Strategy To Produce Microcellular Foamed Poly(lactic acid)/Wood-Flour Composites in a Continuous Extrusion Process

2013 ◽  
Vol 52 (34) ◽  
pp. 12032-12040 ◽  
Author(s):  
Laurent M. Matuana ◽  
Carlos A. Diaz
Keyword(s):  
Lactic Acid ◽  
Wood Flour ◽  
Extrusion Process ◽  
Poly Lactic Acid ◽  
Continuous Extrusion

scholarly journals Silane Modified Wood Flour Blended with Poly(lactic acid) and its Effects on Composite Performance

BioResources ◽  
2015 ◽  
Vol 10 (3) ◽  
Author(s):  
Shanshan Lv ◽  
Haiyan Tan ◽  
Jiyou Gu ◽  
Yanhua Zhang
Keyword(s):  
Lactic Acid ◽  
Wood Flour ◽  
Poly Lactic Acid ◽  
Modified Wood

scholarly journals Styrene-Assisted Maleic Anhydride Grafted Poly(lactic acid) as an Effective Compatibilizer for Wood Flour/Poly(lactic acid) Bio-Composites

Polymers ◽  
2017 ◽  
Vol 9 (11) ◽  
pp. 623 ◽  
Author(s):  
Jun Du ◽  
Youyong Wang ◽  
Xinfeng Xie ◽  
Min Xu ◽  
Yongming Song
Keyword(s):  
Lactic Acid ◽  
Maleic Anhydride ◽  
Wood Flour ◽  
Poly Lactic Acid

Mechanical properties of wood flour/poly (lactic acid) composites coupled with waterborne silane-polyacrylate copolymer emulsion

Holzforschung ◽  
2016 ◽  
Vol 70 (5) ◽  
pp. 439-447 ◽  
Author(s):  
Ru Liu ◽  
Shupin Luo ◽  
Jinzhen Cao ◽  
Yu Chen
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
High Performance ◽  
Coupling Effect ◽  
Wood Flour ◽  
Flexural Modulus ◽  
Coupling Agents ◽  
Poly Lactic Acid ◽  
Effective Coupling ◽  
Methacryloxypropyl Trimethoxysilane

Abstract Wood flour/polylactic acid (WF/PLA) composites were produced with a WF content of 50% based on three types of waterborne polyacrylate (PA) emulsions including a PA homopolymer emulsion and two types of silane-PA copolymer emulsions as coupling agents. Two silanes were in focus, namely, γ-methacryloxypropyl- trimethoxysilane (silane-1) and vinyltrimethoxysilane (silane-2). The emulsions and the modified WFs were characterized, and the effects were investigated in terms of emulsion type and their loading levels on the mechanical properties of WF/PLA composites. (1) Both types of silanes could be successfully copolymerized with PA to form stable emulsions. (2) With increasing PA loading, the mechanical properties (except for flexural modulus) of the composites increased at first before reaching the maximum values at 4% PA loading and then the properties worsened. However, these values were larger than those of pure composites, especially in cases when PA-silane emulsions were applied. (3) PA modified with silane-1 showed the best coupling effect among all the three PA emulsions. The results can be interpreted that PA emulsions are effective coupling agents for the preparation of high-performance WPCs.

scholarly journals Hybrid Biocomposites Based on Poly(Lactic Acid) and Silica Aerogel for Food Packaging Applications

Materials ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 4910 ◽  
Author(s):  
Alejandro Aragón-Gutierrez ◽  
Marina P. Arrieta ◽  
Mar López-González ◽  
Marta Fernández-García ◽  
Daniel López
Keyword(s):  
Thermal Stability ◽  
Lactic Acid ◽  
Silica Aerogel ◽  
Food Packaging ◽  
Mechanical Performance ◽  
Composite Films ◽  
Barrier Properties ◽  
Extrusion Process ◽  
Poly Lactic Acid ◽  
Barrier Performance

