Duplex trapping and charge transfer with polysulfides by a diketopyrrolopyrrole-based organic framework for high-performance lithium–sulfur batteries

2019 ◽  
Vol 7 (30) ◽  
pp. 18100-18108 ◽  
Author(s):  
Jie Xu ◽  
Shiming Bi ◽  
Weiqiang Tang ◽  
Qi Kang ◽  
Dongfang Niu ◽  
...  
Keyword(s):  
Charge Transfer ◽  
High Performance ◽  
High Capacity ◽  
High Rate ◽  
Capacity Retention ◽  
Shuttle Effect ◽  
High Sulfur Content ◽  
Lithium Sulfur Batteries ◽  
Active Substances ◽  
Lithium Sulfur

The duplex trapping behavior between a DPP-based POF and polysulfides is propitious for maintaining active substances and restricting the shuttle effect, realizing Li–S batteries with high rate, high sulfur content and high capacity retention.

scholarly journals Sandwiching Sulfur into the Dents Between N, O Co-Doped Graphene Layered Blocks with Strong Physicochemical Confinements for Stable and High-Rate Li–S Batteries

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Mengjiao Shi ◽  
Su Zhang ◽  
Yuting Jiang ◽  
Zimu Jiang ◽  
Longhai Zhang ◽  
...  
Keyword(s):  
High Performance ◽  
High Capacity ◽  
High Rate ◽  
Graphene Sheets ◽  
Rate Performance ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Doped Graphene ◽  
Sulfur Host ◽  
Co Doped

AbstractThe development of lithium–sulfur batteries (LSBs) is restricted by their poor cycle stability and rate performance due to the low conductivity of sulfur and severe shuttle effect. Herein, an N, O co-doped graphene layered block (NOGB) with many dents on the graphene sheets is designed as effective sulfur host for high-performance LSBs. The sulfur platelets are physically confined into the dents and closely contacted with the graphene scaffold, ensuring structural stability and high conductivity. The highly doped N and O atoms can prevent the shuttle effect of sulfur species by strong chemical adsorption. Moreover, the micropores on the graphene sheets enable fast Li+ transport through the blocks. As a result, the obtained NOGB/S composite with 76 wt% sulfur content shows a high capacity of 1413 mAh g−1 at 0.1 C, good rate performance of 433 mAh g−1 at 10 C, and remarkable stability with 526 mAh g−1 at after 1000 cycles at 1 C (average decay rate: 0.038% per cycle). Our design provides a comprehensive route for simultaneously improving the conductivity, ion transport kinetics, and preventing the shuttle effect in LSBs.

scholarly journals Construction of Electrocatalytic and Heat-Resistant Self-Supporting Electrodes for High-Performance Lithium–Sulfur Batteries

2019 ◽  
Vol 11 (1) ◽  
Author(s):  
Xuemei Zhang ◽  
Yunhong Wei ◽  
Boya Wang ◽  
Mei Wang ◽  
Yun Zhang ◽  
...  
Keyword(s):  
Elevated Temperature ◽  
High Performance ◽  
Structural Engineering ◽  
Utilization Efficiency ◽  
High Rate ◽  
Shuttle Effect ◽  
Electrocatalytic Effect ◽  
Lithium Sulfur Batteries ◽  
Engineering Strategy ◽  
Lithium Sulfur

