scholarly journals Electrically turning periodic structures in cholesteric layer with conical–planar boundary conditions

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Oxana Prishchepa ◽  
Mikhail Krakhalev ◽  
Vladimir Rudyak ◽  
Vitaly Sutormin ◽  
Victor Zyryanov
Keyword(s):  
Boundary Conditions ◽  
Periodic Structures ◽  
Cholesteric Liquid Crystal ◽  
Growth Direction ◽  
Smooth Transition ◽  
Defect Structures ◽  
Optical Cell ◽  
Elastic Continuum ◽  
The One ◽  
Experimental Findings

AbstractElectro-optical cell based on the cholesteric liquid crystal is studied with unique combination of the boundary conditions: conical anchoring on the one substrate and planar anchoring on another one. Periodic structures in cholesteric layer and their transformation under applied electric field are considered by polarizing optical microscopy, the experimental findings are supported by the data of the calculations performed using the extended Frank elastic continuum approach. Such structures are the set of alternating over- and under-twisted defect lines whose azimuthal director angles differ by $$180^\circ$$ 180 ∘ . The $$U^+$$ U + and $$U^-$$ U - -defects of periodicity, which are the smooth transition between the defect lines, are observed at the edge of electrode area. The growth direction of defect lines forming a diffraction grating can be controlled by applying a voltage in the range of $$0\le \, V \le 1.3$$ 0 ≤ V ≤ 1.3  V during the process. Resulting orientation and distance between the lines don’t change under voltage. However, at $$V>1.3$$ V > 1.3  V $$U^+$$ U + -defects move along the defect lines away from the electrode edges, and, finally, the grating lines collapse at the cell’s center. These results open a way for the use of such cholesteric material in applications with periodic defect structures where a periodicity, orientation, and configuration of defects should be adjusted.

scholarly journals Nematic and Cholesteric Liquid Crystal Structures in Cells with Tangential-Conical Boundary Conditions

Crystals ◽  
2019 ◽  
Vol 9 (5) ◽  
pp. 249 ◽  
Author(s):  
Mikhail N. Krakhalev ◽  
Rashid G. Bikbaev ◽  
Vitaly S. Sutormin ◽  
Ivan V. Timofeev ◽  
Victor Ya. Zyryanov
Keyword(s):  
Boundary Conditions ◽  
Energy Minimization ◽  
Periodic Structures ◽  
Cholesteric Liquid Crystal ◽  
Topological Defects ◽  
Director Field ◽  
Surface Anchoring ◽  
Minimization Procedure ◽  
Optical Textures ◽  
Difference Time

Orientational structures formed in nematic and cholesteric layers with tangential-conical boundary conditions have been investigated. LC cells with one substrate specifying the conical surface anchoring and another substrate specifying the tangential one have been considered. The director configurations and topological defects have been identified analyzing the texture patterns obtained by polarizing microscope in comparison with the structures and optical textures calculated by free energy minimization procedure of director field and finite-difference time-domain method, respectively. The domains, periodic structures and two-dimensional defects proper to the LC cells with tangential-conical anchoring have been studied depending on the layer thickness and cholesteric pitch.

scholarly journals An Inverse Source Problem for the Generalized Subdiffusion Equation with Nonclassical Boundary Conditions

2021 ◽  
Vol 5 (3) ◽  
pp. 63
Author(s):  
Emilia Bazhlekova
Keyword(s):  
Boundary Conditions ◽  
Initial Boundary ◽  
Initial Boundary Value Problem ◽  
Stability Estimates ◽  
Inverse Source Problem ◽  
Time Data ◽  
Final Time ◽  
Generalized Eigenfunction ◽  
The One ◽  
Initial Boundary Value

An initial-boundary-value problem is considered for the one-dimensional diffusion equation with a general convolutional derivative in time and nonclassical boundary conditions. We are concerned with the inverse source problem of recovery of a space-dependent source term from given final time data. Generalized eigenfunction expansions are used with respect to a biorthogonal pair of bases. Existence, uniqueness and stability estimates in Sobolev spaces are established.

Initial-boundary value problems for the one-dimensional linear advection–dispersion equation with decay

2020 ◽  
Vol 75 (8) ◽  
pp. 713-725 ◽  
Author(s):  
Guenbo Hwang
Keyword(s):  
Boundary Conditions ◽  
Dirichlet Boundary ◽  
Boundary Value ◽  
Initial Boundary ◽  
Initial Boundary Value Problems ◽  
One Dimensional ◽  
Advection Dispersion ◽  
Asymptotically Periodic ◽  
The One ◽  
Initial Boundary Value

