scholarly journals Comparison of water vapor measurements by airborne Sun photometer and near-coincident in situ and satellite sensors during INTEX/ITCT 2004

2007 ◽  
Vol 112 (D12) ◽  
Author(s):  
J. Livingston ◽  
B. Schmid ◽  
J. Redemann ◽  
P. B. Russell ◽  
S. A. Ramirez ◽  
...  
2008 ◽  
Vol 25 (10) ◽  
pp. 1733-1743 ◽  
Author(s):  
J. M. Livingston ◽  
B. Schmid ◽  
P. B. Russell ◽  
J. R. Podolske ◽  
J. Redemann ◽  
...  

Abstract In January–February 2003, the 14-channel NASA Ames airborne tracking sun photometer (AATS) and the NASA Langley/Ames diode laser hygrometer (DLH) were flown on the NASA DC-8 aircraft. The AATS measured column water vapor on the aircraft-to-sun path, while the DLH measured local water vapor in the free stream between the aircraft fuselage and an outboard engine cowling. The AATS and DLH measurements have been compared for two DC-8 vertical profiles by differentiating the AATS column measurement and/or integrating the DLH local measurement over the altitude range of each profile (7.7–10 km and 1.1–12.5 km). These comparisons extend, for the first time, tests of AATS water vapor retrievals to altitudes >∼6 km and column contents <0.1 g cm−2. To the authors’ knowledge, this is the first time suborbital spectroscopic water vapor measurements using the 940-nm band have been tested in conditions so high and dry. Values of layer water vapor (LWV) calculated from the AATS and DLH measurements are highly correlated for each profile. The composite dataset yields r 2 0.998, rms difference 7.7%, and bias (AATS minus DLH) 1.0%. For water vapor densities AATS and DLH had r 2 0.968, rms difference 27.6%, and bias (AATS minus DLH) −4.2%. These results for water vapor density compare favorably with previous comparisons of AATS water vapor to in situ results for altitudes <∼6 km, columns ∼0.1 to 5 g cm−2, and densities ∼0.1 to 17 g m−3.


2021 ◽  
Vol 27 (S1) ◽  
pp. 2102-2103
Author(s):  
Boyi Qu ◽  
Klaus van Benthem

2020 ◽  
Vol 12 (17) ◽  
pp. 2861
Author(s):  
Jifu Yin ◽  
Xiwu Zhan ◽  
Jicheng Liu

Soil moisture plays a vital role for the understanding of hydrological, meteorological, and climatological land surface processes. To meet the need of real time global soil moisture datasets, a Soil Moisture Operational Product System (SMOPS) has been developed at National Oceanic and Atmospheric Administration to produce a one-stop shop for soil moisture observations from all available satellite sensors. What makes the SMOPS unique is its near real time global blended soil moisture product. Since the first version SMOPS publicly released in 2010, the SMOPS has been updated twice based on the users’ feedbacks through improving retrieval algorithms and including observations from new satellite sensors. The version 3.0 SMOPS has been operationally released since 2017. Significant differences in climatological averages lead to remarkable distinctions in data quality between the newest and the older versions of SMOPS blended soil moisture products. This study reveals that the SMOPS version 3.0 has overwhelming advantages of reduced data uncertainties and increased correlations with respect to the quality controlled in situ measurements. The new version SMOPS also presents more robust agreements with the European Space Agency’s Climate Change Initiative (ESA_CCI) soil moisture datasets. With the higher accuracy, the blended data product from the new version SMOPS is expected to benefit the hydrological, meteorological, and climatological researches, as well as numerical weather, climate, and water prediction operations.


2011 ◽  
Vol 344 (1-2) ◽  
pp. 111-121 ◽  
Author(s):  
Zeinhom M. El-Bahy ◽  
Ahmed I. Hanafy ◽  
Mohamed M. Ibrahim ◽  
Masakazu Anpo

2018 ◽  
Vol 116 ◽  
pp. 57-61 ◽  
Author(s):  
Yao Shi ◽  
Pei Zhang ◽  
Tuotuo Fang ◽  
Erhao Gao ◽  
Fujuan Xi ◽  
...  

2019 ◽  
Vol 7 (4) ◽  
pp. 879-886 ◽  
Author(s):  
Chuanfei Wang ◽  
Shaofei Ni ◽  
Slawomir Braun ◽  
Mats Fahlman ◽  
Xianjie Liu

Tolerance of non-fullerene acceptors to water vapor, oxygen and thermal stress was investigated by photoelectron spectroscopy via the in situ method.


Author(s):  
Le Zhang ◽  
Jia-Lin Wu ◽  
Yanqiang Zhang ◽  
Ya-Nan Yang ◽  
Pengli He ◽  
...  

Titanite is a widespread accessory nesosilicate with high trace-element contents including rare-earth elements, Th, and U, and is thus suitable for in situ isotopic and trace-element analyses and U–Pb dating....


2021 ◽  
Author(s):  
Enrico Dammers ◽  
Mark Shephard ◽  
Evan White ◽  
Debora Griffin ◽  
Evan Chow ◽  
...  

<p>While ammonia (NH3) at its current levels is known to be a hazard to environmental and human health, the atmospheric budget is still quite uncertain. This can largely be attributed to the short lifetime of ammonia in combination with an overall lack of (dense) in-situ measurement networks. The capability to observe ammonia distributions with satellites has opened new ways to study the atmospheric ammonia budget. Previous studies have demonstrated the capability of current ammonia satellite sensors to resolve emissions from point like sources, biomass burning, and constraining emission sources at a regional level with methods involving the use of air quality models.</p><p>In this study, we present the first spatially resolved ammonia emission estimates across the globe using a consistent methodology based solely on ammonia satellite observations from the Cross-track Infrared Sounder (CrIS) instrument and ECMWF ERA5 wind fields. The concept was evaluated for North Western Europe and demonstrated the ability to constrain annual emissions at county- to provincial-levels with most deviations within the bounds found in the error analysis. Furthermore, we show that for some regions the spatial patterns found in the satellite observations are consistent while others do not match the current inventories. Finally, the results indicate that the absolute emission levels tend to be underestimated for parts of the globe.</p>


2021 ◽  
Author(s):  
Susan Kizer ◽  
David Flittner ◽  
Marilee Roell ◽  
Robert Damadeo ◽  
Carrie Roller ◽  
...  

<p>The Stratospheric Aerosol and Gas Experiment III (SAGE III) instrument installed on the International Space Station (ISS) has completed over three and a half years of data collection and production of science data products. The SAGE III/ISS is a solar and lunar occultation instrument that scans the light from the Sun and Moon through the limb of the Earth’s atmosphere to produce vertical profiles of aerosol, ozone, water vapor, and other trace gases. It continues the legacy of previous SAGE instruments dating back to the 1970s to provide data continuity of stratospheric constituents critical for assessing trends in the ozone layer. This presentation shows the validation results of comparing SAGE III/ISS ozone and water vapor vertical profiles from the newly released v5.2 science product with those of in situ and satellite data .</p>


Sign in / Sign up

Export Citation Format

Share Document