scholarly journals Toward Uniformly Dispersed Battery Electrode Composite Materials: Characteristics and Performance

2016 ◽  
Vol 8 (5) ◽  
pp. 3452-3463 ◽  
Author(s):  
Yo Han Kwon ◽  
Matthew M. Huie ◽  
Dalsu Choi ◽  
Mincheol Chang ◽  
Amy C. Marschilok ◽  
...  
Keyword(s):  
Composite Materials ◽  
Battery Electrode ◽  
And Performance

scholarly journals Effect of Structural Differences on the Mechanical Properties of 3D Integrated Woven Spacer Sandwich Composites

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4284
Author(s):  
Lvtao Zhu ◽  
Mahfuz Bin Rahman ◽  
Zhenxing Wang
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Three Dimensional ◽  
Sheet Thickness ◽  
Physical And Mechanical Properties ◽  
Sandwich Composites ◽  
Computed Tomography Images ◽  
And Performance ◽  
Industrial Textiles ◽  
Load Conditions

Three-dimensional integrated woven spacer sandwich composites have been widely used as industrial textiles for many applications due to their superior physical and mechanical properties. In this research, 3D integrated woven spacer sandwich composites of five different specifications were produced, and the mechanical properties and performance were investigated under different load conditions. XR-CT (X-ray computed tomography) images were employed to visualize the microstructural details and analyze the fracture morphologies of fractured specimens under different load conditions. In addition, the effects of warp and weft direction, face sheet thickness, and core pile height on the mechanical properties and performance of the composite materials were analyzed. This investigation can provide significant guidance to help determine the structure of composite materials and design new products according to the required mechanical properties.

ChemInform Abstract: Semiconductor-Based Composite Materials: Preparation, Properties, and Performance

ChemInform ◽  
2010 ◽  
Vol 32 (48) ◽  
pp. no-no
Author(s):  
Krishnan Rajeshwar ◽  
Norma R. de Tacconi ◽  
C. R. Chenthamarakshan
Keyword(s):  
Composite Materials ◽  
And Performance ◽  
Materials Preparation

scholarly journals Rocess Design of Fiber Reinforced Magnesium Matrix Composites

2018 ◽  
Vol 1 (1) ◽  
Author(s):  
Ding Hualun
Keyword(s):  
Composite Materials ◽  
Matrix Composites ◽  
Deposition Method ◽  
Fiber Reinforced ◽  
Casting Method ◽  
Magnesium Matrix ◽  
Preparation Methods ◽  
Magnesium Matrix Composites ◽  
The Matrix ◽  
And Performance

This paper chooses magnesium as the matrix of composite materials, selects carbon fi ber as reinforcement, anddesigns the composite scheme according to the structure and performance of Mg-based composites. The performancecharacteristics and application prospect of fiber-reinforced magnesium matrix composites are introduced. Wait. Inthis paper, the process of preparing carbon fi ber magnesium matrix composites by compression casting method andspray deposition method is designed. The process fl ow chart of these two design schemes is determined by analyzingthe principle of these two kinds of preparation methods, and the specifi c problems of the process are analyzed andsummarized.

URSS/PVA/WP Composite Materials: Preparation and Performance

2014 ◽  
Vol 968 ◽  
pp. 80-83
Author(s):  
Chuan Bao Wu ◽  
Bo Qiao
Keyword(s):  
Tensile Strength ◽  
Composite Materials ◽  
Rice Straw ◽  
Hot Pressing ◽  
Vinyl Alcohol ◽  
Tensile Elongation ◽  
Environmentally Friendly ◽  
Waste Paper ◽  
Poly Vinyl Alcohol ◽  
And Performance

A novel kind of environmentally friendly composite materials containing upper part of rice straw segments (URSS), poly (vinyl alcohol) (PVA) and waste paper (WP) were prepared by hot-pressing at 140°C for 10 min. The tensile strength, tensile elongation and hardness of composites were measured. Results showed that the tensile strength and the strength at tensile break of the composites first increased and then decreased with increasing PVA content. Tensile strength was higher than the strength at tensile break at different PVA contents, indicating that URSS/PVA/WP composite materials had certain toughness. Otherwise, URSS/PVA/WP composite materials had higher tensile strength than URSS/PVA composites. The tensile strengths of them were respectively 9.25 MPa and 3.9 MPa when prepared at PVA content of 40%. The hardness of composites lay between 90 and 96. Negligible difference exists in every composite.

