A facile new modified method for the preparation of a new cerium-doped lanthanium cuperate perovskite energy storage system using nanotechnology

2021 ◽  
Author(s):  
Mervette El Batouti ◽  
H. A. Fetouh
Keyword(s):  
Solar Cells ◽  
Energy Storage ◽  
Dielectric Loss ◽  
Storage Systems ◽  
Low Cost ◽  
Storage System ◽  
Energy Storage System ◽  
Solar Ponds ◽  
Modified Method ◽  
Ferroelectric Perovskite

New ferroelectric perovskite sample: excellent dielectric, negligible dielectric loss for energy storage systems such as solar cells, solar ponds, and thermal collectors has been prepared at low cost using nanotechnology.

scholarly journals Photo-Rechargeable Electric Energy Storage Systems Based on Silicon Solar Cells and Supercapacitor-Engineering Concept

Energies ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3867
Author(s):  
Ireneusz Plebankiewicz ◽  
Krzysztof Artur Bogdanowicz ◽  
Agnieszka Iwan
Keyword(s):  
Solar Cells ◽  
Energy Storage ◽  
Storage Systems ◽  
Storage System ◽  
Electric Energy ◽  
Energy Storage System ◽  
Silicon Solar Cells ◽  
Energy Storage Systems ◽  
Electric Energy Storage ◽  
Engineering Concept

Recently, use of supercapacitors as energy storage systems has attracted considerable attention. However, the literature is scarce of information about the optimization of hybrid systems, using supercapacitors as the main energy storage system. In our study, we focused step-by-step on the engineering concept of a photo-rechargeable energy storage system based on silicon solar cells and supercapacitors. In the first step, based on commercially available elements, we designed a solar charger and simulated its work in idealized conditions. Secondly, we designed appropriate electronic connections and control systems, allowing for the charging–discharging process of the energy storage system. After constructing three type of demonstrators of solar energy charger, we tested it. The novel design allowed us to achieve total available energy from solar panel energy conversion up to 93%.

Modeling of a Low Cost Thermal Energy Storage System to Enhance Generation From Small Hydropower Systems

2017 ◽  
Author(s):  
Peggy P. Ip ◽  
Sammy Houssainy ◽  
H. Pirouz Kavehpour
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Storage Systems ◽  
Low Cost ◽  
Storage System ◽  
Energy Storage System ◽  
Energy Costs ◽  
Distributed Energy ◽  
Small Hydropower ◽  
Distributed Energy Storage

Undeveloped small hydropower generation sites are abundant throughout the water conveyance infrastructure and natural rivers in the United States. Due to its small scale, micro-hydro development requires substantial upfront capital costs, maintenance and operation costs for customized engineering and construction. The significant investments required for developing small hydropower are inhibiting for utilities, residential and commercial users to adopt. An inexpensive energy storage system and a well-designed power controls system can be integrated with small hydropower sites to increase its cost-effectiveness and reliability. This paper introduces the concept of storing low-power generated from small hydro turbines during long off-peak periods and dispatching at high-power as grid-quality electricity during peak periods. The use of an ultra-low cost thermal energy storage (ULCTES) system is examined. Boosting the power output for small hydro generation allows commercial users to avoid significant demand charges during operation, making small hydro an attractive cost saving strategy and therefore breaking down the cost barrier. The ULCTES operates much like a bulk power production unit and a peaker plant, in which it is capable of dispatching constant power over a long period during peak periods when conventional sources are unavailable. Improvements in system reliability and economic value are evaluated using microgrid optimization software HOMER Energy. In particular, two cases are studied with variations in types of end users and energy management goals. Energy costs savings, demand charges savings and renewable energy penetration are determined. Distributed energy storage systems are shown to reduce energy costs and increase the renewable energy penetration for commercial users. With ULCTES, microgrids have the flexibility to manage fluctuating renewable energy generation as well as respond to rapidly changing loads on a daily basis. A larger hydroelectricity system is shown to be more feasible with distributed energy storage systems for isolated users without any connection to the grid.

Modeling an Energy Storage System Based on a Hybrid Renewable Energy System in Stand-alone Applications

2017 ◽  
Vol 68 (11) ◽  
pp. 2641-2645
Author(s):  
Alexandru Ciocan ◽  
Ovidiu Mihai Balan ◽  
Mihaela Ramona Buga ◽  
Tudor Prisecaru ◽  
Mohand Tazerout
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Compressed Air ◽  
Energy Sources ◽  
Energy Storage Systems ◽  
Hybrid Renewable Energy System

The current paper presents an energy storage system that stores the excessive energy, provided by a hybrid system of renewable energy sources, in the form of compressed air and thermal heat. Using energy storage systems together with renewable energy sources represents a major challenge that could ensure the transition to a viable economic future and a decarbonized economy. Thermodynamic calculations are conducted to investigate the performance of such systems by using Matlab simulation tools. The results indicate the values of primary and global efficiencies for various operating scenarios for the energy storage systems which use compressed air as medium storage, and shows that these could be very effective systems, proving the possibility to supply to the final user three types of energy: electricity, heat and cold function of his needs.

