scholarly journals Mathematical modeling and thermodynamics of Prandtl–Eyring fluid with radiation effect: a numerical approach

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zakir Ullah ◽  
Ikram Ullah ◽  
Gul Zaman ◽  
Hamda Khan ◽  
Taseer Muhammad
Keyword(s):  
Differential Equations ◽  
Skin Friction ◽  
Fluid Velocity ◽  
Convective Boundary Condition ◽  
Numerical Approach ◽  
Temperature Fields ◽  
Main Concern ◽  
Fluid Temperature ◽  
Convective Boundary ◽  
Linear Ordinary Differential Equations

AbstractMain concern of current research is to develop a novel mathematical model for stagnation-point flow of magnetohydrodynamic (MHD) Prandtl–Eyring fluid over a stretchable cylinder. The thermal radiation and convective boundary condition are also incorporated. The modeled partial differential equations (PDEs) with associative boundary conditions are deduced into coupled non-linear ordinary differential equations (ODEs) by utilizing proper similarity transformations. The deduced dimensionless set of ODEs are solved numerically via shooting method. Behavior of controlling parameters on the fluid velocity, temperature fields as well as skin friction and Nusselt number are highlighted through graphs. Outcome declared that dimensionless fluid temperature boosts up for both the radiation parameter and Biot number. It is also revealed that the magnitude of both heat transfer rate and skin friction enhance for higher estimation of curvature parameter. Furthermore, comparative analysis between present and previous reports are provided for some specific cases to verify the obtained results.

Slip flow over a non-Newtonian fluid through a Darcy–Forchheimer medium: Numerical approach

2019 ◽  
Vol 33 (35) ◽  
pp. 1950448
Author(s):  
K. Ganesh Kumar ◽  
M. N. Khan ◽  
M. Osman ◽  
Abdulaziz R. Alharbi ◽  
Mohammad Rahimi-Gorji ◽  
...  
Keyword(s):  
Differential Equations ◽  
Nonlinear Partial Differential Equations ◽  
Slip Flow ◽  
Convective Boundary Condition ◽  
Numerical Approach ◽  
Skin Friction Coefficient ◽  
Convective Boundary ◽  
Nusselt Numbers ◽  
Similarity Transformations ◽  
Liquid Suspension

This work focused on slip flow over a non-Newtonian nanofluid fluid flow past a stretching sheet with particles–liquid suspension. The convective boundary condition is taken into account. Similarity transformations are utilized to reduce the nonlinear partial differential equations into a set of nonlinear ordinary differential equations. Runge–Kutta–Fehlberg scheme is used to get the numerical solution. Important parameters are analyzed through graphs and skin friction coefficient. Nusselt numbers are presented in tables. Investigation reveals that slip parameter decreases the velocity field and Biot number increases the temperature field.

Entropy generation analysis in flow of thixotropic nanofluid

2019 ◽  
Vol 29 (12) ◽  
pp. 4507-4530 ◽  
Author(s):  
Muhammad Ijaz Khan ◽  
Salman Ahmad ◽  
Tasawar Hayat ◽  
M. Waleed Ahmad Khan ◽  
Ahmed Alsaedi
Keyword(s):  
Friction Coefficient ◽  
Differential Equations ◽  
Skin Friction ◽  
Entropy Generation ◽  
Hartmann Number ◽  
Convective Boundary Condition ◽  
Skin Friction Coefficient ◽  
Convective Boundary ◽  
Content Type ◽  
Flow Variables

Purpose The purpose of this paper is to address entropy generation in flow of thixotropic nonlinear radiative nanoliquid over a variable stretching surface with impacts of inclined magnetic field, Joule heating, viscous dissipation, heat source/sink and chemical reaction. Characteristics of nanofluid are described by Brownian motion and thermophoresis effect. At surface of the sheet zero mass flux and convective boundary condition are considered. Design/methodology/approach Considered flow problem is mathematically modeled and the governing system of partial differential equations is transformed into ordinary ones by using suitable transformation. The transformed ordinary differential equations system is figure out by homotopy algorithm. Outcomes of pertinent flow variables on entropy generation, skin friction, concentration, temperature, velocity, Bejan, Sherwood and Nusselts numbers are examined in graphs. Major outcomes are concluded in final section. Findings Velocity profile increased versus higher estimation of material and wall thickness parameter while it decays through larger Hartmann number. Furthermore, skin friction coefficient upsurges subject to higher values of Hartmann number and magnitude of skin friction coefficient decays via materials parameters. Thermal field is an increasing function of Hartmann number, radiation parameter, thermophoresis parameter and Eckert number. Originality/value The authors have discussed entropy generation in flow of thixotropic nanofluid over a variable thicked surface. No such consideration is yet published in the literature.