Abstract Boosting the utilization efficiency of sulfur electrodes and suppressing the “shuttle effect” of intermediate polysulfides remain the critical challenge for high-performance lithium–sulfur batteries (LSBs). However, most of reported sulfur electrodes are not competent to realize the fast conversion of polysulfides into insoluble lithium sulfides when applied with high sulfur loading, as well as to mitigate the more serious shuttle effect of polysulfides, especially when worked at an elevated temperature. Herein, we reported a unique structural engineering strategy of crafting a unique hierarchical multifunctional electrode architecture constructed by rooting MOF-derived CoS2/carbon nanoleaf arrays (CoS2–CNA) into a nitrogen-rich 3D conductive scaffold (CTNF@CoS2–CNA) for LSBs. An accelerated electrocatalytic effect and improved polysulfide redox kinetics arising from CoS2–CNA were investigated. Besides, the strong capillarity effect and chemisorption of CTNF@CoS2–CNA to polysulfides enable high loading and efficient utilization of sulfur, thus leading to high-performance LIBs performed not only at room temperature but also up to an elevated temperature (55 °C). Even with the ultrahigh sulfur loading of 7.19 mg cm−2, the CTNF@CoS2–CNA/S cathode still exhibits high rate capacity at 55 °C.

scholarly journals Facile synthesis of sulfur@titanium carbide Mxene as high performance cathode for lithium-sulfur batteries

Nanophotonics ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 2025-2032
Author(s):  
Fan Zhang ◽  
Yunlei Zhou ◽  
Yi Zhang ◽  
Dongchan Li ◽  
Zhichao Huang
Keyword(s):  
Titanium Carbide ◽  
High Performance ◽  
High Capacity ◽  
Shuttle Effect ◽  
Lithium Polysulfide ◽  
Lithium Sulfur Batteries ◽  
Potential Applications ◽  
Sulfur Hosts ◽  
Lithium Sulfur ◽  
Sulfur Nanoparticles

AbstractThe design of sulfur hosts with polar, sulfurphilic, and conductive network is critical to lithium-sulfur (Li-S) batteries whose potential applications are greatly limited by the lithium polysulfide shuttle effect. Mxenes, possessing layered-stacked structures and high electrical conductivities, have a great potential in sulfur hosts. Herein, sulfur nanoparticles uniformly decorated on titanium carbide Mxene (S@Ti3C2Tx Mxene) are synthesized via a hydrothermal method and then utilized as a cathode for lithium-sulfur batteries. This unique architecture could accommodate sulfur nanoparticles expansion during cycling, suppress the shuttling of lithium polysulfide, and enhance electronical conductivity. Consequently, the S@Mxene with a high areal sulfur loading (∼4.0 mg cm−2) exhibits a high capacity (1477.2 mAh g−1) and a low capacity loss per cycle of 0.18% after 100 cycles at 0.2 C. This work may shed lights on the development of high performance sulfur-based cathode materials for Li-S batteries.

scholarly journals Dual-Atoms Iron Sites Boost the Kinetics of Reversible Conversion of Polysulfide for High-Performance Lithium-Sulfur Batteries

2021 ◽  
Author(s):  
Yue Qiu ◽  
Xun Sun ◽  
Maoxu Wang ◽  
Xian Wu ◽  
Bo Jiang ◽  
...  
Keyword(s):  
High Performance ◽  
Iron Catalyst ◽  
High Rate ◽  
Single Atom ◽  
Efficient Catalyst ◽  
Shuttle Effect ◽  
Adsorption Structure ◽  
Lithium Sulfur Batteries ◽  
Kinetics Of ◽  
Lithium Sulfur

Abstract Atomically dispersed metal catalysts have offered significant potential for accelerating sluggish kinetics of transformation of lithium polysulfide(LiPS) and inhibiting the shuttle effect to achieve the long-life cycling and high rate of lithium sulfur batteries. However, the end-on adsorption structure between single metal site and polysulfide limits the adsorption capacity and catalytic activity of single atom catalysts. Here, we construct dual-atoms iron sites on nitrogen doped graphene to serve as highly efficient catalyst for lithium sulfur batteries. As expected, the dual-atoms sites can firmly bound polysulfides by forming double Fe-S bonds between polysulfides and the two adjacent iron atoms. Such double-bond adsorption structure is also favorable for the electron transfer and polysulfides activation, so as to reduce the energy barrier and accelerate the reaction kinetics. As a result, the as-obtained dual-atoms iron catalyst can effectively alleviate the shuttle effect and improve the utilization of active sulfur, thus the batteries present high initial capacity of 1615 mAh g-1 at 0.05 C and long-cycle life with a decay rate per cycle as low as 0.015% at 2C over 1000 cycles.

