scholarly journals Facile synthesis of sulfur@titanium carbide Mxene as high performance cathode for lithium-sulfur batteries

Nanophotonics ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 2025-2032
Author(s):  
Fan Zhang ◽  
Yunlei Zhou ◽  
Yi Zhang ◽  
Dongchan Li ◽  
Zhichao Huang
Keyword(s):  
Titanium Carbide ◽  
High Performance ◽  
High Capacity ◽  
Shuttle Effect ◽  
Lithium Polysulfide ◽  
Lithium Sulfur Batteries ◽  
Potential Applications ◽  
Sulfur Hosts ◽  
Lithium Sulfur ◽  
Sulfur Nanoparticles

AbstractThe design of sulfur hosts with polar, sulfurphilic, and conductive network is critical to lithium-sulfur (Li-S) batteries whose potential applications are greatly limited by the lithium polysulfide shuttle effect. Mxenes, possessing layered-stacked structures and high electrical conductivities, have a great potential in sulfur hosts. Herein, sulfur nanoparticles uniformly decorated on titanium carbide Mxene (S@Ti3C2Tx Mxene) are synthesized via a hydrothermal method and then utilized as a cathode for lithium-sulfur batteries. This unique architecture could accommodate sulfur nanoparticles expansion during cycling, suppress the shuttling of lithium polysulfide, and enhance electronical conductivity. Consequently, the S@Mxene with a high areal sulfur loading (∼4.0 mg cm−2) exhibits a high capacity (1477.2 mAh g−1) and a low capacity loss per cycle of 0.18% after 100 cycles at 0.2 C. This work may shed lights on the development of high performance sulfur-based cathode materials for Li-S batteries.

Sulfur nanoparticles/Ti3C2Tx MXene with optimum sulfur content as cathode for highly stable lithium-sulfur batteries

2021 ◽  
Author(s):  
Aoning Wang ◽  
Yixuan Chen ◽  
Li Liu ◽  
Xiang Liu ◽  
Zhoulu Wang ◽  
...  
Keyword(s):  
Energy Density ◽  
Titanium Carbide ◽  
Capacity Fading ◽  
Shuttle Effect ◽  
Host Materials ◽  
Lithium Polysulfide ◽  
Lithium Sulfur Batteries ◽  
Sulfur Host ◽  
Lithium Sulfur ◽  
Sulfur Nanoparticles

Lithium-sulfur batteries have high theoretical energy density, but they need better sulfur host materials to retain lithium polysulfide shuttle effect which result in batteries’ capacity fading. Titanium carbide MXene (Ti3C2Tx...

Understanding the high-performance Fe(OH)3@GO nanoarchitecture as effective sulfur hosts for the high capacity of lithium-sulfur batteries

2021 ◽  
Vol 538 ◽  
pp. 148032 ◽  
Author(s):  
Mohammed A. Al-Tahan ◽  
Yutao Dong ◽  
Ran Zhang ◽  
Yingying Zhang ◽  
Jianmin Zhang
Keyword(s):  
High Performance ◽  
High Capacity ◽  
Lithium Sulfur Batteries ◽  
Sulfur Hosts ◽  
Lithium Sulfur

Cubic MnSe2 microcube enabling high-performance sulfur cathode for lithium-sulfur batteries

2021 ◽  
Author(s):  
Jian Bao ◽  
Xin-Yang Yue ◽  
Rui-Jie Luo ◽  
Yong-Ning Zhou
Keyword(s):  
Strong Interaction ◽  
High Performance ◽  
Sulfur Cathode ◽  
Shuttle Effect ◽  
Lithium Polysulfide ◽  
Lithium Sulfur Batteries ◽  
Sulfur Cathodes ◽  
Lithium Sulfur

Cubic MnSe2 microcubes are introduced into sulfur cathodes to prevent the shuttle effect of lithium polysulfide through binding with polysulfide via the strong interaction between Se and S, thus alleviate...

scholarly journals WO3 Nanowire/Carbon Nanotube Interlayer as a Chemical Adsorption Mediator for High-Performance Lithium-Sulfur Batteries

Molecules ◽  
2021 ◽  
Vol 26 (2) ◽  
pp. 377
Author(s):  
Sang-Kyu Lee ◽  
Hun Kim ◽  
Sangin Bang ◽  
Seung-Taek Myung ◽  
Yang-Kook Sun
Keyword(s):  
Structural Stability ◽  
High Performance ◽  
High Capacity ◽  
Chemical Adsorption ◽  
Electrochemical Testing ◽  
Lithium Polysulfide ◽  
Lithium Sulfur Batteries ◽  
A Cell ◽  
Catalytic Effects ◽  
Lithium Sulfur