Bionanocomposites based on poly (lactic acid) (PLA) and silica aerogel (SiA) were developed by means of melt extrusion process. PLA-SiA composite films were plasticized with 15 wt.% of acetyl (tributyl citrate) (ATBC) to facilitate the PLA processability as well as to attain flexible polymeric formulations for films for food packaging purposes. Meanwhile, SiA was added in four different proportions (0.5, 1, 3 and 5 wt.%) to evaluate the ability of SiA to improve the thermal, mechanical, and barrier performance of the bionanocomposites. The mechanical performance, thermal stability as well as the barrier properties against different gases (carbon dioxide, nitrogen, and oxygen) of the bionanocomposites were evaluated. It was observed that the addition of 3 wt.% of SiA to the plasticized PLA-ATBC matrix showed simultaneously an improvement on the thermal stability as well as the mechanical and barrier performance of films. Finally, PLA-SiA film formulations were disintegrated in compost at the lab-scale level. The combination of ATBC and SiA sped up the disintegration of PLA matrix. Thus, the bionanocomposites produced here show great potential as sustainable polymeric formulations with interest in the food packaging sector.

Effect of Compatibilizers on Composite Materials of Bio-Ethanol Byproduct-Poly(lacticacid)

2012 ◽  
Vol 204-208 ◽  
pp. 4088-4092
Author(s):  
Ming Ming Zhang ◽  
Xiao Huan Liu ◽  
Chun Peng Wang ◽  
Li Wei Jin
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Composite Materials ◽  
Extrusion Process ◽  
Poly Lactic Acid ◽  
Twin Screw Extrusion ◽  
Screw Extrusion ◽  
Twin Screw ◽  
Process Effects ◽  
Properties Of Composites

The blend composite materials of bio-ethanol byproduct-Poly(lactic acid) (PLA) were produced by a twin-screw extrusion process. Effects of bio-ethanol byproduct (BEB) contents and different compatibilizers on properties of composite materials were investigated. The research showed that with the increase of contents of bio-ethanol byproduct, the mechanical properties decreased. The mechanical properties of composites were improved by adding the compatibilizers, especially the polypropylene grafted maleic anhydride (PP-MAH). When the PP-MAH content was 2.5%, the mechanical properties of the composite materials were superior to others.

scholarly journals Rheology of Wood Flour Filled Poly(lactic acid)

2017 ◽  
Vol 200 ◽  
pp. 61-67 ◽  
Author(s):  
Valentina Mazzanti ◽  
Francesco Mollica
Keyword(s):  
Lactic Acid ◽  
Wood Flour ◽  
Poly Lactic Acid

scholarly journals Feasibility of Reprocessing Natural Fiber Filled Poly(lactic acid) Composites: An In-Depth Investigation

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Sujal Bhattacharjee ◽  
Dilpreet S. Bajwa
Keyword(s):  
Lactic Acid ◽  
Natural Fiber ◽  
Environmental Concern ◽  
Wood Flour ◽  
Gel Permeation Chromatography ◽  
Thermomechanical Properties ◽  
Poly Lactic Acid ◽  
Filler Concentration ◽  
Scanning Calorimetry ◽  
Abrupt Decrease

Poly(lactic acid) (PLA) based composites are biodegradable; their disposal after single use may be needless and uneconomical. Prodigal disposal of these composites could also create an environmental concern and additional demand for biobased feedstock. Under these circumstances, recycling could be an effective solution, since it will widen the composite service life and prevent the excessive use of natural resources. This research investigates an in-depth impact of recycling on the mechanical and thermomechanical properties of oak wood flour based PLA composites. Two composite formulations (30 and 50 wt% filler), each with 3 wt% coupling agent (PLA-g-MA), were produced and reprocessed six times by extrusion followed by injection molding. Measurements of fiber length and molecular weight of polymer were, respectively, carried out by gel permeation chromatography (GPC). Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) tools were used to study morphological and molecular alterations. With consecutive recycling, PLA composites showed a gradual decrease in strength and stiffness properties and an increase in strain properties. The 50% and 30% filler concentration of fibers in the composite showed an abrupt decrease in strength properties after six and two reprocessing cycles, respectively.

Biomass-Based Composites from Poly(lactic acid) and Wood Flour by Vapor-Phase Assisted Surface Polymerization

2010 ◽  
Vol 3 (2) ◽  
pp. 385-391 ◽  
Author(s):  
Donghee Kim ◽  
Yoshito Andou ◽  
Yoshihito Shirai ◽  
Haruo Nishida
Keyword(s):  
Lactic Acid ◽  
Vapor Phase ◽  
Wood Flour ◽  
Poly Lactic Acid ◽  
Surface Polymerization
Sign in / Sign up

Export Citation Format

Share Document