Photophysics of 7-(diethylamino)coumarin-3-carboxylic acid in cationic micelles: effect of chain length and head group of the surfactants and urea

RSC Advances ◽  
2014 ◽  
Vol 4 (64) ◽  
pp. 34026-34036 ◽  
Author(s):  
Aninda Chatterjee ◽  
Banibrata Maity ◽  
Debabrata Seth
2020 ◽  
Author(s):  
Vladimir Katev ◽  
Zahari Vinarov ◽  
Slavka S. Tcholakova

Despite the widespread use of lipid excipients in both academic research and oral formulation development, rational selection guidelines are still missing. In the current study, we aimed to establish a link between the molecular structure of commonly used polar lipids and drug solubilization in biorelevant media. We studied the effect of 26 polar lipids of the fatty acid, phospholipid or monoglyceride type on the solubilization of fenofibrate in a two-stage <i>in vitro</i> GI tract model. The main trends were checked also with progesterone and danazol.<br>Based on their fenofibrate solubilization efficiency, the polar lipids can be grouped in 3 main classes. Class 1 substances (n = 5) provide biggest enhancement of drug solubilization (>10-fold) and are composed only by unsaturated compounds. Class 2 materials (n = 10) have an intermediate effect (3-10 fold increase) and are composed primarily (80 %) of saturated compounds. Class 3 materials (n = 11) have very low or no effect on drug solubilization and are entirely composed of saturated compounds.<br>The observed behaviour of the polar lipids was rationalized by using two classical physicochemical parameters: the acyl chain phase transition temperature (<i>T</i><sub>m</sub>) and the critical micellar concentration (CMC). Hence, the superior performance of class 1 polar lipids was explained by the double bonds in their acyl chains, which: (1) significantly decrease <i>T</i><sub>m</sub>, allowing these C18 lipids to form colloidal aggregates and (2) prevent tight packing of the molecules in the aggregates, resulting in bigger volume available for drug solubilization. Long-chain (C18) saturated polar lipids had no significant effect on drug solubilization because their <i>T</i><sub>m</sub> was much higher than the temperature of the experiment (<i>T</i> = 37 C) and, therefore, their association in colloidal aggregates was limited. On the other end of the spectrum, the short chain octanoic acid manifested a high CMC (50 mM), which had to be exceeded in order to enhance drug solubilization. When these two parameters were satisfied (C > CMC, <i>T</i><sub>m</sub> < <i>T</i><sub>exp</sub>), the increase of the polar lipid chain length increased the drug solubilization capacity (similarly to classical surfactants), due to the decreased CMC and bigger volume available for solubilization.<br>The hydrophilic head group also has a dramatic impact on the drug solubilization enhancement, with polar lipids performance decreasing in the order: choline phospholipids > monoglycerides > fatty acids.<br>As both the acyl chain length and the head group type are structural features of the polar lipids, and not of the solubilized drugs, the impact of <i>T</i><sub>m</sub> and CMC on solubilization by polar lipids should hold true for a wide variety of hydrophobic molecules. The obtained mechanistic insights can guide rational drug formulation development and thus support modern drug discovery pipelines.<br>


2020 ◽  
Author(s):  
Vladimir Katev ◽  
Zahari Vinarov ◽  
Slavka S. Tcholakova

Despite the widespread use of lipid excipients in both academic research and oral formulation development, rational selection guidelines are still missing. In the current study, we aimed to establish a link between the molecular structure of commonly used polar lipids and drug solubilization in biorelevant media. We studied the effect of 26 polar lipids of the fatty acid, phospholipid or monoglyceride type on the solubilization of fenofibrate in a two-stage <i>in vitro</i> GI tract model. The main trends were checked also with progesterone and danazol.<br>Based on their fenofibrate solubilization efficiency, the polar lipids can be grouped in 3 main classes. Class 1 substances (n = 5) provide biggest enhancement of drug solubilization (>10-fold) and are composed only by unsaturated compounds. Class 2 materials (n = 10) have an intermediate effect (3-10 fold increase) and are composed primarily (80 %) of saturated compounds. Class 3 materials (n = 11) have very low or no effect on drug solubilization and are entirely composed of saturated compounds.<br>The observed behaviour of the polar lipids was rationalized by using two classical physicochemical parameters: the acyl chain phase transition temperature (<i>T</i><sub>m</sub>) and the critical micellar concentration (CMC). Hence, the superior performance of class 1 polar lipids was explained by the double bonds in their acyl chains, which: (1) significantly decrease <i>T</i><sub>m</sub>, allowing these C18 lipids to form colloidal aggregates and (2) prevent tight packing of the molecules in the aggregates, resulting in bigger volume available for drug solubilization. Long-chain (C18) saturated polar lipids had no significant effect on drug solubilization because their <i>T</i><sub>m</sub> was much higher than the temperature of the experiment (<i>T</i> = 37 C) and, therefore, their association in colloidal aggregates was limited. On the other end of the spectrum, the short chain octanoic acid manifested a high CMC (50 mM), which had to be exceeded in order to enhance drug solubilization. When these two parameters were satisfied (C > CMC, <i>T</i><sub>m</sub> < <i>T</i><sub>exp</sub>), the increase of the polar lipid chain length increased the drug solubilization capacity (similarly to classical surfactants), due to the decreased CMC and bigger volume available for solubilization.<br>The hydrophilic head group also has a dramatic impact on the drug solubilization enhancement, with polar lipids performance decreasing in the order: choline phospholipids > monoglycerides > fatty acids.<br>As both the acyl chain length and the head group type are structural features of the polar lipids, and not of the solubilized drugs, the impact of <i>T</i><sub>m</sub> and CMC on solubilization by polar lipids should hold true for a wide variety of hydrophobic molecules. The obtained mechanistic insights can guide rational drug formulation development and thus support modern drug discovery pipelines.<br>


Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1636
Author(s):  
Stella Afroditi Mountaki ◽  
Maria Kaliva ◽  
Konstantinos Loukelis ◽  
Maria Chatzinikolaidou ◽  
Maria Vamvakaki

Main chain polyesters have been extensively used in the biomedical field. Despite their many advantages, including biocompatibility, biodegradability, and others, these materials are rather inert and lack specific functionalities which will endow them with additional biological and responsive properties. In this work, novel pH-responsive main chain polyesters have been prepared by a conventional condensation polymerization of a vinyl functionalized diol with a diacid chloride, followed by a photo-induced thiol-ene click reaction to attach functional carboxylic acid side-groups along the polymer chains. Two different mercaptocarboxylic acids were employed, allowing to vary the alkyl chain length of the polymer pendant groups. Moreover, the degree of modification, and as a result, the carboxylic acid content of the polymers, was easily tuned by varying the irradiation time during the click reaction. Both these parameters, were shown to strongly influence the responsive behavior of the polyesters, which presented adjustable pKα values and water solubilities. Finally, the difunctional polyesters bearing the alkene and carboxylic acid functionalities enabled the preparation of cross-linked polyester films by chemically linking the pendant vinyl bonds on the polymer side groups. The biocompatibility of the cross-linked polymers films was assessed in L929 fibroblast cultures and showed that the cell viability, proliferation, and attachment were greatly promoted on the polyester surface, bearing the shorter alkyl chain length side groups and the higher fraction of carboxylic acid functionalities.


2008 ◽  
Vol 112 (12) ◽  
pp. 3684-3692 ◽  
Author(s):  
Alok Chakrabarty ◽  
Paramita Das ◽  
Arabinda Mallick ◽  
Nitin Chattopadhyay

Langmuir ◽  
1997 ◽  
Vol 13 (17) ◽  
pp. 4583-4587 ◽  
Author(s):  
Lucia Brinchi ◽  
Pietro Di Profio ◽  
Raimondo Germani ◽  
Gianfranco Savelli ◽  
Clifford A. Bunton

2018 ◽  
Vol 18 (5) ◽  
pp. 3249-3268 ◽  
Author(s):  
Federica Sebastiani ◽  
Richard A. Campbell ◽  
Kunal Rastogi ◽  
Christian Pfrang

