scholarly journals Dynamical behavior of coal shearer under the influence of multiple factors in slant-cutting conditions

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Xinwei Yang ◽  
Xianfeng Zou ◽  
Shuai Zhang ◽  
Hongyue Chen ◽  
Yajing Wei ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Fractal Theory ◽  
Dynamical Behavior ◽  
Three Dimensional ◽  
Cutting Conditions ◽  
Vibration Displacement ◽  
Flexible Beams ◽  
Swing Angle ◽  
Wear And Tear ◽  
Working Parameters

AbstractAiming at the problem of severe vibration and abnormal wear and tear of various components in coal shearer under slant-cutting conditions, a non-linear dynamics model with 13 degrees of freedom for a coal shearer under slant-cutting conditions is developed using vibration mechanics and multi-body dynamics theory, and the characteristics of the slide shoes-middle groove contact, the ranging arm-haulage unit connection with gaps and the guidance sliding boots-pin rail multi-surface contact with gaps are described based on three-dimensional fractal theory and Hertz contact theory. Based on Huco's law, the ranging arm and the hydraulic rod are assumed to be flexible beams, the rigidity characteristics of the ranging arm itself, the connection characteristics of the haulage unit and the fuselage are described, a drum correction load with a traction speed correction factor is proposed as the external excitation of the system, and the model is solved and analyzed. The research results show that the change of traction speed has a greater influence on the vibration swing angle and displacement of the front drum, front ranging arm and front walking unit, and the vibration swing angle and displacement of the three increase with the increase of traction speed, while the change of coalface hardness coefficient has less influence on the vibration displacement of the key components of the coal shearer. Under the working parameters of v = 3 m/min and f = 3, the swing angle and displacement of the front ranging arm and front drum fluctuate in the ranges of − 0.4–0.1 rad and – 15–15 mm respectively; the vibration acceleration is – 300–300 rad/s2 and – 200–200 mm/s2 respectively, the main vibration frequencies are 16.63 Hz and 12.14 Hz respectively, and finally the results are verified by experimental methods.

scholarly journals Design, Fabrication, and Testing of a Novel 3D 3-Fingered Electrothermal Microgripper with Multiple Degrees of Freedom

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 444
Author(s):  
Guoning Si ◽  
Liangying Sun ◽  
Zhuo Zhang ◽  
Xuping Zhang
Keyword(s):  
Degrees Of Freedom ◽  
Dynamic Properties ◽  
Three Dimensional ◽  
Polyimide Film ◽  
Zebrafish Embryos ◽  
Multiple Degrees Of Freedom ◽  
Electrothermal Actuator ◽  
3D Space ◽  
Pick And Place

This paper presents the design, fabrication, and testing of a novel three-dimensional (3D) three-fingered electrothermal microgripper with multiple degrees of freedom (multi DOFs). Each finger of the microgripper is composed of a V-shaped electrothermal actuator providing one DOF, and a 3D U-shaped electrothermal actuator offering two DOFs in the plane perpendicular to the movement of the V-shaped actuator. As a result, each finger possesses 3D mobilities with three DOFs. Each beam of the actuators is heated externally with the polyimide film. The durability of the polyimide film is tested under different voltages. The static and dynamic properties of the finger are also tested. Experiments show that not only can the microgripper pick and place microobjects, such as micro balls and even highly deformable zebrafish embryos, but can also rotate them in 3D space.

scholarly journals Asymmetry in Three-Dimensional Sprinting with and without Running-Specific Prostheses

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 580
Author(s):  
Anna Lena Emonds ◽  
Katja Mombaur
Keyword(s):  
Degrees Of Freedom ◽  
Body Position ◽  
Three Dimensional ◽  
Problem Formulation ◽  
Contact Phase ◽  
Individual Level ◽  
Lower Trunk ◽  
Floating Base ◽  
The Asymmetry ◽  
Limb Asymmetry

