By analysing backscattering profiles, solid-phase migration velocities were calculated. With different amounts of biomolecules, this parameter can be modified from 6.66 to 20.29 mm·h−1. Our study indicates that the dolomite suspension is destabilised by hydrophobic coagulation, which was proved by examining the wetting angle of the mineral surface using the captive bubble technique. The relatively low amount of biosurfactant used to destabilise the system indicates the potential application of this technology for water treatment or modification of the hydrophobicity of mineral surfaces in mineral engineering.


2021 ◽  
Vol 171 ◽  
pp. 107088
Author(s):  
Hepeng Zhou ◽  
Zhizhao Yang ◽  
Yongbing Zhang ◽  
Haisheng Han ◽  
Kunzhong He ◽  
...  

Minerals ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 924
Author(s):  
Irmina Ćwieląg-Piasecka ◽  
Magdalena Debicka ◽  
Agnieszka Medyńska-Juraszek

The affinity of different soil colloids to retain carbaryl, carbofuran and metolachlor in sandy loam and loam soil from mineral, surface horizons was investigated. The undisturbed soil samples and soils amended with colloids—kaolinite (K), montmorillonite (Mt), illite (Il), goethite (G), humic acid (HA)—were mixed with the pesticides for sorption–desorption studies. Their sorption magnitude in pristine soils followed the sequence metolachlor > carbaryl > carbofuran, with loam soil being a better pesticides retarder than sandy soil. The biggest magnitude of carbaryl sorption in light soil was observed in samples with the addition of HA (92.7%), Il (92.3%) and Ge (87.5%), whereas for carbofuran it was goethite (52.3%). Metolachlor uptake was significantly enhanced by 2:1 clays (Mt-85.0%, Il-69.4%), goethite (73.3%) and humic acids (75.4%). The loamy soil sorption capacity of the studied pesticides was blocked by the natural organic matter potentially due to the formation of organo-mineral complexes. HA (66.8%) was the most effective sorbent for carbaryl in the loamy soil, whereas Mt (55.1%) and HA (40.3%) for carbofuran. Metolachlor was retained to the same extent in all loamy soil variants (75.8–83.6%) and its desorption values were the lowest. Carbofuran demonstrated the greatest ability to leach among the studied chemicals.


Desalination ◽  
2021 ◽  
Vol 509 ◽  
pp. 115071
Author(s):  
Zhaoyi (Joey) Dai ◽  
Yi-Tsung Lu ◽  
Amy Kan ◽  
Cianna Leschied ◽  
Yue Zhao ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document