Molecular Friction Mechanisms Across Nanofilms of a Bilayer-Forming Ionic Liquid

2014 ◽  
Vol 5 (22) ◽  
pp. 4032-4037 ◽  
Author(s):  
Alexander M. Smith ◽  
Michael A. Parkes ◽  
Susan Perkin
Keyword(s):  
Ionic Liquid ◽  
Friction Mechanisms ◽  
Molecular Friction

Functionalized Ionic Liquids as Lubricants for Steel-Steel Contact

2011 ◽  
Vol 138-139 ◽  
pp. 630-634 ◽  
Author(s):  
Li Ye Zhu ◽  
Li Gong Chen ◽  
Xin Yang ◽  
Hong Bin Song
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Physicochemical Properties ◽  
Tribological Properties ◽  
Friction And Wear ◽  
Friction Mechanisms ◽  
Ester Group ◽  
Friction Reducing

A new series of functionalized ionic liquids containing ester-group were synthesized through a typical two-step way. The physicochemical properties of the functionalized ionic liquids were studied and the tribological properties of them as lubricants for steel-steel contact were evaluated on an SRV friction and wear tester and compared with the perfluoroalkylpolyether (PFPE), a low-volatility and fluorine containing lubricant, and a conventional ionic liquid, 1-butyl-3-methy imidazolium tetrafluoroborate (LB104), which is nonfunctionalized. Results showed that all the ionic liquids studied in this paper have better lubricities than PFPE as lubricants for steel-steel friction pairs. Functionalized ionic liquids show worse friction reducing abilities at relatively lower loads, which could be ascribed to their higher viscosities, but they always exhibit better anti-wear abilities than LB104. The possible friction mechanisms were discussed.

Soft ionic liquid based resistive memory characteristics in a two terminal discrete polydimethylsiloxane cylindrical microchannel

2020 ◽  
Vol 8 (38) ◽  
pp. 13368-13374
Author(s):  
Muhammad Umair Khan ◽  
Gul Hassan ◽  
Jinho Bae
Keyword(s):  
Ionic Liquid ◽  
Acrylic Acid ◽  
Sodium Hydroxide ◽  
Sodium Salt ◽  
Resistive Memory ◽  
Cylindrical Microchannel ◽  
Memory Characteristics ◽  
Poly Acrylic Acid

This paper proposes a novel soft ionic liquid (IL) electrically functional device that displays resistive memory characteristics using poly(acrylic acid) partial sodium salt (PAA-Na+:H2O) solution gel and sodium hydroxide (NaOH) in a thin polydimethylsiloxane (PDMS) cylindrical microchannel.

Elucidation of imidazolium-based ionic liquid cations binding to iron porphyrin from a QM/MM framework

2020 ◽  
Author(s):  
Jindal Shah ◽  
Atiya Banerjee
Keyword(s):  
Ionic Liquid ◽  
Iron Porphyrin

Ionic liquid micellar extraction for quantitative determination of sesquiterpenic acids in Valerianae Radix

Planta Medica ◽  
2015 ◽  
Vol 81 (16) ◽  
Author(s):  
I Svinyarov ◽  
A Nedelcheva ◽  
MG Bogdanov
Keyword(s):  
Ionic Liquid ◽  
Quantitative Determination ◽  
Micellar Extraction

Enhancement of diosgenin extraction from Fenugreek (Trigonella foenum-graecum) with a new ionic liquid-based assisted method

Planta Medica ◽  
2016 ◽  
Vol 81 (S 01) ◽  
pp. S1-S381
Author(s):  
S Aminkar ◽  
A Shojaeiyan ◽  
M Ayyari
Keyword(s):  
Ionic Liquid ◽  
Trigonella Foenum Graecum

Microwave-assisted oxidation of a secondary alcohol using a Gold catalyst immobilized onto gel-supported Ionic Liquid like phases (g-SILLPs)

2008 ◽  
Author(s):  
Julián Restrepo ◽  
Santiago Luis ◽  
M. Burguete ◽  
Eduardo García-Verdugo
Keyword(s):  
Ionic Liquid ◽  
Secondary Alcohol ◽  
Gold Catalyst ◽  
Supported Ionic Liquid ◽  
Microwave Assisted

Enhanced Ion Transport in an Ether Aided Super Concentrated Ionic Liquid Electrolyte for Long-Life Practical Lithium Metal Battery Applications

2020 ◽  
Author(s):  
Urbi Pal ◽  
Fangfang Chen ◽  
Derick Gyabang ◽  
Thushan Pathirana ◽  
Binayak Roy ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Ion Transport ◽  
Current Density ◽  
Coulombic Efficiency ◽  
High Energy ◽  
Liquid Electrolyte ◽  
High Mass ◽  
Lithium Metal ◽  
Ionic Liquid Electrolyte ◽  
Lithium Metal Battery

