Electrochemical and Chemical Reduction of Disulfur Dinitride: Formation of [S4N4]−•, EPR Spectroscopic Characterization of the [S2N2H]•Radical, and X-ray Structure of [Na(15-crown-5)][S3N3]

2009 ◽  
Vol 48 (19) ◽  
pp. 9454-9462 ◽  
Author(s):  
Tracey L. Roemmele ◽  
Jari Konu ◽  
René T. Boeré ◽  
Tristram Chivers
Molbank ◽  
10.3390/m1227 ◽  
2021 ◽  
Vol 2021 (2) ◽  
pp. M1227
Author(s):  
Bibi Hanifa ◽  
Muhammad Sirajuddin ◽  
Zafran Ullah ◽  
Sumera Mahboob ◽  
See Mun Lee ◽  
...  

The synthesis and spectroscopic characterization of the glutaric acid-amide derivative, 2,4-Cl2C6H3N(H)C(=O)(CH2)3C(=O)OH (1), are described. The X-ray crystal structure determination of (1) shows the backbone of the molecule to be kinked about the methylene-C–N(amide) bond as seen in the C(p)–N–C(m)–C(m) torsion angle of −157.0(2)°; m = methylene and p = phenyl. An additional twist in the molecule is noted between the amide and phenyl groups as reflected in the C(m)–N–C(p)–C(p) torsion angle of 138.2(2)°. The most prominent feature of the molecular packing is the formation of supramolecular tapes assembled through carboxylic acid-O–H…O(carbonyl) and amide-N–H…O(amide) hydrogen bonding.


2010 ◽  
Vol 65 (1) ◽  
pp. 90-94 ◽  
Author(s):  
Thomas Harmening ◽  
Rainer Pöttgen

Samples of EuRu4B4 and of the new boride EuRuB4 were prepared from europium, RuB, and RuB4 precursor alloys, respectively, in sealed tantalum tubes in an induction furnace. EuRu4B4 crystallizes with the LuRu4B4 structure, a = 748.1(1), c = 1502.3(4) pm. The structure of EuRuB4 was refined on the basis of X-ray diffractometer data: Pbam, a = 599.7(1), b = 1160.7(3), c = 358.06(7) pm, wR2 = 0.0691, 474 F2 values, and 38 variables. The four crystallographically independent boron sites build up layers which consist of almost regular pentagons and heptagons which sandwich the ruthenium and europium atoms, respectively. Within the two-dimensional [B4] networks each boron atom has a slightly distorted trigonal-planar boron coordination with B-B distances in the range 172 - 186 pm. Temperature-dependent 151Eu Mössbauer spectra show stable trivalent europium for EuRu4B4 and EuRuB4


1990 ◽  
Vol 45 (10) ◽  
pp. 1416-1424 ◽  
Author(s):  
W. Preetz ◽  
P. Hollmann ◽  
G. Thiele ◽  
H. Hillebrecht

The triply bonded octahalogenodiosmate(III) anions [Os2X8]2-, previously known with X = Cl, Br, have now been extended to include the iodide with two staggered OsI4 units. This compound was prepared by treating [Os2Cl8]2- with Nal at room temperature in acetone solution. The structure determination by X-ray diffractometry on single crystals of (PPN)2[Os2I8] · 2 CH2Cl2, reveals crystallization in the monoclinic system, space group P21/c with Z = 4. The Os-Os triple bond is with 2.212(1) Å the longest within the three octahalogenodiosmates(III). The Raman spectra show ν(OsOs) at 285, [Os2Cl8]2-; at 287, [Os2Br8]2- and for the iodo compound at 270.1 cm-1 with up to three overtones. The spectroscopic constants are calculated to be ω1 = 270.9 cm-1; X11 = -0.50 cm-1. The 10 Κ UV-VIS spectra of solid [(n-C4H9)4N]2[Os2X8] exhibit δ-π* transitions with maxima at 723, 690 and 643 nm, superimposed by vibrational fine structures with long progressions of 195, 211 and 183 cm-1 for X = Cl, Br, I, respectively. Oxidation of [Os2X8]2-, X = Cl, Br with the corresponding halogen leads to the cleavage of the Os-Os bond, and the dekahalogenodiosmates(IV), [Os2X10]2-, are formed


2020 ◽  
Vol 508 ◽  
pp. 145244 ◽  
Author(s):  
Qiao Hu ◽  
Ruiqin Tan ◽  
Wenqing Yao ◽  
Yuanyuan Cui ◽  
Jia Li ◽  
...  

Polymers ◽  
2019 ◽  
Vol 11 (9) ◽  
pp. 1498 ◽  
Author(s):  
Abdul Hafeez ◽  
Zareen Akhter ◽  
John F. Gallagher ◽  
Nawazish Ali Khan ◽  
Asghari Gul ◽  
...  

Bis-aldehyde monomers 4-(4′-formyl-phenoxy)benzaldehyde (3a), 3-methoxy-4-(4′-formyl-phenoxy)benzaldehyde (3b), and 3-ethoxy-4-(4′-formyl-phenoxy)benzaldehyde (3c) were synthesized by etherification of 4-fluorobenzaldehyde (1) with 4-hydroxybenzaldehyde (2a), 3-methoxy-4-hydroxybenzaldehyde (2b), and 3-ethoxy-4-hydroxybenzaldehyde (2c), respectively. Each monomer was polymerized with p-phenylenediamine and 4,4′-diaminodiphenyl ether to yield six poly(azomethine)s. Single crystal X-ray diffraction structures of 3b and 3c were determined. The structural characterization of the monomers and poly(azomethine)s was performed by FT-IR and NMR spectroscopic techniques and elemental analysis. Physicochemical properties of polymers were investigated by powder X-ray diffraction, thermogravimetric analysis (TGA), viscometry, UV–vis, spectroscopy and photoluminescence. These polymers were subjected to electrical conductivity measurements by the four-probe method, and their conductivities were found to be in the range 4.0 × 10−5 to 6.4 × 10−5 Scm−1, which was significantly higher than the values reported so far.


2016 ◽  
Vol 71 (1) ◽  
pp. 51-55 ◽  
Author(s):  
Oscar E. Piro ◽  
Gustavo A. Echeverría ◽  
Beatriz S. Parajón-Costa ◽  
Enrique J. Baran

AbstractMagnesium acesulfamate, Mg(C4H4NO4S)2·6H2O, was prepared by the reaction of acesulfamic acid and magnesium carbonate in aqueous solution, and characterized by elemental analysis. Its crystal structure was determined by single crystal X-ray diffraction methods. The substance crystallizes in the triclinic space group P1̅ with one molecule per unit cell. The FTIR spectrum of the compound was also recorded and is briefly discussed. Some comparisons with other simple acesulfamate and saccharinate salts are also made.


Sign in / Sign up

Export Citation Format

Share Document