scholarly journals Effects of ultrasonication time on stability, dynamic viscosity, and pumping power management of MWCNT-water nanofluid: an experimental study

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Amin Asadi ◽  
Ibrahim M. Alarifi
Keyword(s):  
Thermophysical Properties ◽  
Dynamic Viscosity ◽  
Probe Type ◽  
Pumping Power ◽  
Step Method ◽  
Maximum Increase ◽  
Multi Walled Carbon Nanotubes ◽  
Ultrasonication Time ◽  
The Stability ◽  
Walled Carbon Nanotubes

Abstract It is known that ultrasonication has a certain effect on thermophysical properties and heat transfer of nanofluids. The present study is the continuation of the authors’ previous research on the effects of ultrasonication on the thermophysical properties of Multi-Walled Carbon Nanotubes (MWCNTs)-water nanofluid. Investigating the effects of ultrasonication time on samples’ stability, rheological properties, and pumping power of a water-based nanofluid containing MWCNTs nanoparticle is the main objective of the present study. The two-step method has been employed to prepared the samples. Moreover, a probe-type ultrasonic device has been used, and different ultrasonication times have been applied. The samples’ stability is investigated in different periods. The results revealed that prolonging the ultrasonication time to 60 min leads to improving the samples’ stability while prolonging ultrasonication time to higher than 60 min resulted in deteriorating the stability. As for dynamic viscosity, it is observed that increasing ultrasonication time to 60 min leads to decreasing the dynamic viscosity of the samples. As for pumping power, it is observed that the maximum increase in fanning friction factor ratio is less than 3%, which shows that adding MWCNTs to water does not impose a considerable penalty in the required energy for pumping power.

scholarly journals Effect of Multi-Walled Carbon Nanotubes-Based Nanofluids on Marine Gas Turbine Intercooler Performance

Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2300
Author(s):  
Salah Almurtaji ◽  
Naser Ali ◽  
Joao A. Teixeira ◽  
Abdulmajid Addali
Keyword(s):  
Carbon Nanotubes ◽  
Gas Turbine ◽  
Thermophysical Properties ◽  
Outlet Temperature ◽  
Gas Temperature ◽  
Pumping Power ◽  
Turbine Engine ◽  
Compressed Gas ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Coolants play a major role in the performance of heat exchanging systems. In a marine gas turbine engine, an intercooler is used to reduce the compressed gas temperature between the compressor stages. The thermophysical properties of the coolant running within the intercooler directly influence the level of enhancement in the performance of the unit. Therefore, employing working fluids of exceptional thermal properties is beneficial for improving performance in such applications, compared to conventional fluids. This paper investigates the effect of utilizing nanofluids for enhancing the performance of a marine gas turbine intercooler. Multi-walled carbon nanotubes (MWCNTs)-water with nanofluids at 0.01–0.10 vol % concentration were produced using a two-step controlled-temperature approach ranging from 10 °C to 50 °C. Next, the thermophysical properties of the as-prepared suspensions, such as density, thermal conductivity, specific heat capacity, and viscosity, were characterized. The intercooler performance was then determined by employing the measured data of the MWCNTs-based nanofluids thermophysical properties in theoretical formulae. This includes determining the intercooler effectiveness, heat transfer rate, gas outlet temperature, coolant outlet temperature, and pumping power. Finally, a comparison between a copper-based nanofluid from the literature with the as-prepared MWCNTs-based nanofluid was performed to determine the influence of each of these suspensions on the intercooler performance.

scholarly journals Thermophysical Properties of Nanofluids Composed of Ethylene Glycol and Long Multi-Walled Carbon Nanotubes

Fluids ◽  
2020 ◽  
Vol 5 (4) ◽  
pp. 241
Author(s):  
Karolina Brzóska ◽  
Bertrand Jóźwiak ◽  
Adrian Golba ◽  
Marzena Dzida ◽  
Sławomir Boncel
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Ethylene Glycol ◽  
Chemical Vapor ◽  
Step Method ◽  
Mwcnt Content ◽  
Multi Walled Carbon Nanotubes ◽  
The Stability ◽  
Walled Carbon Nanotubes ◽  
Rotary Viscometer

