scholarly journals Aberration-free volumetric high-speed imaging of in vivo retina

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Dierck Hillmann ◽  
Hendrik Spahr ◽  
Carola Hain ◽  
Helge Sudkamp ◽  
Gesa Franke ◽  
...  
2021 ◽  
Vol 12 ◽  
Author(s):  
Junjie Zeng ◽  
Wenying Zhao ◽  
Shuhua Yue

The high attrition rates of anti-cancer drugs during clinical development remains a bottleneck problem in pharmaceutical industry. This is partially due to the lack of quantitative, selective, and rapid readouts of anti-cancer drug activity in situ with high resolution. Although fluorescence microscopy has been commonly used in oncology pharmacological research, fluorescent labels are often too large in size for small drug molecules, and thus may disturb the function or metabolism of these molecules. Such challenge can be overcome by coherent Raman scattering microscopy, which is capable of chemically selective, highly sensitive, high spatial resolution, and high-speed imaging, without the need of any labeling. Coherent Raman scattering microscopy has tremendously improved the understanding of pharmaceutical materials in the solid state, pharmacokinetics of anti-cancer drugs and nanocarriers in vitro and in vivo. This review focuses on the latest applications of coherent Raman scattering microscopy as a new emerging platform to facilitate oncology pharmacokinetic research.


Sensors ◽  
2021 ◽  
Vol 21 (19) ◽  
pp. 6463
Author(s):  
Sevin Samadi ◽  
Javad Dargahi ◽  
Sivakumar Narayanswamy

We report the design of a high-efficiency spectral-domain spectrometer with cylindrical optics for line scanning optical coherence tomography (OCT). The spectral nonlinearity in k space (wavenumber) lowers the depth-dependent signal sensitivity of the spectrometers. For linearizing, in this design, grating and prism have been introduced. For line scanning, a cylindrical mirror is utilized in the scanning part. Line scanning improves the speed of imaging compared to fly-spot scanning. Line scanning OCT requires a spectrometer that utilizes cylindrical optics. In this work, an optical design of a linear wavenumber spectrometer with cylindrical optics is introduced. While there are many works using grating and prism to linearize the K space spectrometer design, there is no work on linearizing the k-space spectrometer with cylindrical optics for line scanning that provides high sensitivity and high-speed imaging without the need for resampling. The design of the spectrometer was achieved through MATLAB and ZEMAX simulations. The spectrometer design is optimized for the broadband light source with a center wavelength of 830 ± 100 nm (8.607 μm−1− 6.756 μm−1 in k-space). The variation in the output angle with respect to the wavenumber can be mentioned as a nonlinearity error. From our design results, it is observed that the nonlinearity error reduced from 147.0115 to 0.0149 Δθ*μm within the wavenumber range considered. The use of the proposed reflective optics for focusing reduces the chromatic aberration and increases image quality (measured by the Strehl ratio (SR)). The complete system will provide clinicians a powerful tool for real-time diagnosis, treatment, and guidance in surgery with high image quality for in-vivo applications.


2000 ◽  
Vol 98 (4) ◽  
pp. 401-407 ◽  
Author(s):  
Leanne M. D. DELBRIDGE ◽  
Pamela J. CONNELL ◽  
Peter J. HARRIS ◽  
Trefor O. MORGAN

Little is known about the direct cardiac effects of socially common sub-intoxication levels of ethanol. Previous studies evaluating the responses of normal cardiomyocytes to short-term ethanol exposure have utilized ethanol concentrations equivalent to extreme intoxication or lethal levels in vivo. The purpose of the present study was to investigate the contractile responses of isolated rat ventricular cardiomyocytes during exposure to relatively low concentrations of ethanol in the range 0.05–0.5% (v/v) (8.6–86 mM) under physiological conditions (3 Hz stimulation; 36 °C; BSA vehicle). High-speed imaging techniques were used to study the kinetics of myocyte contraction, and shortening parameters were calculated for mechanistic evaluation. The concentration–response relationship was not linear and exhibited two plateau phases, suggesting at least two mechanisms of action of ethanol on cardiomyocyte contraction. At 0.05% (8.6 mM), ethanol treatment produced a 14.4% decrease in maximum myocyte shortening. The maximum rates of cell shortening and lengthening were similarly impaired, but there was no effect on contraction cycle timing at this low concentration. At 0.30% (51 mM), ethanol reduced maximum shortening by 40.2%, prolonged excitation–contraction coupling latency and abbreviated the contraction cycle time by 38%. The inotropic modulatory effect of ethanol was exaggerated in the absence of protein in the superfusion buffer. This is the first report which identifies ethanol at 0.05% (v/v) as a modulator of cardiac contractility. Kinetic analyses indicate that the mechanism of action involves disturbance of sarcoplasmic reticulum function, and this may contribute to arrhythmogenic vulnerability – especially in an in vivo context of heightened compensatory sympathetic drive.