As a whole, human sprinting seems to be a completely periodic and symmetrical motion. This view is changed when a person runs with a running-specific prosthesis after a unilateral amputation. The aim of our study is to investigate differences and similarities between unilateral below-knee amputee and non-amputee sprinters—especially with regard to whether asymmetry is a distracting factor for sprint performance. We established three-dimensional rigid multibody models of one unilateral transtibial amputee athlete and for reference purposes of three non-amputee athletes. They consist of 16 bodies (head, ipper, middle and lower trunk, upper and lower arms, hands, thighs, shanks and feet/running specific prosthesis) with 30 or 31 degrees of freedom (DOFs) for the amputee and the non-amputee athletes, respectively. Six DOFs are associated with the floating base, the remaining ones are rotational DOFs. The internal joints are equipped with torque actuators except for the prosthetic ankle joint. To model the spring-like properties of the prosthesis, the actuator is replaced by a linear spring-damper system. We consider a pair of steps which is modeled as a multiphase problem with each step consisting of a flight, touchdown and single-leg contact phase. Each phase is described by its own set of differential equations. By combining motion capture recordings with a least squares optimal control problem formulation including constraints, we reconstructed the dynamics of one sprinting trial for each athlete. The results show that even the non-amputee athletes showed less symmetrical sprinting than expected when examined on an individual level. Nevertheless, the asymmetry is much more pronounced in the amputee athlete. The amputee athlete applies larger torques in the arm and trunk joints to compensate the asymmetry and experiences a destabilizing influence of the trunk movement. Hence, the inter-limb asymmetry of the amputee has a significant effect on the control of the sprint movement and the maintenance of an upright body position.

Three-dimensional asymmetric maximum weight lifting prediction considering dynamic joint strength

2021 ◽  
pp. 095441192098703
Author(s):  
Rahid Zaman ◽  
Yujiang Xiang ◽  
Jazmin Cruz ◽  
James Yang
Keyword(s):  
Experimental Data ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Three Dimensional ◽  
Optimization Method ◽  
Weight Lifting ◽  
Joint Torque ◽  
Maximum Weight ◽  
Angular Velocities ◽  
Asymmetric Lifting

In this study, the three-dimensional (3D) asymmetric maximum weight lifting is predicted using an inverse-dynamics-based optimization method considering dynamic joint torque limits. The dynamic joint torque limits are functions of joint angles and angular velocities, and imposed on the hip, knee, ankle, wrist, elbow, shoulder, and lumbar spine joints. The 3D model has 40 degrees of freedom (DOFs) including 34 physical revolute joints and 6 global joints. A multi-objective optimization (MOO) problem is solved by simultaneously maximizing box weight and minimizing the sum of joint torque squares. A total of 12 male subjects were recruited to conduct maximum weight box lifting using squat-lifting strategy. Finally, the predicted lifting motion, ground reaction forces, and maximum lifting weight are validated with the experimental data. The prediction results agree well with the experimental data and the model’s predictive capability is demonstrated. This is the first study that uses MOO to predict maximum lifting weight and 3D asymmetric lifting motion while considering dynamic joint torque limits. The proposed method has the potential to prevent individuals’ risk of injury for lifting.

Determination of the Workspace of a Three-Degrees-of-Freedom Parallel Manipulator Using a Three-Dimensional Computer-Aided-Design Software Package and the Concept of Virtual Chains1

2015 ◽  
Vol 8 (2) ◽  
Author(s):  
Andrew Johnson ◽  
Xianwen Kong ◽  
James Ritchie
Keyword(s):  
Computer Aided Design ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Graphical Representation ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Workspace Analysis ◽  
Computer Aided ◽  
Aided Design

The determination of workspace is an essential step in the development of parallel manipulators. By extending the virtual-chain (VC) approach to the type synthesis of parallel manipulators, this technical brief proposes a VC approach to the workspace analysis of parallel manipulators. This method is first outlined before being illustrated by the production of a three-dimensional (3D) computer-aided-design (CAD) model of a 3-RPS parallel manipulator and evaluating it for the workspace of the manipulator. Here, R, P and S denote revolute, prismatic and spherical joints respectively. The VC represents the motion capability of moving platform of a manipulator and is shown to be very useful in the production of a graphical representation of the workspace. Using this approach, the link interferences and certain transmission indices can be easily taken into consideration in determining the workspace of a parallel manipulator.

Nonlinear Dynamics and Application of the Four Dimensional Autonomous Hyper-Chaotic System

2014 ◽  
Author(s):  
Ge Kai ◽  
Wei Zhang
Keyword(s):  
Nonlinear Dynamics ◽  
Numerical Simulation ◽  
Differential Equations ◽  
Chaotic System ◽  
Dynamical Behavior ◽  
Three Dimensional ◽  
Phase Portraits ◽  
State Variables ◽  
Chaotic Motions ◽  
Finance System

In this paper, we establish a dynamic model of the hyper-chaotic finance system which is composed of four sub-blocks: production, money, stock and labor force. We use four first-order differential equations to describe the time variations of four state variables which are the interest rate, the investment demand, the price exponent and the average profit margin. The hyper-chaotic finance system has simplified the system of four dimensional autonomous differential equations. According to four dimensional differential equations, numerical simulations are carried out to find the nonlinear dynamics characteristic of the system. From numerical simulation, we obtain the three dimensional phase portraits that show the nonlinear response of the hyper-chaotic finance system. From the results of numerical simulation, it is found that there exist periodic motions and chaotic motions under specific conditions. In addition, it is observed that the parameter of the saving has significant influence on the nonlinear dynamical behavior of the four dimensional autonomous hyper-chaotic system.