AbstractInitial-boundary value problems for the one-dimensional linear advection–dispersion equation with decay (LAD) are studied by utilizing a unified method, known as the Fokas method. The method takes advantage of the spectral analysis of both parts of Lax pair and the global algebraic relation coupling all initial and boundary values. We present the explicit analytical solution of the LAD equation posed on the half line and a finite interval with general initial and boundary conditions. In addition, for the case of periodic boundary conditions, we show that the solution of the LAD equation is asymptotically t-periodic for large t if the Dirichlet boundary datum is periodic in t. Furthermore, it can be shown that if the Dirichlet boundary value is asymptotically periodic for large t, then so is the unknown Neumann boundary value, which is uniquely characterized in terms of the given asymptotically periodic Dirichlet boundary datum. The analytical predictions for large t are compared with numerical results showing the excellent agreement.

scholarly journals Quantum teleportation with imperfect quantum dots

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
F. Basso Basset ◽  
F. Salusti ◽  
L. Schweickert ◽  
M. B. Rota ◽  
D. Tedeschi ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Quantum Teleportation ◽  
Bell State ◽  
Spectral Filtering ◽  
State Measurement ◽  
Communication Architectures ◽  
The One ◽  
Experimental Findings ◽  
Photon Source ◽  
Remarkable Progress

AbstractEfficient all-photonic quantum teleportation requires fast and deterministic sources of highly indistinguishable and entangled photons. Solid-state-based quantum emitters—notably semiconductor quantum dots—are a promising candidate for the role. However, despite the remarkable progress in nanofabrication, proof-of-concept demonstrations of quantum teleportation have highlighted that imperfections of the emitter still place a major roadblock in the way of applications. Here, rather than focusing on source optimization strategies, we deal with imperfections and study different teleportation protocols with the goal of identifying the one with maximal teleportation fidelity. Using a quantum dot with sub-par values of entanglement and photon indistinguishability, we show that the average teleportation fidelity can be raised from below the classical limit to 0.842(14), adopting a polarization-selective Bell state measurement and moderate spectral filtering. Our results, which are backed by a theoretical model that quantitatively explains the experimental findings, loosen the very stringent requirements set on the ideal entangled-photon source and highlight that imperfect quantum dots can still have a say in teleportation-based quantum communication architectures.

scholarly journals On a stochastic Burgers equation with Dirichlet boundary conditions

2003 ◽  
Vol 2003 (43) ◽  
pp. 2735-2746 ◽  
Author(s):  
Ekaterina T. Kolkovska
Keyword(s):  
Weak Solution ◽  
Boundary Conditions ◽  
Dirichlet Boundary ◽  
Burgers Equation ◽  
Martingale Problem ◽  
Weak Limit ◽  
Dirichlet Boundary Conditions ◽  
One Dimensional ◽  
Stochastic Burgers Equation ◽  
The One

We consider the one-dimensional Burgers equation perturbed by a white noise term with Dirichlet boundary conditions and a non-Lipschitz coefficient. We obtain existence of a weak solution proving tightness for a sequence of polygonal approximations for the equation and solving a martingale problem for the weak limit.

scholarly journals Order parameter profiles in a system with Neumann – Neumann boundary conditions

2018 ◽  
Vol 145 ◽  
pp. 01009 ◽  
Author(s):  
Vassil M. Vassilev ◽  
Daniel M. Dantchev ◽  
Peter A. Djondjorov
Keyword(s):  
Boundary Conditions ◽  
Order Parameter ◽  
Neumann Boundary ◽  
Elliptic Functions ◽  
Thermodynamic System ◽  
Neumann Boundary Conditions ◽  
Ginzburg Landau ◽  
One Dimensional ◽  
The One ◽  
Field Plane

In this article we consider a critical thermodynamic system with the shape of a thin film confined between two parallel planes. It is assumed that the state of the system at a given temperature and external ordering field is described by order-parameter profiles, which minimize the one-dimensional counterpart of the standard ϕ4 Ginzburg–Landau Hamiltonian and meet the so-called Neumann – Neumann boundary conditions. We give analytic representation of the extremals of this variational problem in terms ofWeierstrass elliptic functions. Then, depending on the temperature and ordering field we determine the minimizers and obtain the phase diagram in the temperature-field plane.

scholarly journals Shaping nanoparticle fingerprints at the interface of cholesteric droplets

2018 ◽  
Vol 4 (10) ◽  
pp. eaat8597 ◽  
Author(s):  
Lisa Tran ◽  
Hye-Na Kim ◽  
Ningwei Li ◽  
Shu Yang ◽  
Kathleen J. Stebe ◽  
...  
Keyword(s):  
Liquid Crystals ◽  
Periodic Structures ◽  
Water Solution ◽  
Cholesteric Liquid Crystal ◽  
Solution Ph ◽  
Surrounding Water ◽  
Particle Assembly ◽  
Interfacial Assembly ◽  
Energy Applications ◽  
Geometric Frustration