Materials Engineering for Adsorption and Catalysis in Room-Temperature Na-S Batteries

2021 ◽  
Author(s):  
Xiang Long Huang ◽  
Yunxiao Wang ◽  
Shulei Chou ◽  
Shi Xue Dou ◽  
Zhiming M. Wang
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Natural Resources ◽  
Room Temperature ◽  
Low Cost ◽  
Storage System ◽  
Energy Storage System ◽  
Electrochemical Energy Storage ◽  
Materials Engineering ◽  
Sodium Sulfur

Room-temperature sodium-sulfur (RT Na-S) batteries constitute an extremely competitive electrochemical energy storage system, owing to their abundant natural resources, low cost, and outstanding energy density, which could potentially overcome the...

scholarly journals Feasibility Analysis of Behind-the-Meter Energy Storage System According to Public Policy on an Electricity Charge Discount Program

2019 ◽  
Vol 11 (1) ◽  
pp. 186 ◽  
Author(s):  
Byuk-Keun Jo ◽  
Seungmin Jung ◽  
Gilsoo Jang
Keyword(s):  
Energy Storage ◽  
Storage Systems ◽  
Storage System ◽  
Participation Rate ◽  
Energy Storage System ◽  
Economic Feasibility ◽  
Demand Side ◽  
Energy Storage Systems ◽  
Study Results ◽  
The Impact

Energy storage systems are crucial in dealing with challenges from the high-level penetration of renewable energy, which has inherently intermittent characteristics. For this reason, various incentive schemes improving the economic profitability of energy storage systems are underway in many countries with an aim to expand the participation rate. The electricity charge discount program, which was introduced in 2015 in Korea, is one of the policies meant to support the economic feasibility of demand-side energy storage systems. This paper quantitatively evaluated the impact of the electricity charge discount program on the economic feasibility of behind-the-meter energy storage systems. In this work, we first summarized how electricity customers can benefit from behind-the-meter energy storage systems. In addition, we represented details of the structure that make up the electricity charge discount program, i.e., how the electricity charge is discounted through the discount scheme. An optimization problem that establishes a charge and discharge schedule of an energy storage system to minimize each consumer’s electricity expenditure was defined and formulated as well. The case study results indicated that the electricity charge discount program has improved the profitability of behind-the-meter energy storage systems, and this improved profitability led to investment in behind-the-meter energy storage systems in Korea. As a result of the electricity charge discount program, Korea’s domestic demand side energy storage system market size, which was only 27 billion dollars in 2015 in Korea, has grown to 825 billion dollars in 2018.

Data Center Energy Conservation by Heat Pipe Cold Energy Storage System

2010 ◽  
Author(s):  
Xiao Ping Wu ◽  
Masataka Mochizuki ◽  
Koichi Mashiko ◽  
Thang Nguyen ◽  
Tien Nguyen ◽  
...  
Keyword(s):  
Energy Storage ◽  
Heat Pipe ◽  
Data Center ◽  
Heat Load ◽  
Data Centers ◽  
Storage Systems ◽  
Storage System ◽  
Energy Storage System ◽  
Energy Storage Systems ◽  
Cold Energy

In this paper, design and economic analysis for applying a novel type of heat pipe into cold energy storage systems have been proposed and discussed. The heat pipe cold energy storage systems can be designed into several types that are ice storage, cold water storage and pre-cool heat exchanger. Those systems can be used for co-operating with conventional chiller system for cooling data centers. The heat load used for discussing in this paper is 8800 kW which represents a large scale data center. The methodology addressed in this paper can be also converted into the middle and small sizes of the data centers. This type of storage system will help to downsize the chiller and decrease its running time that would be able to save significant electricity cost and decrease green house gas emissions from the electricity generation. The proposed systems can be easily connected into the existing conventional systems without major design changes. The analysis in this paper is using Air Freezing Index AFI >= 400 °C-days/year for sizing the heat pipe modules. For the locations where AFI has different value the storage size will be varied accordingly. The paper also addressed a result that an optimum size of cold energy storage system that should be designed at a level to handle 60% of total yearly heat load of a data center.