Abstract. Reactions of the key atmospheric nighttime oxidant NO3 with organic monolayers at the air–water interface are used as proxies for the ageing of organic-coated aqueous aerosols. The surfactant molecules chosen for this study are oleic acid (OA), palmitoleic acid (POA), methyl oleate (MO) and stearic acid (SA) to investigate the effects of chain length, head group and degree of unsaturation on the reaction kinetics and products formed. Fully and partially deuterated surfactants were studied using neutron reflectometry (NR) to determine the reaction kinetics of organic monolayers with NO3 at the air–water interface for the first time. Kinetic modelling allowed us to determine the rate coefficients for the oxidation of OA, POA and MO monolayers to be (2.8±0.7) × 10−8, (2.4±0.5) × 10−8and (3.3±0.6) × 10−8 cm2 molecule−1 s−1 for fitted initial desorption lifetimes of NO3 at the closely packed organic monolayers, τd, NO3, 1, of 8.1±4.0, 16±4.0 and 8.1±3.0 ns, respectively. The approximately doubled desorption lifetime found in the best fit for POA compared to OA and MO is consistent with a more accessible double bond associated with the shorter alkyl chain of POA facilitating initial NO3 attack at the double bond in a closely packed monolayer. The corresponding uptake coefficients for OA, POA and MO were found to be (2.1±0.5) × 10−3, (1.7±0.3) × 10−3 and (2.1±0.4) × 10−3, respectively. For the much slower NO3-initiated oxidation of the saturated surfactant SA we estimated a loss rate of approximately (5±1) × 10−12 cm2 molecule−1 s−1, which we consider to be an upper limit for the reactive loss, and estimated an uptake coefficient of ca. (5±1) × 10−7. Our investigations demonstrate that NO3 will contribute substantially to the processing of unsaturated surfactants at the air–water interface during nighttime given its reactivity is ca. 2 orders of magnitude higher than that of O3. Furthermore, the relative contributions of NO3 and O3 to the oxidative losses vary massively between species that are closely related in structure: NO3 reacts ca. 400 times faster than O3 with the common model surfactant oleic acid, but only ca. 60 times faster with its methyl ester MO. It is therefore necessary to perform a case-by-case assessment of the relative contributions of the different degradation routes for any specific surfactant. The overall impact of NO3 on the fate of saturated surfactants is slightly less clear given the lack of prior kinetic data for comparison, but NO3 is likely to contribute significantly to the loss of saturated species and dominate their loss during nighttime. The retention of the organic character at the air–water interface differs fundamentally between the different surfactant species: the fatty acids studied (OA and POA) form products with a yield of  ∼ 20 % that are stable at the interface while NO3-initiated oxidation of the methyl ester MO rapidly and effectively removes the organic character ( ≤ 3 % surface-active products). The film-forming potential of reaction products in real aerosol is thus likely to depend on the relative proportions of saturated and unsaturated surfactants as well as the head group properties. Atmospheric lifetimes of unsaturated species are much longer than those determined with respect to their reactions at the air–water interface, so they must be protected from oxidative attack, for example, by incorporation into a complex aerosol matrix or in mixed surface films with yet unexplored kinetic behaviour.


1982 ◽  
Vol 204 (3) ◽  
pp. 749-756 ◽  
Author(s):  
M C Sugden ◽  
D I Watts ◽  
C E Marshall

1. Injection of adrenaline into 24 h-starved rats caused a 69% decrease in blood [ketone-body] (3-hydroxybutyrate plus acetoacetate), accompanied by a decreased [3-hydroxybutyrate]/[acetoacetate] ratio. Blood [glucose] and [lactate] increased, but [alanine] was unchanged. 2. Adrenaline also decreased [ketone-body] after intragastric feeding of both long- and medium-chain triacylglycerol. The latter decrease was observed after suppression of lipolysis with 5-methylpyrazole-3-carboxylic acid, indicating that the antiketogenic action of adrenaline was not dependent on the chain length of the precursor fatty acid. 3. The actions of adrenaline to decrease blood [ketone-body] and to increase blood [glucose] were not observed after administration of 3-mercaptopicolinate, an inhibitor of gluconeogenesis. This suggests that these effects of the hormone are related. 4. The possible clinical significance of the results is discussed with reference to the restricted ketosis often observed after surgical or orthopaedic injury.


2019 ◽  
Vol 166 (5) ◽  
pp. 441-448 ◽  
Author(s):  
Rumana Yesmin Hasi ◽  
Makoto Miyagi ◽  
Katsuya Morito ◽  
Toshiki Ishikawa ◽  
Maki Kawai-Yamada ◽  
...  

Abstract Glycosylinositol phosphoceramide (GIPC) is the most abundant sphingolipid in plants and fungi. Recently, we detected GIPC-specific phospholipase D (GIPC-PLD) activity in plants. Here, we found that GIPC-PLD activity in young cabbage leaves catalyzes transphosphatidylation. The available alcohol for this reaction is a primary alcohol with a chain length below C4. Neither secondary alcohol, tertiary alcohol, choline, serine nor glycerol serves as an acceptor for transphosphatidylation of GIPC-PLD. We also found that cabbage GIPC-PLD prefers GIPC containing two sugars. Neither inositol phosphoceramide, mannosylinositol phosphoceramide nor GIPC with three sugar chains served as substrate. GIPC-PLD will become a useful catalyst for modification of polar head group of sphingophospholipid.


1999 ◽  
Vol 182 (2) ◽  
pp. 221-236 ◽  
Author(s):  
M.P. Savelli ◽  
P. Van Roekeghem ◽  
O. Douillet ◽  
G. Cavé ◽  
P. Godé ◽  
...  

2013 ◽  
Vol 89 (6) ◽  
pp. 1471-1478 ◽  
Author(s):  
María J. Tapia ◽  
María Monteserín ◽  
Hugh D. Burrows ◽  
João S. Seixas de Melo ◽  
Joan Estelrich

Sign in / Sign up

Export Citation Format

Share Document