Radiative Flow of Jeffrey Fluid Through a Convectively Heated Stretching Cylinder

2014 ◽  
Vol 31 (1) ◽  
pp. 69-78 ◽  
Author(s):  
T. Hayat ◽  
S. Asad ◽  
A. Alsaedi ◽  
F. E. Alsaadi
Keyword(s):  
Differential Equations ◽  
Nonlinear Partial Differential Equations ◽  
Convective Boundary Condition ◽  
Deborah Number ◽  
Temperature Fields ◽  
Jeffrey Fluid ◽  
Physical Parameters ◽  
Stretching Cylinder ◽  
Series Solutions ◽  
Convective Boundary

AbstractTwo-dimensional flow of Jeffrey fluid by an inclined stretching cylinder with convective boundary condition is studied. In addition the combined effects of thermal radiation and viscous dissipation are taken into consideration. The developed nonlinear partial differential equations are reduced into the ordinary differential equations by suitable transformations. The governing equations are solved for the series solutions. The convergence of the series solutions for velocity and temperature fields is carefully analyzed. The effects of various physical parameters such as ratio of relaxation to retardation times, Deborah number, radiation parameter, Biot number, curvature parameter, local Grashof number, Prandtl number, Eckert number and angle of inclination are examined through graphical and numerical results of the velocity and temperature distributions.

scholarly journals Effect of Thermal Radiation on Magneto-Convection of a Micropolar Nanoliquid towards a Non-Linear Stretching Surface with Convective Boundary

2018 ◽  
Vol 7 (4.10) ◽  
pp. 417
Author(s):  
K. Jagan ◽  
S. Sivasankaran ◽  
M. Bhuvaneswari ◽  
S. Rajan
Keyword(s):  
Differential Equations ◽  
Thermal Radiation ◽  
Ordinary Differential Equations ◽  
Convective Boundary Condition ◽  
Convection Flow ◽  
Stretching Surface ◽  
Convective Boundary ◽  
Linear Ordinary Differential Equations ◽  
Boundary Parameter ◽  
Non Linear

The objective of this paper is to analyze the effect of thermal radiation on MHD mixed convection flow of a micropolar nanoliquid   towards a non-linear stretching surface with convective boundary condition. The governing equations are converted into non-linear    ordinary differential equations by using suitable similarity transformations. The homotopy analysis method is used for solving the non-linear ordinary differential equations. The temperature profiles increase due to increase in thermal radiation parameter. The microrotation   profile increases when boundary parameter is increased. Also, the skin friction coefficient and local Nusselt are plotted for various    parameters.  

Viscous dissipation effect on steady natural convection Couette flow with convective boundary condition

2022 ◽  
Vol 0 (0) ◽  
Author(s):  
Abiodun O. Ajibade ◽  
Tafida M. Kabir
Keyword(s):  
Boundary Condition ◽  
Natural Convection ◽  
Couette Flow ◽  
Viscous Dissipation ◽  
Fluid Velocity ◽  
Convective Boundary Condition ◽  
Heated Plate ◽  
Fluid Temperature ◽  
Convective Boundary ◽  
Energy And Momentum

Abstract The present article explores the effect of viscous dissipation on steady natural convection Couette flow subject to convective boundary condition. Due to the nonlinearity and coupling of the governing equations in the present situation, the homotopy perturbation method was employed to obtain the solutions of the energy and momentum equations. The impacts of the controlling parameters were investigated and discussed graphically. In the course of investigation, it was found that fluid temperature increases with an increase in viscous dissipation while the reverse trend was observed in fluid velocity. However, it was also discovered that heat generation leads to a decrease in the rate of heat transfer on the heated plate and it increases on the cold plate. Finally, it was concluded that the velocity boundary layer thickness increases with an increase in Biot number.

