scholarly journals Catalyst-dependent selectivity in sulfonium ylide cycloisomerization reactions

2018 ◽  
Vol 9 (35) ◽  
pp. 7091-7095 ◽  
Author(s):  
Rik Oost ◽  
James D. Neuhaus ◽  
Antonio Misale ◽  
Ricardo Meyrelles ◽  
Luís F. Veiros ◽  
...  

An unusual example of π-acid catalyst-dependent selectivity in the cycloisomerization of alkene-tethered sulfonium ylides affords cyclopropanes or dihydrofurans with excellent control of chemoselectivity.


1980 ◽  
Vol 45 (4) ◽  
pp. 1236-1250 ◽  
Author(s):  
Vladimír Král ◽  
Zdeněk Arnold ◽  
Václav Jehlička ◽  
Otto Exner

The geometry, charge distribution and dipole moments of parent sulfonium ylide - dimethylsulfoniomethylide (I) - and a series of stabilized sulfonium ylides, including 2-dimethylsulfuranylidene-1,3-cyclopentanedione (VI) prepared in this study, was investigated using the CNDO/2, PCILO and ab initio methods. Values of dipole moments, calculated by quantum chemical methods (CNDO/2 with sp and spd bases, ab initio with the STO-3G basis) as well as by the method of empirical bond moments, are compared with the experimental values determined in dioxane or benzene. Dipole moments of several related ammonium ylides were also studied.



Author(s):  
Heinz Seltmann

AbstractThe effect of maleic hydrazide (MH) per se on bright tobacco was determined by comparing plants treated with MH to those without MH under conditions of good chemical sucker control. Sequential applications of each of five contact-type agents with MH one week later (Group I) were compared to dual applications of each of the same contact agents (Group II). In Group II suckers missed during applications were individually wetted to ensure excellent control. Sucker control was measured as 95 % for Group I and assumed to be 99 % for Group II. There were no agronomic differences between Groups I and II. In the visual warehouse appraisal, there was only a statistical difference for thin-bodied tobaccos between the two groups and a trend for slightly more heavy-bodied tobaccos in Group I. The chemical and physical analyses showed that filling value at 13 % moisture and equilibrium moisture content (EMC) measured at 60 % relative humidity were significantly lower in Group I than Group II. The result for EMC was questioned. Actual values for total alkaloids, total volatile bases minus nicotine, total ash, and alkalinity number of water-soluble ash were lower and reducing sugars were higher where MH was used. Except for EMC, the findings in this study reflected those established in studies where MH-treated and normally hand-suckered tobaccos were compared, but the differences here were generally not as great.



2019 ◽  
Author(s):  
Michael Fischer

<p>The silicoaluminophosphate zeotype ECR-40, which has the MEI topology, contains linkages of AlO<sub>4</sub> tetrahedra via a common oxygen atom, thereby violating the famous “Löwenstein’s rule”. Due to the proven existence of Al-O-Al linkages in this material, it constitutes an ideal model system to study the acidity and mobility of protons associated with such unusual linkages. In addition, their properties can be directly compared to those of protons associated with more common Si-O-Al linkages, which are also present in ECR-40. In this work, static density functional theory (DFT) calculations including a dispersion correction were employed to study the preferred proton sites as well as the Brønsted acidity of the framework protons, followed by DFT-based ab-initio molecular dynamics (AIMD) to investigate the proton mobility in guest-free and hydrated ECR-40. Initially, two different proton arrangements were compared, one containing both H[O6] protons associated with Al-O-Al linkages and H[O10] protons at Si-O-Al linkages, the other one containing only H[O10] protons. The former model was found to be thermodynamically favoured, as a removal of protons from the Al-O-Al linkages causes a local accumulation of negative charge. Calculations of the deprotonation energy showed a moderately higher Brønsted acidity of the H[O10] protons, at variance with previous empirical explanations, which attributed the exceptional performance of ECR-40 as acid catalyst to the presence of Al‑O‑Al linkages. The AIMD simulations (<i>T</i> = 298 K) delivered no appreciable proton mobility for guest-free ECR-40 and for low levels of hydration (one H<sub>2</sub>O per framework proton). Under saturation conditions, framework deprotonation occurred, leading to the formation of protonated water clusters in the pores. Pronounced differences between the two types of framework protons were observed: While the H[O10] protons were always removed from the Si-O-Al linkages, the Al-O-Al linkages remained mostly protonated, but deprotonation did occur to a minor extent. The observation of a degree of framework deprotonation of Al-O-Al linkages differs from the findings reported in a recent computational study of hydrated aluminosilicate zeolites with such linkages (Heard et al., <i>Chem. Sci.</i> <b>2019</b>, <i>10</i>, 5705), pointing to an influence of the overall framework composition. Further inspection of the AIMD results showed that a coordination of water molecules to framework Al atoms occurred in many cases, especially in the vicinity of the Al-O-Al linkages, sometimes resulting in a pronounced modification of the linkages through additional bridging oxygen atoms. Given the changes in the local structure, it can be expected that such modified linkages are especially prone to break upon dehydration. Thus, in addition to elucidating the deprotonation behaviour of protons associated with different types of linkages, the calculations also provide insights into possible reasons for the instability of Al-O-Al linkages, clarifying why Löwenstein’s rule is mostly obeyed in materials that are formed via a hydrothermal route.</p>