We explore a novel ether aided superconcentrated ionic liquid electrolyte; a combination of ionic liquid, <i>N</i>-propyl-<i>N</i>-methylpyrrolidinium bis(fluorosulfonyl)imide (C<sub>3</sub>mpyrFSI) and ether solvent, <i>1,2</i> dimethoxy ethane (DME) with 3.2 mol/kg LiFSI salt, which offers an alternative ion-transport mechanism and improves the overall fluidity of the electrolyte. The molecular dynamics (MD) study reveals that the coordination environment of lithium in the ether aided ionic liquid system offers a coexistence of both the ether DME and FSI anion simultaneously and the absence of ‘free’, uncoordinated DME solvent. These structures lead to very fast kinetics and improved current density for lithium deposition-dissolution processes. Hence the electrolyte is used in a lithium metal battery against a high mass loading (~12 mg/cm<sup>2</sup>) LFP cathode which was cycled at a relatively high current rate of 1mA/cm<sup>2</sup> for 350 cycles without capacity fading and offered an overall coulombic efficiency of >99.8 %. Additionally, the rate performance demonstrated that this electrolyte is capable of passing current density as high as 7mA/cm<sup>2</sup> without any electrolytic decomposition and offers a superior capacity retention. We have also demonstrated an ‘anode free’ LFP-Cu cell which was cycled over 50 cycles and achieved an average coulombic efficiency of 98.74%. The coordination chemistry and (electro)chemical understanding as well as the excellent cycling stability collectively leads toward a breakthrough in realizing the practical applicability of this ether aided ionic liquid electrolytes in lithium metal battery applications, while delivering high energy density in a prototype cell.

Surface confinement induces the formation of solid-like insulating ionic liquid nanostructures

2017 ◽  
Author(s):  
Massimiliano Galluzzi ◽  
Simone Bovio ◽  
Paolo Milani ◽  
Alessandro Podestà
Keyword(s):  
Ionic Liquid ◽  
Electrical Properties ◽  
Electric Fields ◽  
Relative Dielectric Constant ◽  
Ionic Mobility ◽  
Electric Properties ◽  
Bulk Liquid ◽  
Structural Reorganization ◽  
Surface Confinement ◽  
Insulator Layers

We report on the modification of the electric properties of the imidazolium-based [BMIM][NTf2] ionic liquid upon surface confinement in the sub-monolayer regime. Solid-like insulating nanostructures of [BMIM][NTf2] spontaneously form on a variety of insulating substrates, at odd with the liquid and conductive nature of the same substances in the bulk phase. A systematic spatially resolved investigation by atomic force microscopy of the morphological, mechanical and electrical properties of [BMIM][NTf2] nanostructures showed that this liquid substance rearranges into lamellar nanostructures with a high degree of vertical order and enhanced resistance to mechanical compressive stresses and very intense electric fields, denoting a solid-like character. The morphological and structural reorganization has a profound impact on the electric properties of supported [BMIM][NTf2] islands, which behave like insulator layers with a relative dielectric constant between 3 and 5, comparable to those of conventional ionic solids, and significantly smaller than those measured in the bulk ionic liquid. These results suggest that in the solid-like ordered domains confined either at surfaces or inside the pores of the nanoporous electrodes of photo-electrochemical devices, the ionic mobility and the overall electrical properties can be significantly perturbed with respect to the bulk liquid phase, which would likely influence the<br>performance of the devices.<br>

Mapping the “Extra Solvent Power, ESP” of Ionic Liquids for Monomers, Polymers and Globular Nanoparticles

2017 ◽  
Author(s):  
Jose A. Pomposo
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Linear Polymers ◽  
Green Solvents ◽  
Ionic Polymers ◽  
First Time ◽  
Solvent Power

Understanding the miscibility behavior of ionic liquid (IL) / monomer, IL / polymer and IL / nanoparticle mixtures is critical for the use of ILs as green solvents in polymerization processes, and to rationalize recent observations concerning the superior solubility of some proteins in ILs when compared to standard solvents. In this work, the most relevant results obtained in terms of a three-component Flory-Huggins theory concerning the “Extra Solvent Power, ESP” of ILs when compared to traditional non-ionic solvents for monomeric solutes (case I), linear polymers (case II) and globular nanoparticles (case III) are presented. Moreover, useful ESP maps are drawn for the first time for IL mixtures corresponding to case I, II and III. Finally, a potential pathway to improve the miscibility of non-ionic polymers in ILs is also proposed.

Sign in / Sign up

Export Citation Format

Share Document