scholarly journals DTM-PADE APPROACH TO MHD SLIP FLOW AND HEAT TRANSFER OVER A RADIALLY STRETCHING SHEET WITH THERMAL RADIATION

2020 ◽  
Vol 50 (3) ◽  
pp. 175-184
Author(s):  
Shoeb Rashid Sayyed ◽  
Brijbhan Singh ◽  
Oluwole Makinde ◽  
Nasreen Bano Muslim Shaikh
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Thermal Radiation ◽  
Fluid Velocity ◽  
Slip Flow ◽  
Fluid Temperature ◽  
Linear Ordinary Differential Equations ◽  
Flow And Heat Transfer ◽  
Non Linear

The present paper deals with the boundary layer flow and heat transfer of an electrically conducting magnetohydrodynamic viscous fluid over a radially stretching power-law sheet with suction/injection within a porous medium by considering the effects of momentum and thermal slips and thermal radiation. The governing non-linear partial boundary layer differential equations are reduced to a  system of coupled non-linear ordinary differential equations (ODEs) with the aid of appropriate similarity transformations. These transformed ODEs are then solved by employing a semi-analytic technique known as differential transformation method (DTM) in combination with Pade approximation. The numerical values of skin friction and local Nusselt number are tabulated and validated by comparing them with the corresponding values available in the literature. Our results have been found in precise agreement  with the results published earlier. The effects of different governing parameters on velocity and temperature distributions are analyzed graphically. It has been found that with an increase in the velocity slip parameter the fluid velocity decreases whereas the temperature of the fluid increases. Also, the fluid temperature gets enhanced with an increase in the radiation parameter, but it decreases with an increase in thermal slip.

scholarly journals Flow and Heat Transfer of MHD Dusty Nanofluid Toward Moving Plate with Convective Boundary Condition

2021 ◽  
Vol 89 (2) ◽  
pp. 43-55
Author(s):  
Euwing Low ◽  
Syahira Mansur ◽  
Yaan Yee Choy ◽  
Eugene Low
Keyword(s):  
Heat Transfer ◽  
Boundary Condition ◽  
Differential Equations ◽  
Volume Fraction ◽  
Particle Interaction ◽  
Convective Boundary Condition ◽  
Moving Plate ◽  
Convective Boundary ◽  
Linear Ordinary Differential Equations ◽  
Flow And Heat Transfer

This paper considers the flow and heat transfer characteristics of dusty nanofluid over a moving plate in the presence of magnetohydrodynamic (MHD) with convective boundary condition. Two types of nanofluid namely CuO-water and Al2O3-water permeated with dust particles are considered. The governing partial differential equations are converted into a system of non-linear ordinary differential equations using similarity transformation, then the non-linear ordinary differential equations are solved using shooting method with fourth-fifth order Runge-Kutta Fehlberg method (RKF45). The influence of non-dimensional governing parameters such as velocity ratio parameter, magnetic field parameter, volume fraction of the nanoparticle, volume fraction of the dust particle, mass concentration of the dust particle, fluid particle interaction parameter for velocity, fluid particle interaction parameter for temperature and Biot number on the velocity and temperature profiles for fluid and dust phases of CuO-water and Al2O3-water dusty nanofluids are discussed and presented through graphs. The skin friction coefficient and Nusselt number are discussed and presented in tabular form.

Magnetohydrodynamic Mixed Convective Flow Due to a Vertical Plate With Induced Magnetic Field

2018 ◽  
Vol 10 (6) ◽  
Author(s):  
R. Nandkeolyar ◽  
M. Narayana ◽  
S. S. Motsa ◽  
P. Sibanda
Keyword(s):  
Magnetic Field ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Fluid Velocity ◽  
Nonlinear Partial Differential Equations ◽  
Linearization Method ◽  
Fluid Temperature ◽  
Magnetic Field Effects ◽  
Induced Magnetic Field ◽  
Partial Differential

The steady hydromagnetic flow of a viscous, incompressible, perfectly conducting, and heat absorbing fluid past a vertical flat plate under the influence of an aligned magnetic field is studied. The flow is subject to mixed convective heat transfer. The fluid is assumed to have a reasonably high magnetic Prandtl number which causes significant-induced magnetic field effects. Such fluid flows find application in many magnetohydrodynamic devices including MHD power-generation. The effects of viscous dissipation and heat absorption by the fluid are investigated. The governing nonlinear partial differential equations are converted into a set of nonsimilar partial differential equations which are then solved using a spectral quasi-linearization method (SQLM). The effects of the important parameters on the fluid velocity, induced magnetic field, fluid temperature and as well as on the coefficient of skin-friction and the Nusselt number are discussed qualitatively.