2020 ◽  
Author(s):  
Eric Greve ◽  
Jacob D. Porter ◽  
Chris Dockendorff

Dual amine/pi Lewis acid catalyst systems have been reported for intramolecular direct additions of aldehydes/ketones to unactivated alkynes and occasionally alkenes, but related intermolecular reactions are rare and not presently of significant synthetic utility, likely due to undesired coordination of enamine intermediates to the metal catalyst. We reasoned that bulky metal ligands and bulky amine catalysts could minimize catalyst poisoning and could facilitate certain examples of direct intermolecular additions of aldehyde/ketones to alkenes/alkynes. Density Functional Theory (DFT) calculations were performed that suggested that PyBOX-Pt(II) catalysts for alkene/alkyne activation could be combined with MacMillan’s imidazolidinone organocatalyst for aldehyde/ketone activation to facilitate desirable C-C bond formations, and certain reactions were calculated to be more exergonic than catalyst poisoning pathways. As calculated, preformed enamines generated from the MacMillan imidazolidinone did not displace ethylene from a biscationic (<i>t</i>-Bu)PyBOX-Pt<sup>2+</sup>complex, but neither were the desired C-C bond formations observed under several different conditions.



2020 ◽  
Author(s):  
Eric Greve ◽  
Jacob D. Porter ◽  
Chris Dockendorff

Dual amine/pi Lewis acid catalyst systems have been reported for intramolecular direct additions of aldehydes/ketones to unactivated alkynes and occasionally alkenes, but related intermolecular reactions are rare and not presently of significant synthetic utility, likely due to undesired coordination of enamine intermediates to the metal catalyst. We reasoned that bulky metal ligands and bulky amine catalysts could minimize catalyst poisoning and could facilitate certain examples of direct intermolecular additions of aldehyde/ketones to alkenes/alkynes. Density Functional Theory (DFT) calculations were performed that suggested that PyBOX-Pt(II) catalysts for alkene/alkyne activation could be combined with MacMillan’s imidazolidinone organocatalyst for aldehyde/ketone activation to facilitate desirable C-C bond formations, and certain reactions were calculated to be more exergonic than catalyst poisoning pathways. As calculated, preformed enamines generated from the MacMillan imidazolidinone did not displace ethylene from a biscationic (<i>t</i>-Bu)PyBOX-Pt<sup>2+</sup>complex, but neither were the desired C-C bond formations observed under several different conditions.



2011 ◽  
Vol 32 (4) ◽  
pp. 647-651
Author(s):  
Chongcheng CHEN ◽  
Hangrong CHEN ◽  
Jianchang YU ◽  
Zhengqing YE ◽  
Jianlin SHI


2020 ◽  
Vol 17 (2) ◽  
pp. 117-130 ◽  
Author(s):  
Mehdi Kalhor ◽  
Zohre Zarnegar ◽  
Zahra Seyedzade ◽  
Soodabeh Banibairami

Background: SO3H-functionalized zeolite-Y was prepared and used as a catalyst for the synthesis of 2-aryl-N-benzimidazole-4-thiazolidinones and tri-substituted imidazoles at ambient conditions. Objective: The goals of this catalytic method include excellent yields and high purity, inexpensive procedure and ease of product isolation, the use of nontoxic and heterogeneous acid catalyst, shorter reaction times and milder conditions. Materials and Methods: NMR spectra were recorded on Brucker spectrophotometer using Me4Si as internal standard. Mass spectra were recorded on an Agilent Technology 5975C VL MSD with tripe-axis detector. FTIR spectra were obtained with KBr disc on a galaxy series FT-IR 5000 spectrometer. The surface morphology of nanostructures was analyzed by FE-SEM (EVO LS 10, Zeiss, Carl Zeiss, Germany). BET analysis were measured at 196 °C by a Japan Belsorb II system after the samples were vacuum dried at 150°C overnight. Results: The NSZ was characterized by FT-IR, FESEM, EDX, XRF, and BET. The catalytic activity of NSZ was investigated for synthesis of 1,3-tiazolidin-4-ones in H2O/Acetone at room temperature. Moreover, NSZ was used for synthesis of tri-substituted imidazoles at 60 °C via solvent-free condensation. Different kinds of aromatic aldehydes were converted to the corresponding of products with good to excellent yields. Conclusion: Sulfonated zeolite-Y was as an efficient catalyst for the preparation of N-benzimidazole-2-aryl-1,3- thiazolidin-4-ones and 2,4,5-triaryl-1H-imidazoles. High reaction rates, elimination toxic solvent, simple experimental procedure and reusability of the catalyst are the important features of this protocol.



