Curcumin loaded nano graphene oxide reinforced fish scale collagen – a 3D scaffold biomaterial for wound healing applications

RSC Advances ◽  
2015 ◽  
Vol 5 (119) ◽  
pp. 98653-98665 ◽  
Author(s):  
Tapas Mitra ◽  
Piyali Jana Manna ◽  
S. T. K. Raja ◽  
A. Gnanamani ◽  
P. P. Kundu

We prepare a highly stabilized nano graphene oxide functionalized with type I collagen to make a 3D scaffold as a novel platform for better tissue engineering research..

2002 ◽  
Vol 11 (5) ◽  
pp. 489-494 ◽  
Author(s):  
Takashi Ushida ◽  
Katsuko Furukawa ◽  
Kenshi Toita ◽  
Tetsuya Tateishi

Tissue engineering approaches have been clinically tried to repair damaged articular cartilages. It is an essential step to uniformly seed chondrocytes into 3D scaffolds in order to reconstruct tissue-engineered cartilages in vitro, but the tissue engineering could not have been provided with efficient cell seeding methods. Type I collagen is clinically used and known as a cytocompatible material, having recognition sites for integrins. Collagen gel encapsulating chondrocytes has been tried for making regenerated cartilages, but it is found difficult to have the gel keep its original shape after long-term culture, because of shrinking. On the other hand, 3D scaffolds, either of a nonwoven structure or a sponge-like structure, involve difficulty in that chondrocytes could not be uniformly seeded, although they have adequate initial mechanical properties. In this study, by combining collagen gelation with a nonwoven PLLA scaffold, we achieved uniform cell seeding into the 3D scaffold. Bovine articular chondrocytes were mixed with type I collagen solution, and the solution was poured into the nonwoven PLLA scaffold (1.5 mm thick, f 15 mm). The collagen–chondrocyte mixture was made into gel at 37°C for 1 h. The 0.39% collagen mixture was viscous enough to prevent cells from precipitating during gelation. Almost all chondrocytes were able to be incorporated into the PLLA scaffolds by mixing with collagen solution and subsequently making into gel, while 30–40% of the chondrocytes seeded as a cell suspension were not trapped into the PLLA scaffolds. The method presented, where chondrocytes were mixed with collagen solution, and the mixture was incorporated into a 3D scaffold, then made into gel in the scaffold, could serve as an alternative for in vitro cartilage regeneration, also simultaneously having the advantages of both materials.


2021 ◽  
Vol 19 ◽  
pp. 228080002198969
Author(s):  
Min-Xia Zhang ◽  
Wan-Yi Zhao ◽  
Qing-Qing Fang ◽  
Xiao-Feng Wang ◽  
Chun-Ye Chen ◽  
...  

The present study was designed to fabricate a new chitosan-collagen sponge (CCS) for potential wound dressing applications. CCS was fabricated by a 3.0% chitosan mixture with a 1.0% type I collagen (7:3(w/w)) through freeze-drying. Then the dressing was prepared to evaluate its properties through a series of tests. The new-made dressing demonstrated its safety toward NIH3T3 cells. Furthermore, the CCS showed the significant surround inhibition zone than empty controls inoculated by E. coli and S. aureus. Moreover, the moisture rates of CCS were increased more rapidly than the collagen and blank sponge groups. The results revealed that the CCS had the characteristics of nontoxicity, biocompatibility, good antibacterial activity, and water retention. We used a full-thickness excisional wound healing model to evaluate the in vivo efficacy of the new dressing. The results showed remarkable healing at 14th day post-operation compared with injuries treated with collagen only as a negative control in addition to chitosan only. Our results suggest that the chitosan-collagen wound dressing were identified as a new promising candidate for further wound application.


Biomolecules ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1027
Author(s):  
Ali Fatehi Hassanabad ◽  
Anna N. Zarzycki ◽  
Kristina Jeon ◽  
Jameson A. Dundas ◽  
Vishnu Vasanthan ◽  
...  

Post-operative adhesions affect patients undergoing all types of surgeries. They are associated with serious complications, including higher risk of morbidity and mortality. Given increased hospitalization, longer operative times, and longer length of hospital stay, post-surgical adhesions also pose a great financial burden. Although our knowledge of some of the underlying mechanisms driving adhesion formation has significantly improved over the past two decades, literature has yet to fully explain the pathogenesis and etiology of post-surgical adhesions. As a result, finding an ideal preventative strategy and leveraging appropriate tissue engineering strategies has proven to be difficult. Different products have been developed and enjoyed various levels of success along the translational tissue engineering research spectrum, but their clinical translation has been limited. Herein, we comprehensively review the agents and products that have been developed to mitigate post-operative adhesion formation. We also assess emerging strategies that aid in facilitating precision and personalized medicine to improve outcomes for patients and our healthcare system.