In this work, thermal conductivity, viscosity, isobaric heat capacity, and density of stable carbon-based nanofluids are presented. The nanofluids under study are composed of 1,2-ethanediol (ethylene glycol, EG) and long multi-walled carbon nanotubes (MWCNTs), so-called ‘in-house 16h’ (synthesized in our laboratory via catalytic chemical vapor deposition during 16 h with a diameter of 60–80 nm and length of 770 μm). Poly(N-vinylpyrrolidone) (PVP) was used to increase the stability of nanofluids. The nanofluids were prepared via an ultrasonication-assisted, three-step method while their key thermophysical characteristics were obtained using the hot-wire technique and rotary viscometer. As a result, the addition of MWCNTs significantly improved the thermal conductivity of nanofluids by 31.5% for the highest 1.0 wt% (0.498 vol%) long MWCNT content, leaving the Newtonian character of the nanofluids practically intact.

scholarly journals Stabilizing effect of methylcellulose on the dispersion of multi-walled carbon nanotubes in cementitious composites

2020 ◽  
Vol 9 (1) ◽  
pp. 93-104
Author(s):  
Mingrui Du ◽  
Yuan Gao ◽  
Guansheng Han ◽  
Luan Li ◽  
Hongwen Jing
Keyword(s):  
Carbon Nanotubes ◽  
Pore Solution ◽  
Cementitious Materials ◽  
High Ionic Strength ◽  
Cementitious Composites ◽  
Uniform Distributions ◽  
Stabilizing Effect ◽  
Multi Walled Carbon Nanotubes ◽  
The Stability ◽  
Walled Carbon Nanotubes

AbstractMulti-walled carbon nanotubes (MWCNTs) have been added in the plain cementitious materials to manufacture composites with the higher mechanical properties and smart behavior. The uniform distributions of MWCNTs is critical to obtain the desired enhancing effect, which, however, is challenged by the high ionic strength of the cement pore solution. Here, the effects of methylcellulose (MC) on stabilizing the dispersion of MWCNTs in the simulated cement pore solution and the viscosity of MWCNT suspensions werestudied. Further observations on the distributions of MWCNTs in the ternary cementitious composites were conducted. The results showed that MC forms a membranous envelope surrounding MWCNTs, which inhibits the adsorption of cations and maintains the steric repulsion between MWCNTs; thus, the stability of MWCNT dispersion in cement-based composites is improved. MC can also work as a viscosity adjuster that retards the Brownian mobility of MWCNTs, reducing their re-agglomerate within a period. MC with an addition ratio of 0.018 wt.% is suggested to achieve the optimum dispersion stabilizing effect. The findings here provide a way for stabilizing the other dispersed nano-additives in the cementitious composites.

Two-step synthesis of polyurethane/multi-walled carbon nanotubes polymer composite to achieve high percentage particle reinforcement for mechanical applications

2021 ◽  
pp. 002199832199945
Author(s):  
Dinesh Kumar ◽  
Suneev Anil Bansal ◽  
Navin Kumar ◽  
Prashant Jindal
Keyword(s):  
Carbon Nanotubes ◽  
Synthesis Method ◽  
Step Method ◽  
Molding Method ◽  
Uniform Dispersion ◽  
Noticeable Improvement ◽  
Multi Walled Carbon Nanotubes ◽  
Mixing Method ◽  
Compressive Testing ◽  
Walled Carbon Nanotubes