2020 ◽  
Vol 17 ◽  
Author(s):  
Kalyani K. ◽  
Srinivasa Reddy Kallam

Abstract:: An efficient synthesis of 2-substituted Quinazolin-4(3H)-ones has been developed from isatoic anhydride with various amidoximes by using recyclable polymer supported sulphonic acid catalyst. Excellent functional group compatibil-ity and high yields are the important features of this protocol.



Author(s):  
Feng Wu ◽  
Fei Qiu ◽  
Siew Anthony Wai-Keong ◽  
Yong Diao

Background: In recent years, the emergence of stimuli-responsive nanoparticles makes drug delivery more efficient. As an intelligent and effective targeted delivery platform, it can reduce the side effects generated during drug transportation while enhancing the treatment efficacy. The stimuli-responsive nanoparticles can respond to different stimuli at corresponding times and locations to deliver and release their drugs and associated therapeutic effects. Objective: This review aims to inform researchers on the latest advances in the application of dual-stimuli responsive nanoparticles in precise drug delivery, with special attention to their design, drug release properties, and therapeutic effects. Syntheses of nanoparticles with simultaneous or sequential responses to two or more stimuli (pH-redox, pH-light, redoxlight, temperature-magnetic, pH-redox-temperature, redox-enzyme-light, etc.) and the applications of such responsivity properties for drugs control and release have become a hot topic of recent research. Methods: A database of relevant information for the production of this review was sourced, screened and analyzed from Pubmed, Web of Science, SciFinder by searching for the following keywords: “dual-stimuli responsive”, “controlled release”, “cancer therapy”, “synergistic treatment”. Results: Notably, the nanoparticles with dual-stimuli responsive function have an excellent control effect on drug delivery and release, playing a crucial part in the treatment of tumors. They can improve the encapsulation and delivery efficiency of hydrophobic chemotherapy drugs, combine chemo-photothermal therapies, apply imaging function in the diagnosis of tumors and even conduct multi-drugs delivery to overcome multi-drugs resistance (MDR). Conclusion: With the development of smart dual-stimuli responsive nanoparticles, cancer treatment methods will become more diverse and effective. All the stimuli-responsive nanoparticles functionalities exhibited their characteristics individually within the single nanosystem.



Author(s):  
Charishma Venkata Sai Anne ◽  
Karthikeyan S. ◽  
Arun C.

Background: Waste biomass derived reusable heterogeneous acid based catalysts are more suitable to overcome the problems associated with homogeneous catalysts. The use of agricultural biomass as catalyst for transesterification process is more economical and it reduces the overall production cost of biodiesel. The identification of an appropriate suitable catalyst for effective transesterification will be a landmark in biofuel sector Objective: In the present investigation, waste wood biomass was used to prepare a low cost sulfonated solid acid catalyst for the production of biodiesel using waste cooking oil. Methods: The pretreated wood biomass was first calcined then sulfonated with H2SO4. The catalyst was characterized by various analyses such as, Fourier-transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS) and X-ray diffraction (XRD). The central composite design (CCD) based response surface methodology (RSM) was applied to study the influence of individual process variables such as temperature, catalyst load, methanol to oil molar ration and reaction time on biodiesel yield. Results: The obtained optimized conditions are as follows: temperature (165 ˚C), catalyst loading (1.625 wt%), methanol to oil molar ratio (15:1) and reaction time (143 min) with a maximum biodiesel yield of 95 %. The Gas chromatographymass spectrometry (GC-MS) analysis of biodiesel produced from waste cooking oil was showed that it has a mixture of both monounsaturated and saturated methyl esters. Conclusion: Thus the waste wood biomass derived heterogeneous catalyst for the transesterification process of waste cooking oil can be applied for sustainable biodiesel production by adding an additional value for the waste materials and also eliminating the disposable problem of waste oils.



Sign in / Sign up

Export Citation Format

Share Document