Nano LIFE ◽  
2012 ◽  
Vol 02 (04) ◽  
pp. 1230010 ◽  
Author(s):  
JEN-CHIEH WU ◽  
H. PETER LORENZ

Electrospinning is a process for generating micrometer or nanometer scale polymer fibers with large surface areas and high porosity. For tissue engineering research, the electrospinning technique provides a quick way to fabricate fibrous scaffolds with dimensions comparable to the extracellular matrix (ECM). A variety of materials can be used in the electrospinning process, including natural biomaterials as well as synthetic polymers. The natural biomaterials have advantages such as excellent biocompatibility and biodegradability, which can be more suitable for making biomimic scaffolds. In the last two decades, there have been growing numbers of studies of biomaterial fibrous scaffolds using the electrospinning process. In this review, we will discuss biomaterials in the electrospinning process and their applications in tissue engineering.


MRS Bulletin ◽  
1996 ◽  
Vol 21 (11) ◽  
pp. 36-39 ◽  
Author(s):  
Ugo Ripamonti ◽  
Nicolaas Duneas

Recent advances in materials science and biotechnology have given birth to the new and exciting field of tissue engineering, in which the two normally disparate fields are merging into a profitable matrimony. In particular the use of biomaterials capable of initiating new bone formation via a process called osteoinduction is leading to quantum leaps for the tissue engineering of bone.The classic work of Marshall R. Urist and A. Hari Reddi opened the field of osteoinductive biomaterials. Urist discovered that, upon implantation of devitalized, demineralized bone matrix in the muscle of experimental animals, new bone formation occurs within two weeks, a phenomenon he described as bone formation by induction. The tissue response elicited by implantation of demineralized bone matrix in muscle or under the skin includes activation and migration of undifferentiated mesenchymal cells by chemotaxis, anchoragedependent cell attachment to the matrix, mitosis and proliferation of mesenchymal cells, differentiation of cartilage, mineralization of the cartilage, vascular invasion of the cartilage, differentiation of osteoblasts and deposition of bone matrix, and finally mineralization of bone and differentiation of marrow in the newly developed ossicle.The osteoinductive ability of the extracellular matrix of bone is abolished by the dissociative extraction of the demineralized matrix, but is recovered when the extracted component, itself inactive, is reconstituted with the inactive residue—mainly insoluble collagenous bone matrix. This important experiment showed that the osteoinductive signal resides in the solubilized component but needs to be reconstituted with an appropriate carrier to restore the osteoinductive activity. In this case, the carrier is the insoluble collagenous bone matrix—mainly crosslinked type I collagen.


Author(s):  
Kui Zhang ◽  
Qianqian Huang ◽  
Yu Li ◽  
Lanhua Liu ◽  
Xiao-Feng Tang ◽  
...  

Enzymatic degradation of collagen is of great industrial and environmental significance; however, little is known about thermophile-derived collagenolytic proteases. Here, we report a novel collagenolytic protease (TSS) from thermophilic Brevibacillus sp. WF146. The TSS precursor comprises a signal peptide, an N-terminal propeptide, a subtilisin-like catalytic domain, a β-jelly roll (βJR) domain, and a prepeptidase C-terminal (PPC) domain. The maturation of TSS involves a stepwise autoprocessing of the N-terminal propeptide and the PPC domain, and the βJR rather than the PPC domain is necessary for correct folding of the enzyme. Purified mature TSS displayed optimal activity at 70°C and pH 9.0, a half-life of 1.5 h at 75°C, and an increased thermostability with rising salinity up to 4 M. TSS possesses an increased number of surface acidic residues and ion pairs, as well as four Ca 2+ -binding sites, which contribute to its high thermostability and halotolerance. At high temperatures, TSS exhibited high activity toward insoluble type I collagen and azocoll, but showed a low gelatinolytic activity, with a strong preference for Arg and Gly at the P1 and P1’ positions, respectively. Both the βJR and PPC domains could bind but not swell collagen, and thus facilitate TSS-mediated collagenolysis via improving the accessibility of the enzyme to the substrate. Additionally, TSS has the ability to efficiently degrade fish scale collagen at high temperatures. IMPORTANCE Proteolytic degradation of collagen at high temperatures has the advantages of increasing degradation efficiency and minimizing the risk of microbial contamination. Reports on thermostable collagenolytic proteases are limited, and their maturation and catalytic mechanisms remain to be elucidated. Our results demonstrate that the thermophile-derived TSS matures in an autocatalytic manner, and represents one of the most thermostable collagenolytic proteases reported so far. At elevated temperatures, TSS prefers hydrolyzing insoluble heat-denatured collagen rather than gelatin, providing new insight into the mechanism of collagen degradation by thermostable collagenolytic proteases. Moreover, TSS has the potential to be used in recycling collagen-rich wastes such as fish scales.