The ordering of nanoparticles into predetermined configurations is of importance to the design of advanced technologies. Here, we balance the interfacial energy of nanoparticles against the elastic energy of cholesteric liquid crystals to dynamically shape nanoparticle assemblies at a fluid interface. By adjusting the concentration of surfactant that plays the dual role of tuning the degree of nanoparticle hydrophobicity and altering the molecular anchoring of liquid crystals, we pattern nanoparticles at the interface of cholesteric liquid crystal emulsions. In this system, interfacial assembly is tempered by elastic patterns that arise from the geometric frustration of confined cholesterics. Patterns are tunable by varying both surfactant and chiral dopant concentrations. Adjusting the particle hydrophobicity more finely by regulating the surfactant concentration and solution pH further modifies the rigidity of assemblies, giving rise to surprising assembly dynamics dictated by the underlying elasticity of the cholesteric. Because particle assembly occurs at the interface with the desired structures exposed to the surrounding water solution, we demonstrate that particles can be readily cross-linked and manipulated, forming structures that retain their shape under external perturbations. This study serves as a foundation for better understanding inter-nanoparticle interactions at interfaces by tempering their assembly with elasticity and for creating materials with chemical heterogeneity and linear, periodic structures, essential for optical and energy applications.

scholarly journals Simplified Grinding Temperature Model Study

2019 ◽  
Vol 6 (2) ◽  
pp. a1-a7
Author(s):  
N. V. Lishchenko ◽  
V. P. Larshin ◽  
H. Krachunov
Keyword(s):  
Differential Equation ◽  
Heat Conduction ◽  
Heat Source ◽  
Boundary Conditions ◽  
Grinding Temperature ◽  
Temperature Model ◽  
One Dimensional ◽  
Heating And Cooling ◽  
Equation Of Heat Conduction ◽  
The One

A study of a simplified mathematical model for determining the grinding temperature is performed. According to the obtained results, the equations of this model differ slightly from the corresponding more exact solution of the one-dimensional differential equation of heat conduction under the boundary conditions of the second kind. The model under study is represented by a system of two equations that describe the grinding temperature at the heating and cooling stages without the use of forced cooling. The scope of the studied model corresponds to the modern technological operations of grinding on CNC machines for conditions where the numerical value of the Peclet number is more than 4. This, in turn, corresponds to the Jaeger criterion for the so-called fast-moving heat source, for which the operation parameter of the workpiece velocity may be equivalently (in temperature) replaced by the action time of the heat source. This makes it possible to use a simpler solution of the one-dimensional differential equation of heat conduction at the boundary conditions of the second kind (one-dimensional analytical model) instead of a similar solution of the two-dimensional one with a slight deviation of the grinding temperature calculation result. It is established that the proposed simplified mathematical expression for determining the grinding temperature differs from the more accurate one-dimensional analytical solution by no more than 11 % and 15 % at the stages of heating and cooling, respectively. Comparison of the data on the grinding temperature change according to the conventional and developed equations has shown that these equations are close and have two points of coincidence: on the surface and at the depth of approximately threefold decrease in temperature. It is also established that the nature of the ratio between the scales of change of the Peclet number 0.09 and 9 and the grinding temperature depth 1 and 10 is of 100 to 10. Additionally, another unusual mechanism is revealed for both compared equations: a higher temperature at the surface is accompanied by a lower temperature at the depth. Keywords: grinding temperature, heating stage, cooling stage, dimensionless temperature, temperature model.

scholarly journals A General Expression for the Stagnant Thermal Conductivity of Stochastic and Periodic Structures

2018 ◽  
Vol 140 (5) ◽  
Author(s):  
X. Bai ◽  
C. Hasan ◽  
M. Mobedi ◽  
A. Nakayama
Keyword(s):  
Thermal Conductivity ◽  
General Expression ◽  
Metal Foam ◽  
Solid Angle ◽  
Periodic Structures ◽  
Three Dimensional ◽  
High Thermal Conductivity ◽  
Numerical Calculations ◽  
The One ◽  
Good Agreement

A general expression has been obtained to estimate thermal conductivities of both stochastic and periodic structures with high-solid thermal conductivity. An air layer partially occupied by slanted circular rods of high-thermal conductivity was considered to derive the general expression. The thermal conductivity based on this general expression was compared against that obtained from detailed three-dimensional numerical calculations. A good agreement between two sets of results substantiates the validity of the general expression for evaluating the stagnant thermal conductivity of the periodic structures. Subsequently, this expression was averaged over a hemispherical solid angle to estimate the stagnant thermal conductivity for stochastic structures such as a metal foam. The resulting expression was found identical to the one obtained by Hsu et al., Krishnan et al., and Yang and Nakayama. Thus, the general expression can be used for both stochastic and periodic structures.

Sign in / Sign up

Export Citation Format

Share Document