A Thermodynamic Model of a High Temperature Hybrid Compressed Air Energy Storage System for Grid Storage

2016 ◽  
Author(s):  
Sammy Houssainy ◽  
Reza Baghaei Lakeh ◽  
H. Pirouz Kavehpour
Keyword(s):  
Global Warming ◽  
Energy Storage ◽  
Power Plants ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Compressed Air ◽  
Compressed Air Energy Storage ◽  
Energy Storage Systems

Human activity is overloading our atmosphere with carbon dioxide and other global warming emissions. These emissions trap heat, increase the planet’s temperature, and create significant health, environmental, and climate issues. Electricity production accounts for more than one-third of U.S. global warming emissions, with the majority generated by coal-fired power plants. These plants produce approximately 25 percent of total U.S. global warming emissions. In contrast, most renewable energy sources produce little to no global warming emissions. Unfortunately, generated electricity from renewable sources rarely provides immediate response to electrical demands, as the sources of generation do not deliver a regular supply easily adjustable to consumption needs. This has led to the emergence of storage as a crucial element in the management of energy, allowing energy to be released into the grid during peak hours and meet electrical demands. Compressed air energy storage can potentially allow renewable energy sources to meet electricity demands as reliably as coal-fired power plants. Most compressed air energy storage systems run at very high pressures, which possess inherent problems such as equipment failure, high cost, and inefficiency. This research aims to illustrate the potential of compressed air energy storage systems by illustrating two different discharge configurations and outlining key variables, which have a major impact on the performance of the storage system. Storage efficiency is a key factor to making renewable sources an independent form of sustainable energy. In this paper, a comprehensive thermodynamic analysis of a compressed air energy storage system is presented. Specifically, a detailed study of the first law of thermodynamics of the entire system is presented followed by a thorough analysis of the second law of thermodynamics of the complete system. Details of both discharge and charge cycles of the storage system are presented. The first and second law based efficiencies of the system are also presented along with parametric studies, which demonstrates the effects of various thermodynamic cycle variables on the total round-trip efficiency of compressed air energy storage systems.

scholarly journals Power Distribution Strategy of Microgrid Hybrid Energy Storage System Based on Improved Hierarchical Control

Energies ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 3498 ◽  
Author(s):  
Tiezhou Wu ◽  
Wenshan Yu ◽  
Lujun Wang ◽  
Linxin Guo ◽  
Zhiquan Tang
Keyword(s):  
Energy Storage ◽  
Storage Systems ◽  
Storage System ◽  
Hierarchical Control ◽  
Energy Storage System ◽  
Stable Operation ◽  
Energy Storage Systems ◽  
Hybrid Energy ◽  
Hybrid Energy Storage ◽  
Hybrid Energy Storage System

Traditional hierarchical control of the microgrid does not consider the energy storage status of a distributed hybrid energy storage system. This leads to the inconsistency of the remaining capacity of the energy storage system in the process of system operation, which is not conducive to the safe and stable operation of the system. In this paper, an improved hierarchical control strategy is proposed: the first allocation layer completes the allocation between the distribution energy storage systems considering the state of hybrid energy storage systems, and the second allocation layer realizes the allocation within the hybrid energy storage systems based on variable time constant low-pass filtering. Considering the extreme conditions of energy storage systems, the transfer current is introduced in the second allocation process. The SOC (stage of charge) of the supercapacitor is between 40% and 60%, which ensures that the supercapacitor has enough margin to respond to the power demand. An example of a 300 MW photovoltaic microgrid system in a certain area is analyzed. Compared with the traditional hierarchical control, the proposed control strategy can reduce the SOC change of a hybrid energy storage system by 9% under the same conditions, and make the supercapacitor active after power stabilization, which is helpful to the stable operation of the microgrid.

A Hybrid Energy Storage System Based on Metal Hydrides for Solar Thermal Power and Energy Systems

2016 ◽  
Author(s):  
Shahin Shafiee ◽  
Mary Helen McCay
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Storage Systems ◽  
Storage System ◽  
Metal Hydrides ◽  
Energy Storage System ◽  
Solar Thermal ◽  
Thermal Mass ◽  
Thermal System ◽  
Solar Thermal System

Thermal storage in an important operational aspect of a solar thermal system which enables it to deliver power or energy when there is no sunlight available. Current thermal storage systems in solar thermal systems work based on transferring the generated heat from sunlight to a thermal mass material in an insulated reservoir and then withdraw it during dark hours. Some common thermal mass materials are stone, concrete, water, pressurized steam, phase changing materials, and molten salts. In the current paper, a hybrid thermal energy storage system which is based on two metal hydrides is proposed for a solar thermal system. The two hydrides which are considered for this system are magnesium hydride and lanthanum nickel. Although metal hydride Energy Storage Systems (ESS) suffer from slow response time which restricts them as a practical option for frequency regulation, off peak shaving and power supply stabilization; they can still demonstrate significant flexibility and good energy capacity. These specifications make them good candidates for thermal energy storage which are applicable to any capacity of a solar thermal system just by changing the size of the ESS unit.

Sign in / Sign up

Export Citation Format

Share Document