2004 ◽  
Vol 29 (4) ◽  
pp. 370
Author(s):  
Gwang-Hee Lee ◽  
Sung-Yoon Huh ◽  
Sang-Hyuk Park

2020 ◽  
Author(s):  
N Pearman ◽  
SR Moxon ◽  
Susan Carnachan ◽  
ME Cooke ◽  
EI Nep ◽  
...  

© 2019 Elsevier Ltd The Malvaceae family is a group of flowering plants that include approximately 244 genera, and 4225 species. Grewia mollis, and Hoheria populnea (lacebark), are examples of the Malvaceae family that are used in traditional medicine. For this study polysaccharide samples were extracted from the inner bark of Grewia mollis (unmodified (GG) and destarched grewia gum (GGDS)) and from the leaves of Hoheria populnea (lacebark polysaccharide (LB)). Wound healing properties of grewia gum and lacebark polysaccharides were investigated using 3T3 fibroblast cells cultured in supplemented DMEM. Deposition of collagen using van Gieson's stain, expression of the COL1A1 gene which encodes type I collagen using quantitative PCR, and chemotaxis using a scratch plate assay were analysed following treatment of cells with the test polysaccharides. Quantitative PCR results indicated that all three polysaccharides increased the levels of COL1A1 mRNA, with GG showing the greatest fold change. Histological staining also indicated that the fibroblasts treated with GG deposited more collagen than control cells. Additionally, scratch assay data indicated that simulated cell ‘wounds’ treated with each polysaccharide showed increased wound closure rate over a 36 h period post treatment, with GG exhibiting the greatest effect on wound closure. Analysis of the Malvaceae derived polysaccharides indicates that they could have a positive effect on mechanisms that are integral to wound healing, potentially providing greater scientific understanding behind their use in traditional medicine.


Author(s):  
Letícia Fuganti CAMPOS ◽  
Eliane TAGLIARI ◽  
Thais Andrade Costa CASAGRANDE ◽  
Lúcia de NORONHA ◽  
Antônio Carlos L. CAMPOS ◽  
...  

ABSTRACT Background: Chronic wounds in patients with Diabetes Mellitus often become incurable due to prolonged and excessive production of inflammatory cytokines. The use of probiotics modifies the intestinal microbiota and modulates inflammatory reactions. Aim: To evaluate the influence of perioperative supplementation with probiotics in the cutaneous healing process in diabetic rats. Methods: Forty-six rats were divided into four groups (C3, P3, C10, P10) according to the treatment (P=probiotic or C=control, both orally administered) and day of euthanasia, 3rd or 10th postoperative days. All rats were induced to Diabetes Mellitus 72 h before starting the experiment with alloxan. Supplementation was initiated five days before the incision and maintained until euthanasia. Scalpel incision was guided by a 2x2 cm mold and the wounds were left to heal per second-intention. The wounds were digitally measured. Collagen densitometry was done with Picrosirius Red staining. Histological parameters were analyzed by staining by H&E. Results: The contraction of the wound was faster in the P10 group which resulted in a smaller scar area (p=0.011). There was an increase in type I collagen deposition from the 3rd to the 10th postoperative day in the probiotic groups (p=0.016), which did not occur in the control group (p=0.487). The histological analysis showed a better degree of healing in the P10 group (p=0.005), with fewer polymorphonuclear (p<0.001) and more neovessels (p=0.001). Conclusions: Perioperative supplementation of probiotics stimulates skin wound healing in diabetic rats, possibly due to attenuation of the inflammatory response and increased neovascularization and type I collagen deposition.


Sign in / Sign up

Export Citation Format

Share Document