817 Development and Performance of Damping Composite Materials

2011 ◽  
Vol 2011.48 (0) ◽  
pp. 277-278
Author(s):  
Takuo HASHIDUME ◽  
Shinichi TAKEMURA ◽  
Toshiaki NATSUKI ◽  
Qing-Qing Nl
Keyword(s):  
Composite Materials ◽  
And Performance

Controlling the morphology and property of carbon fiber/polyaniline composites for supercapacitor electrode materials by surface functionalization

RSC Advances ◽  
2016 ◽  
Vol 6 (18) ◽  
pp. 14712-14719 ◽  
Author(s):  
Fuyou Ke ◽  
Jun Tang ◽  
Shanyi Guang ◽  
Hongyao Xu
Keyword(s):  
Composite Materials ◽  
Carbon Fiber ◽  
Surface Functionalization ◽  
Electrode Materials ◽  
Carbon Materials ◽  
Supercapacitor Electrode ◽  
And Performance ◽  
Polyaniline Composites ◽  
Supercapacitor Electrode Materials ◽  
Effect Of Surface

The effect of surface functionalization of carbon materials on the morphology and performance of carbon/polymer composite materials for supercapacitor electrodes was investigated here.

Preparation and performance evaluation of enantioselective polymer composite materials

RSC Advances ◽  
2013 ◽  
Vol 3 (11) ◽  
pp. 3667 ◽  
Author(s):  
Pravin G. Ingole ◽  
Hari C. Bajaj ◽  
Kripal Singh
Keyword(s):  
Performance Evaluation ◽  
Composite Materials ◽  
Polymer Composite ◽  
Polymer Composite Materials ◽  
And Performance

scholarly journals Impact of Polishing Systems on the Surface Roughness and Microhardness of Nanocomposites

2017 ◽  
Vol 18 (8) ◽  
pp. 647-651 ◽  
Author(s):  
Yasser Alfawaz
Keyword(s):  
Surface Roughness ◽  
Composite Materials ◽  
Hardness Test ◽  
Composite Resins ◽  
Control Group ◽  
Surface Microhardness ◽  
Different Types ◽  
One Step ◽  
Polishing Procedures ◽  
And Performance

ABSTRACT Aim The aim of this article is to evaluate the influence of finishing and polishing techniques on the surface roughness and microhardness of two composite resins with two different types of polishing systems. Materials and methods A total of 30 disk-shaped specimens of nanocomposite Filtek™ Z350 and Ceram-X® were prepared. They were divided into three groups. The control group (n = 10) received no finishing and polishing. The remaining specimens were divided into two groups, and they received polishing and finishing either with PoGo or Sof-Lex system. After the polishing procedures, average surface roughness (Ra) was assessed with a surface profilometer. The microhardness was determined using a Vickers hardness test. The data were tabulated and analyzed. Results The smoothest surfaces were noticed with the control group (Mylar strips) in both composite materials tested. The PoGo one-step polishing system showed significantly better surface roughness compared with the Sof-Lex polishing system. The microhardness did not show any significant variations after finishing and polishing. Conclusion It can be concluded that the use of PoGo® onestep polishing system resulted in smoother surface with both composite materials studied compared with the Sof-Lex system. The finishing and polishing system had little influence on the surface microhardness. Clinical significance The finishing procedure and polishing system can affect the physical properties and performance of resin composites. How to cite this article Alfawaz Y. Impact of Polishing Systems on the Surface Roughness and Microhardness of Nanocomposites. J Contemp Dent Pract 2017;18(8):647-651.

Sign in / Sign up

Export Citation Format

Share Document