scholarly journals Ultrasmall titanium oxide/titanium oxynitride composite nanoparticle-embedded carbon nanofiber mats as high-capacity and free-standing electrodes for lithium sulfur batteries

RSC Advances ◽  
2017 ◽  
Vol 7 (71) ◽  
pp. 44804-44808 ◽  
Author(s):  
Cho-Long Lee ◽  
Chanhoon Kim ◽  
Il-Doo Kim
Keyword(s):  
High Performance ◽  
Carbon Nanofiber ◽  
High Capacity ◽  
Reversible Capacity ◽  
Free Standing ◽  
Capacity Retention ◽  
High Reversible Capacity ◽  
Lithium Sulfur Batteries ◽  
Nanofiber Mats ◽  
Lithium Sulfur

TiO2/TiOxNynanoparticles loaded CNFs have been synthesized as free-standing electrodes for high performance lithium–sulfur batteries, showing high reversible capacity of 1107 mA h g−1after 100 cycles at 1C with superior capacity retention of 85%.

Three-in-one cathode host based on Nb3O8/graphene superlattice heterostructures for high-performance Li–S batteries

2021 ◽  
Author(s):  
Chenhui WANG ◽  
Nobuyuki Sakai ◽  
Yasuo Ebina ◽  
Takayuki KIKUCHI ◽  
Monika Snowdon ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Next Generation ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Graphene Superlattice ◽  
Lithium Sulfur

Lithium-sulfur batteries have high promise for application in next-generation energy storage. However, further advances have been hindered by various intractable challenges, particularly three notorious problems: the “shuttle effect”, sluggish kinetics...

scholarly journals Effective ion pathways and 3D conductive carbon networks in bentonite host enable stable and high-rate lithium–sulfur batteries

2021 ◽  
Vol 10 (1) ◽  
pp. 20-33
Author(s):  
Lian Wu ◽  
Yongqiang Dai ◽  
Wei Zeng ◽  
Jintao Huang ◽  
Bing Liao ◽  
...  
Keyword(s):  
Network Architecture ◽  
High Performance ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
High Rate ◽  
Lithium Sulfur Batteries ◽  
Carbon Networks ◽  
Carbon Coated ◽  
Lithium Sulfur ◽  
Initial Capacity

Abstract Fast charge transfer and lithium-ion transport in the electrodes are necessary for high performance Li–S batteries. Herein, a N-doped carbon-coated intercalated-bentonite (Bent@C) with interlamellar ion path and 3D conductive network architecture is designed to improve the performance of Li–S batteries by expediting ion/electron transport in the cathode. The interlamellar ion pathways are constructed through inorganic/organic intercalation of bentonite. The 3D conductive networks consist of N-doped carbon, both in the interlayer and on the surface of the modified bentonite. Benefiting from the unique structure of the Bent@C, the S/Bent@C cathode exhibits a high initial capacity of 1,361 mA h g−1 at 0.2C and achieves a high reversible capacity of 618.1 m Ah g−1 at 2C after 500 cycles with a sulfur loading of 2 mg cm−2. Moreover, with a higher sulfur loading of 3.0 mg cm−2, the cathode still delivers a reversible capacity of 560.2 mA h g−1 at 0.1C after 100 cycles.

scholarly journals Co-W Bimetallic Carbides as Sulfur Host for High-Performance Lithium–Sulfur Batteries

2021 ◽  
Author(s):  
Dongke Zhang ◽  
Ting Huang ◽  
Pengfei Zhao ◽  
Ze Zhang ◽  
Xingtao Qi ◽  
...  
Keyword(s):  
High Performance ◽  
Conductive Network ◽  
Rate Performance ◽  
Cycle Stability ◽  
Sulfur Cathode ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Sulfur Host ◽  
Lithium Sulfur ◽  
Excellent Stability