We developed a new nanowire for enhancing the performance of lithium-sulfur batteries. In this study, we synthesized WO3 nanowires (WNWs) via a simple hydrothermal method. WNWs and one-dimensional materials are easily mixed with carbon nanotubes (CNTs) to form interlayers. The WNW interacts with lithium polysulfides through a thiosulfate mediator, retaining the lithium polysulfide near the cathode to increase the reaction kinetics. The lithium-sulfur cell achieves a very high initial discharge capacity of 1558 and 656 mAh g−1 at 0.1 and 3 C, respectively. Moreover, a cell with a high sulfur mass loading of 4.2 mg cm−2 still delivers a high capacity of 1136 mAh g−1 at a current density of 0.2 C and it showed a capacity of 939 mAh g−1 even after 100 cycles. The WNW/CNT interlayer maintains structural stability even after electrochemical testing. This excellent performance and structural stability are due to the chemical adsorption and catalytic effects of the thiosulfate mediator on WNW.

scholarly journals Properties of S-Functionalized Nitrogen-Based MXene (Ti2NS2) as a Hosting Material for Lithium-Sulfur Batteries

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2478
Author(s):  
Chenghao Yao ◽  
Wei Li ◽  
Kang Duan ◽  
Chen Zhu ◽  
Jinze Li ◽  
...  
Keyword(s):  
High Performance ◽  
Specific Capacity ◽  
Host Material ◽  
Sulfur Cathode ◽  
Shuttle Effect ◽  
Lithium Polysulfide ◽  
Lithium Sulfur Batteries ◽  
Calculation Results ◽  
Adsorption Energies ◽  
Lithium Sulfur

Lithium-sulfur (Li-S) batteries have received extensive attention due to their high theoretical specific capacity and theoretical energy density. However, their commercialization is hindered by the shuttle effect caused by the dissolution of lithium polysulfide. To solve this problem, a method is proposed to improve the performance of Li-S batteries using Ti2N(Ti2NS2) with S-functional groups as the sulfur cathode host material. The calculation results show that due to the mutual attraction between Li and S atoms, Ti2NS2 has the moderate adsorption energies for Li2Sx species, which is more advantageous than Ti2NO2 and can effectively inhibit the shuttle effect. Therefore, Ti2NS2 is a potential cathode host material, which is helpful to improve the performance of Li-S batteries. This work provides a reference for the design of high-performance sulfur cathode materials.

Duplex trapping and charge transfer with polysulfides by a diketopyrrolopyrrole-based organic framework for high-performance lithium–sulfur batteries

2019 ◽  
Vol 7 (30) ◽  
pp. 18100-18108 ◽  
Author(s):  
Jie Xu ◽  
Shiming Bi ◽  
Weiqiang Tang ◽  
Qi Kang ◽  
Dongfang Niu ◽  
...  
Keyword(s):  
Charge Transfer ◽  
High Performance ◽  
High Capacity ◽  
High Rate ◽  
Capacity Retention ◽  
Shuttle Effect ◽  
High Sulfur Content ◽  
Lithium Sulfur Batteries ◽  
Active Substances ◽  
Lithium Sulfur

The duplex trapping behavior between a DPP-based POF and polysulfides is propitious for maintaining active substances and restricting the shuttle effect, realizing Li–S batteries with high rate, high sulfur content and high capacity retention.

Three-in-one cathode host based on Nb3O8/graphene superlattice heterostructures for high-performance Li–S batteries

2021 ◽  
Author(s):  
Chenhui WANG ◽  
Nobuyuki Sakai ◽  
Yasuo Ebina ◽  
Takayuki KIKUCHI ◽  
Monika Snowdon ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Next Generation ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Graphene Superlattice ◽  
Lithium Sulfur

Lithium-sulfur batteries have high promise for application in next-generation energy storage. However, further advances have been hindered by various intractable challenges, particularly three notorious problems: the “shuttle effect”, sluggish kinetics...

scholarly journals Co-W Bimetallic Carbides as Sulfur Host for High-Performance Lithium–Sulfur Batteries

2021 ◽  
Author(s):  
Dongke Zhang ◽  
Ting Huang ◽  
Pengfei Zhao ◽  
Ze Zhang ◽  
Xingtao Qi ◽  
...  
Keyword(s):  
High Performance ◽  
Conductive Network ◽  
Rate Performance ◽  
Cycle Stability ◽  
Sulfur Cathode ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Sulfur Host ◽  
Lithium Sulfur ◽  
Excellent Stability