2020 ◽  
Author(s):  
Jill Juneau ◽  
Guillaume Duret ◽  
Joshua P. Chu ◽  
Alexander V. Rodriguez ◽  
Savva Morozov ◽  
...  

AbstractObserving the activity of large populations of neurons in vivo is critical for understanding brain function and dysfunction. The use of fluorescent genetically-encoded calcium indicators (GECIs) in conjunction with miniaturized microscopes is an exciting emerging toolset for recording neural activity in unrestrained animals. Despite their potential, current miniaturized microscope designs are limited by using image sensors with low frame rates, sensitivity, and resolution. Beyond GECIs, there are many neuroscience applications which would benefit from the use of other emerging neural indicators, such as fluorescent genetically-encoded voltage indicators (GEVIs) that have faster temporal resolution to match neuron spiking, yet, require imaging at high speeds to properly sample the activity-dependent signals. We integrated an advanced CMOS image sensor into a popular open-source miniaturized microscope platform. MiniFAST is a fast and sensitive miniaturized microscope capable of 1080p video, 1.5 µm resolution, frame rates up to 500 Hz and high gain ability (up to 70 dB) to image in extremely low light conditions. We report results of high speed 500 Hz in vitro imaging of a GEVI and ∼300 Hz in vivo imaging of transgenic Thy1-GCaMP6f mice. Finally, we show the potential for a reduction in photobleaching by using high gain imaging with ultra-low excitation light power (0.05 mW) at 60 Hz frame rates while still resolving Ca2+ spiking activity. Our results extend miniaturized microscope capabilities in high-speed imaging, high sensitivity and increased resolution opening the door for the open-source community to use fast and dim neural indicators.


2006 ◽  
Vol 14 (26) ◽  
pp. 12902 ◽  
Author(s):  
H. Lim ◽  
M. Mujat ◽  
C. Kerbage ◽  
E. C. W. Lee ◽  
Y. Chen ◽  
...  

2006 ◽  
Vol 11 (5) ◽  
pp. 054034 ◽  
Author(s):  
Vladimir P. Zharov ◽  
Ekaterina I. Galanzha ◽  
Yulian Menyaev ◽  
Valery V. Tuchin

2019 ◽  
Vol 47 (3) ◽  
pp. 196-210
Author(s):  
Meghashyam Panyam ◽  
Beshah Ayalew ◽  
Timothy Rhyne ◽  
Steve Cron ◽  
John Adcox

ABSTRACT This article presents a novel experimental technique for measuring in-plane deformations and vibration modes of a rotating nonpneumatic tire subjected to obstacle impacts. The tire was mounted on a modified quarter-car test rig, which was built around one of the drums of a 500-horse power chassis dynamometer at Clemson University's International Center for Automotive Research. A series of experiments were conducted using a high-speed camera to capture the event of the rotating tire coming into contact with a cleat attached to the surface of the drum. The resulting video was processed using a two-dimensional digital image correlation algorithm to obtain in-plane radial and tangential deformation fields of the tire. The dynamic mode decomposition algorithm was implemented on the deformation fields to extract the dominant frequencies that were excited in the tire upon contact with the cleat. It was observed that the deformations and the modal frequencies estimated using this method were within a reasonable range of expected values. In general, the results indicate that the method used in this study can be a useful tool in measuring in-plane deformations of rolling tires without the need for additional sensors and wiring.


Sign in / Sign up

Export Citation Format

Share Document