Entropy Generation on Maxwell Fluid Flow Past an Inclined Stretching Plate with Slip and Convective Surface Conditon: Darcy-Forchheimer Model

2019 ◽  
Vol 26 ◽  
pp. 62-83
Author(s):  
Tunde Abdulkadir Yusuf ◽  
Jacob Abiodun Gbadeyan
Keyword(s):  
Porous Medium ◽  
Differential Equations ◽  
Entropy Generation ◽  
Mhd Flow ◽  
Maxwell Fluid ◽  
Entropy Generation Rate ◽  
Physical Parameters ◽  
Convective Boundary ◽  
Linear Ordinary Differential Equations ◽  
Non Linear

In this study the effect of entropy generation on two dimensional magnetohydrodynamic (MHD) flow of a Maxwell fluid over an inclined stretching sheet embedded in a non-Darcian porous medium with velocity slip and convective boundary condition is investigated. Darcy-Forchheimer based model was employed to describe the flow in the porous medium. The non-linear thermal radiation is also taken into account. Similarity transformation is used to convert the non-linear partial differential equations to a system of non-linear ordinary differential equations. The resulting transformed equations are then solved using the Homotopy analysis method (HAM). Influence of various physical parameters on the dimensionless velocity profile, temperature profile and entropy generation are shown graphically and discussed in detail while the effects of these physical parameters on velocity gradient and temperature gradient are aided with the help of Table. Furthermore, comparison of some limiting cases of this model was made with existing results. The results obtained are found to be in good agreement with previously published results. Moreover, increase in local inertial coefficient parameter is found to decrease the entropy generation rate.

scholarly journals Finite Element Simulation of Multi-Slip Effects on Unsteady MHD Bioconvective Micropolar Nanofluid Flow Over a Sheet with Solutal and Thermal Convective Boundary Conditions

Coatings ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 842 ◽  
Author(s):  
Liaqat Ali ◽  
Xiaomin Liu ◽  
Bagh Ali ◽  
Saima Mujeed ◽  
Sohaib Abdal
Keyword(s):  
Finite Element ◽  
Differential Equations ◽  
Boundary Conditions ◽  
Fluid Velocity ◽  
Mesh Size ◽  
Skin Friction Coefficient ◽  
Convective Boundary ◽  
Micropolar Nanofluid ◽  
Layer Flow ◽  
Buoyancy Ratio

In this article, the intention is to explore the flow of a magneto-hydrodynamic (MHD) bioconvective micro-polar Nanofluid restraining microorganism. The numerical solution of 2-D laminar bioconvective boundary layer flow of micro-polar nanofluids are presented. The phenomena of multi-slip, convective thermal and Solutal boundary conditions have been integrated. A system of non-linear partial differential equations are transformed into the system of coupled nonlinear ordinary differential equations by applying appropriate transformations, the transformed equations are then solved by applying the variational finite element method (FEM). The fascinating features of assorted velocity parameter, microrotation, temperature, microorganism compactness, solutal and nanoparticles concentration have been inspected. The rate of heat transfer, the skin friction coefficient, couple stress and Sherwood number for microorganisms have also been discussed graphically and numerically. The investigations illustrated that increase in material parameters causes a reduction in microorganism compactness, concentration and temperature. As a result of enhancement in the unsteadiness parameter, the fluid velocity, concentration of microorganisms and the temperature are observed to be declines. Energy and microorganism compactness profile affected by the improvement in the buoyancy ratio parameter. As the improvement in results of buoyancy ratio parameter effects on improvement in the energy and the microorganism compactness profile while the velocity profile is condensed. In the end, rationalized convergence of the finite element solution has been inspected; the computations are found out via depreciating the mesh size.

Sign in / Sign up

Export Citation Format

Share Document