Abstract Due to the low conductivity of sulfur and the dissolution of polysulfides, the research and application of lithium-sulfur (Li-S) batteries have encountered certain resistance. Increasing conductivity and introducing polarity into the sulfur host can effectively overcome these long-standing problems. Herein, We first prepared Co3W3C@ C@ CNTs / S material and used it in the cathode of lithium-sulfur batteries, The existence of carboxylated CNTs can form a conductive network, accelerate the transmission of electrons and improve the rate performance, and polar Co3W3C can form a strong interaction with polysulfide intermediates, effectively inhibiting its shuttle effect, improving the utilization of sulfur cathode electrodes, and improving the capacity and cycle stability. The Co3W3C@C@CNTs / S electrode material has a capacity of 1,093 mA h g-1 at a 0.1 A g− 1 and 482 mA h g-1 at 5 A g− 1. Even after 500 cycles of 2 A g− 1, the capacity of each cycle is only reduced by 0.08%. The excellent stability of this material can provide a new idea for the future development of lithium-sulfur batteries.

Novel melamine-based porous organic polymers: synthesis, characterizations, morphology modifications, and their applications in lithium-sulfur batteries

2021 ◽  
Author(s):  
Haiyang Liu ◽  
Jiaxing Wang ◽  
Miao SUN ◽  
Yu Wang ◽  
Runing Zhao ◽  
...  
Keyword(s):  
High Performance ◽  
Rational Design ◽  
Specific Capacity ◽  
High Capacity ◽  
Lithium Ion ◽  
Organic Polymer ◽  
Energy Storage Devices ◽  
Shuttle Effect ◽  
Physical Constraints ◽  
Lithium Sulfur

Abstract Lithium-sulfur (Li-S) batteries have been considered to be one of the most promising energy storage devices in the next generation. However, the insulating properties of sulfur and the shuttle effect of soluble lithium polysulfides (LiPSs) seriously hinder the practical application of Li-S batteries. In this paper, a novel porous organic polymer (HUT3) was prepared based on the polycondensation between melamine and 1,4-phenylene diisocyanate. The micro morphology of HUT3 was improved by in-situ growth on different mass fractions of rGO (5%, 10%, 15%), and the obtained HUT3-rGO composites were employed as sulfur carriers in Li-S batteries with promoted the sulfur loading ratio and lithium ion mobility. Attributed to the synergistic effect of the chemisorption of polar groups and the physical constraints of HUT3 structure, HUT3-rGO/S electrodes exhibits excellent capacity and cyclability performance. For instance, HUT3-10rGO/S electrode exhibits a high initial specific capacity of 950 mAh g-1 at 0.2 C and retains a high capacity of 707 mAh g-1 after 500 cycles at 1 C. This work emphasizes the importance of the rational design of the chemical structure and opens up a simple way for the development of cathode materials suitable for high-performance Li-S batteries.

Nitrogen doped porous carbon fiber/vertical graphene as efficient polysulfide conversion catalyst for high performance lithium sulfur batteries

2021 ◽  
Author(s):  
junsheng lin ◽  
Yangcheng Mo ◽  
Shiwen Li ◽  
Jie Yu
Keyword(s):  
High Performance ◽  
Practical Application ◽  
Nitrogen Doped ◽  
High Sulfur Content ◽  
Slow Kinetics ◽  
Lithium Sulfur Batteries ◽  
Conversion Catalyst ◽  
Kinetics Of ◽  
Lithium Sulfur ◽  
High Sulfur Loading

Under high sulfur loading, high sulfur content and low electrolyte/sulfur ratio (E/S), the practical application of lithium sulfur (Li–S) batteries is seriously limited by the negative and slow kinetics of...

Sign in / Sign up

Export Citation Format

Share Document