scholarly journals Influence of A Site Cation on Nonlinear Band Gap Dependence of 2D Ruddlesden-Popper A2Pb1−xSnxI4 Perovskites

2021 ◽  
Author(s):  
Cameron Christopher Lloyd Underwood ◽  
David Carey ◽  
S. Ravi P. Silva

Ruddlesden-Popper phase (RPP) perovskites of the form A1n−1A22BnX3n+1 show great promise in stable photovoltaic (PV) devices or as light emitting diodes (LEDs). In particular, n= 1, mono-layer RPPs of the...

RSC Advances ◽  
2013 ◽  
Vol 3 (12) ◽  
pp. 3829 ◽  
Author(s):  
Jie Zhang ◽  
Kai Zhang ◽  
Shengjian Liu ◽  
Aihui Liang ◽  
Xuelong Huang ◽  
...  

2021 ◽  
Vol 10 (1) ◽  
pp. 465-477
Author(s):  
Longshi Rao ◽  
Qing Zhang ◽  
Mingfu Wen ◽  
Zhongfa Mao ◽  
Huaxian Wei ◽  
...  

Abstract White light-emitting diodes (WLEDs) hold great promise in lighting, display, and visible light communication devices, and single-component white emission carbon quantum dots (SCWE-CQDs) as the key component of WLEDs have many outstanding advantages. However, rapid and efficient synthesis of SCWE-CQDs with high photoluminescence quantum yield (PLQY) and stability remains challenging. Here, we report a novel solvent engineering strategy to obtain highly photoluminescent SCWE-CQDs by controlling the dilution ratios between N,N-dimethylformamide (DMF) and pristine red carbon quantum dots (RCQDs) solution. By optimizing synthesis conditions, the relative PLQY of the SCWE-CQDs solution reached 53%. Morphological, structural, and optical property characterizations indicate that the combined action of the hydrogen bond (HB) effect and the size effect leads to the blue shift of RCQDs, but the HB effect is more dominant than the particle size in causing large spectral shifts. In addition, the WLEDs with high color rendering index of 89 and remarkable reliability were obtained based on the highly photoluminescent SCWE-CQDs. This facile solvent engineering approach for synthesizing tunable emission CQDs will promote the progress of carbon-based luminescent materials for applications in optoelectronic devices.


2021 ◽  
Author(s):  
◽  
Rebecca Jane Sutton

<p>Organic light emitting diodes (OLEDs) are an emerging technology based on electrically conducting polymer films, with great promise for large area lighting and flexible ultra-thin displays. However, despite the rapid technological development, there is still a poor understanding of the degradation and spindependent recombination processes that take place inside an OLED. In this thesis, Electron Paramagnetic Resonance (EPR) was used to investigate these processes in blue-emitting OLEDs.  A successful procedure was developed and refined for fabricating OLEDs with the structure ITO/PEDOT:PSS/emissive layer/Al/Ag, with and without the PEDOT:PSS hole-transporting layer. The organic emissive layer was either F8BT, PFO, or PVK:OXD-7:FIrpic (PB). These OLEDs were fabricated in air and with a geometry optimised for EPR experiments. Critical features for satisfactory devices were found to be a sufficiently thick organic layer and minimal exposure to the air.  A compact apparatus was developed for simultaneous light output, current, and voltage measurements on the OLEDs while in an inert glove box environment. Electroluminescence and current-voltage parameters measured for these devices showed predominantly trap-controlled space-charge-limited conduction.   OLEDs with PFO as the emissive layer and with a PEDOT:PSS layer were investigated with conventional, electrically-detected (ED) and optically-detected (OD) EPR techniques. EDEPR and ODEPR signals were observed at ~9.2 GHz and in the low (<50 mT) and high (~330 mT) magnetic field regimes and were found to change markedly with time during operation as the device degraded. The low field signals initially showed a composite broad quenching and superimposed narrow enhancing response centred around zero field strength. These signals were attributed to magneto-resistance (MR) and magneto-electroluminescence (MEL). Following operational ageing, a third, narrow quenching line was observed in the MR and the ratio of the initial two MR responses changed substantially. These effects are tentatively attributed to a hyperfine interaction.  For both EDEPR and ODEPR, quenching high field resonances with a g-value (gyromagnetic ratio) of 2.003±0.001 were observed. The current-quenching resonance gradually diminished during operation and after 4–5 hours was replaced by a current-enhancing resonance. The appearance of this latter resonance could be explained by chemical changes in the OLED due to the diffusion of oxygen through the device from the oxygen-plasma-treated ITO. A working model is proposed which can explain this observed change as spindependent trapping and recombination at free radicals, although the model requires further experimentation to test its validity.</p>


Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 897
Author(s):  
Chang-Yeol Han ◽  
Hyun-Sik Kim ◽  
Heesun Yang

It is the unique size-dependent band gap of quantum dots (QDs) that makes them so special in various applications. They have attracted great interest, especially in optoelectronic fields such as light emitting diodes and photovoltaic cells, because their photoluminescent characteristics can be significantly improved via optimization of the processes by which they are synthesized. Control of their core/shell heterostructures is especially important and advantageous. However, a few challenges remain to be overcome before QD-based devices can completely replace current optoelectronic technology. This Special Issue provides detailed guides for synthesis of high-quality QDs and their applications. In terms of fabricating devices, tailoring optical properties of QDs and engineering defects in QD-related interfaces for higher performance remain important issues to be addressed.


2014 ◽  
Vol 3 (2) ◽  
pp. 185-188 ◽  
Author(s):  
Amanpal Singh ◽  
B. C. Joshi ◽  
Dinesh Kumar ◽  
P. K. Khanna ◽  
Mukesh Kumar

1981 ◽  
Vol 64 (2) ◽  
pp. 697-706 ◽  
Author(s):  
N. B. Lukyanchlkova ◽  
T. M. Pavelko ◽  
G. S. Pekar ◽  
N. N. Tkachenko ◽  
M. K. Sheinkman

Sign in / Sign up

Export Citation Format

Share Document