Investigation of Train Dynamics in Passing Through Curves Using a Full Model

Joint Rail ◽  
2004 ◽  
Author(s):  
Mohammad Durali ◽  
Mohammad Mehdi Jalili Bahabadi
Keyword(s):  
Degrees Of Freedom ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Full Model ◽  
Bogie Frame ◽  
Nonlinear Characteristics ◽  
Train Derailment ◽  
Train Dynamics

In this article a train model is developed for studying train derailment in passing through bends. The model is three dimensional, nonlinear, and considers 43 degrees of freedom for each wagon. All nonlinear characteristics of suspension elements as well as flexibilities of wagon body and bogie frame, and the effect of coupler forces are included in the model. The equations of motion for the train are solved numerically for different train conditions. A neural network was constructed as an element in solution loop for determination of wheel-rail contact geometry. Derailment factor was calculated for each case. The results are presented and show the major role of coupler forces on possible train derailment.

A Quasi-three-dimensional Finite-volume Shallow Water Model for Green Water on Deck

2013 ◽  
Vol 57 (03) ◽  
pp. 125-140
Author(s):  
Daniel A. Liut ◽  
Kenneth M. Weems ◽  
Tin-Guen Yen
Keyword(s):  
Shallow Water ◽  
Finite Volume ◽  
Time Domain ◽  
Degrees Of Freedom ◽  
Initial Conditions ◽  
Three Dimensional ◽  
Green Water ◽  
Water Model ◽  
Ship Motions ◽  
Shallow Water Model

A quasi-three-dimensional hydrodynamic model is presented to simulate shallow water phenomena. The method is based on a finite-volume approach designed to solve shallow water equations in the time domain. The nonlinearities of the governing equations are considered. The methodology can be used to compute green water effects on a variety of platforms with six-degrees-of-freedom motions. Different boundary and initial conditions can be applied for multiple types of moving platforms, like a ship's deck, tanks, etc. Comparisons with experimental data are discussed. The shallow water model has been integrated with the Large Amplitude Motions Program to compute the effects of green water flow over decks within a time-domain simulation of ship motions in waves. Results associated to this implementation are presented.

Interstitial Nucleus of Cajal Encodes Three-Dimensional Head Orientations in Fick-Like Coordinates

2007 ◽  
Vol 97 (1) ◽  
pp. 604-617 ◽  
Author(s):  
Eliana M. Klier ◽  
Hongying Wang ◽  
J. Douglas Crawford
Keyword(s):  
Coordinate System ◽  
Degrees Of Freedom ◽  
Three Dimensional ◽  
Semicircular Canals ◽  
Head Rotation ◽  
Head Orientation ◽  
Interstitial Nucleus Of Cajal ◽  
The Gaze ◽  
Behavioral Constraints ◽  
The Right

Two central, related questions in motor control are 1) how the brain represents movement directions of various effectors like the eyes and head and 2) how it constrains their redundant degrees of freedom. The interstitial nucleus of Cajal (INC) integrates velocity commands from the gaze control system into position signals for three-dimensional eye and head posture. It has been shown that the right INC encodes clockwise (CW)-up and CW-down eye and head components, whereas the left INC encodes counterclockwise (CCW)-up and CCW-down components, similar to the sensitivity directions of the vertical semicircular canals. For the eyes, these canal-like coordinates align with Listing’s plane (a behavioral strategy limiting torsion about the gaze axis). By analogy, we predicted that the INC also encodes head orientation in canal-like coordinates, but instead, aligned with the coordinate axes for the Fick strategy (which constrains head torsion). Unilateral stimulation (50 μA, 300 Hz, 200 ms) evoked CW head rotations from the right INC and CCW rotations from the left INC, with variable vertical components. The observed axes of head rotation were consistent with a canal-like coordinate system. Moreover, as predicted, these axes remained fixed in the head, rotating with initial head orientation like the horizontal and torsional axes of a Fick coordinate system. This suggests that the head is ordinarily constrained to zero torsion in Fick coordinates by equally activating CW/CCW populations of neurons in the right/left INC. These data support a simple mechanism for controlling head orientation through the alignment of brain stem neural coordinates with natural behavioral constraints.

Sign in / Sign up

Export Citation Format

Share Document