Abstract Due to the low conductivity of sulfur and the dissolution of polysulfides, the research and application of lithium-sulfur (Li-S) batteries have encountered certain resistance. Increasing conductivity and introducing polarity into the sulfur host can effectively overcome these long-standing problems. Herein, We first prepared Co3W3C@ C@ CNTs / S material and used it in the cathode of lithium-sulfur batteries, The existence of carboxylated CNTs can form a conductive network, accelerate the transmission of electrons and improve the rate performance, and polar Co3W3C can form a strong interaction with polysulfide intermediates, effectively inhibiting its shuttle effect, improving the utilization of sulfur cathode electrodes, and improving the capacity and cycle stability. The Co3W3C@C@CNTs / S electrode material has a capacity of 1,093 mA h g-1 at a 0.1 A g− 1 and 482 mA h g-1 at 5 A g− 1. Even after 500 cycles of 2 A g− 1, the capacity of each cycle is only reduced by 0.08%. The excellent stability of this material can provide a new idea for the future development of lithium-sulfur batteries.

Novel melamine-based porous organic polymers: synthesis, characterizations, morphology modifications, and their applications in lithium-sulfur batteries

2021 ◽  
Author(s):  
Haiyang Liu ◽  
Jiaxing Wang ◽  
Miao SUN ◽  
Yu Wang ◽  
Runing Zhao ◽  
...  
Keyword(s):  
High Performance ◽  
Rational Design ◽  
Specific Capacity ◽  
High Capacity ◽  
Lithium Ion ◽  
Organic Polymer ◽  
Energy Storage Devices ◽  
Shuttle Effect ◽  
Physical Constraints ◽  
Lithium Sulfur

Abstract Lithium-sulfur (Li-S) batteries have been considered to be one of the most promising energy storage devices in the next generation. However, the insulating properties of sulfur and the shuttle effect of soluble lithium polysulfides (LiPSs) seriously hinder the practical application of Li-S batteries. In this paper, a novel porous organic polymer (HUT3) was prepared based on the polycondensation between melamine and 1,4-phenylene diisocyanate. The micro morphology of HUT3 was improved by in-situ growth on different mass fractions of rGO (5%, 10%, 15%), and the obtained HUT3-rGO composites were employed as sulfur carriers in Li-S batteries with promoted the sulfur loading ratio and lithium ion mobility. Attributed to the synergistic effect of the chemisorption of polar groups and the physical constraints of HUT3 structure, HUT3-rGO/S electrodes exhibits excellent capacity and cyclability performance. For instance, HUT3-10rGO/S electrode exhibits a high initial specific capacity of 950 mAh g-1 at 0.2 C and retains a high capacity of 707 mAh g-1 after 500 cycles at 1 C. This work emphasizes the importance of the rational design of the chemical structure and opens up a simple way for the development of cathode materials suitable for high-performance Li-S batteries.

scholarly journals Sandwiching Sulfur into the Dents Between N, O Co-Doped Graphene Layered Blocks with Strong Physicochemical Confinements for Stable and High-Rate Li–S Batteries

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Mengjiao Shi ◽  
Su Zhang ◽  
Yuting Jiang ◽  
Zimu Jiang ◽  
Longhai Zhang ◽  
...  
Keyword(s):  
High Performance ◽  
High Capacity ◽  
High Rate ◽  
Graphene Sheets ◽  
Rate Performance ◽  
Shuttle Effect ◽  
Lithium Sulfur Batteries ◽  
Doped Graphene ◽  
Sulfur Host ◽  
Co Doped

AbstractThe development of lithium–sulfur batteries (LSBs) is restricted by their poor cycle stability and rate performance due to the low conductivity of sulfur and severe shuttle effect. Herein, an N, O co-doped graphene layered block (NOGB) with many dents on the graphene sheets is designed as effective sulfur host for high-performance LSBs. The sulfur platelets are physically confined into the dents and closely contacted with the graphene scaffold, ensuring structural stability and high conductivity. The highly doped N and O atoms can prevent the shuttle effect of sulfur species by strong chemical adsorption. Moreover, the micropores on the graphene sheets enable fast Li+ transport through the blocks. As a result, the obtained NOGB/S composite with 76 wt% sulfur content shows a high capacity of 1413 mAh g−1 at 0.1 C, good rate performance of 433 mAh g−1 at 10 C, and remarkable stability with 526 mAh g−1 at after 1000 cycles at 1 C (average decay rate: 0.038% per cycle). Our design provides a comprehensive route for simultaneously improving the conductivity, ion transport kinetics, and preventing the shuttle effect in LSBs.

Sign in / Sign up

Export Citation Format

Share Document