The present work has been aimed to synthesize Polyurethane (PU)/Multi-Walled Carbon Nanotubes (MWCNTs) composite using a two-step method to enhance mechanical properties. In the first step, films (0.2 mm thickness) have been synthesized using a solution mixing method to disperse MWCNTs in the PU matrix. In the second step, thin films of uniformly dispersed MWCNTs in the PU matrix have been compression molded to synthesize PU/MWCNTs composite required for real mechanical applications. The two-step method has the advantages of solution mixing as well as compression molding method. The results of quasi-static nanoindentation tests indicated that in comparison to pure PU, elastic modulus and hardness have been enhanced by 124% and 53% respectively for 10 wt% PU/MWCNTs composite. Fracture resistance of PU/MWCNTs composites, with 7 wt% of MWCNTs, has been enhanced by 52% as compared to pure PU. To understand bulk behavior, nanoindentation results have been cross-verified with compression testing. Results of compressive testing shown that the modulus of composite material has been significantly improved under the influence of the increasing composition of MWCNTs. A noticeable improvement of 52% has been observed in compressive modulus of 10 wt% composite in equivalence to pure PU. The overall improvement in mechanical behavior has been attributed to the uniform dispersion of MWCNTs in the PU matrix by the two-step synthesis method.

Thermal Conductivity Measurement for Carbon-Nanotube Suspensions with 3ω Method

2009 ◽  
Vol 60-61 ◽  
pp. 394-398 ◽  
Author(s):  
Gen Sheng Wu ◽  
Jue Kuan Yang ◽  
Shu Lin Ge ◽  
Yu Juan Wang ◽  
Min Hua Chen ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Carbon Nanotubes ◽  
Volume Fraction ◽  
Aqueous Suspension ◽  
Conductivity Measurement ◽  
3Ω Method ◽  
Conductivity Enhancement ◽  
Multi Walled Carbon Nanotubes ◽  
The Stability ◽  
Walled Carbon Nanotubes

The stable and homogeneneous aqueous suspension of carbon nanotubes was prepared in this study. The stability of the nanofluids was improved greatly due to the use of a new dispersant, humic acid. The thermal conductivity of the aqueous suspension was measured with the 3ω method. The experimental results showed that the thermal conductivity of the suspensions increases with the temperature and also is nearly proportional to the loading of the nanoparticles. The thermal conductivity enhancement of single-walled carbon nanotubes (SWNTs) suspensions is better than that of the multi-walled carbon nanotubes (MWNTs) suspensions. Especially for a volume fraction of 0.3846% SWNTs, the thermal conductivity is enhanced by 40.5%. Furthermore, the results at 30°C match well with Jang and Choi’s model.

Noncovalent functionalization of hole-transport materials with multi-walled carbon nanotubes for stable inverted perovskite solar cells

2019 ◽  
Vol 7 (45) ◽  
pp. 14306-14313 ◽  
Author(s):  
Yu Lu ◽  
Xueping Zong ◽  
Yilei Wang ◽  
Wenhua Zhang ◽  
Quanping Wu ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Solar Cells ◽  
Perovskite Solar Cells ◽  
Hole Transport ◽  
Promising Strategy ◽  
Noncovalent Functionalization ◽  
Multi Walled Carbon Nanotubes ◽  
The Stability ◽  
Walled Carbon Nanotubes

A new promising strategy to improve the stability of inverted perovskite solar cells is reported.

Variational Principles for the Stability Analysis of Multi-Walled Carbon Nanotubes Based on a Nonlocal Elastic Shell Model

2010 ◽  
Author(s):  
Mohsen Asghari ◽  
Jacob Rafati
Keyword(s):  
Carbon Nanotubes ◽  
Stability Analysis ◽  
Inverse Method ◽  
Variational Principles ◽  
Elastic Shell ◽  
Multi Walled Carbon Nanotubes ◽  
Natural Boundary Conditions ◽  
The Stability ◽  
Walled Carbon Nanotubes ◽  
Continuum Theories

The nonlocal continuum theories are capable to reflect the small length characteristic of nanostructures. In this work, variational principles are presented for the stability analysis of multi-walled carbon nanotubes under various mechanical loadings based on the nonlocal elastic Donnell’s shell by the semi-inverse method. In this manner, a set of proper essential and natural boundary conditions for each layer of the multi-walled nanotube is derived.

Sign in / Sign up

Export Citation Format

Share Document