Polymorphism in uranyl chelate complexes. Part 1. Differential scanning calorimetry, infrared spectra, and X-ray patterns of bis(1,1,1,5,5,5-hexafluoropentane-2,4-dionato)dioxo(trimethyl phosphate)uranium(VI)

1977 ◽  
pp. 1628 ◽  
Author(s):  
John H. Levy ◽  
A. Bruce Waugh
Keyword(s):  
Differential Scanning Calorimetry ◽  
Infrared Spectra ◽  
Trimethyl Phosphate ◽  
Chelate Complexes ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ray Patterns

Co-Amorphous Telmisartan-Pimelic Acid with Improved Solubility

2020 ◽  
Vol 993 ◽  
pp. 776-784
Author(s):  
Ze Xin Wu ◽  
Wen Zhe Ma ◽  
Lei Wang ◽  
Chang Lin Yao ◽  
Shuang Song ◽  
...  
Keyword(s):  
Differential Scanning Calorimetry ◽  
Infrared Spectra ◽  
Molar Ratio ◽  
Pimelic Acid ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Amorphous System ◽  
Grinding Method ◽  
Apparent Solubility

Telmisartan (TEL), a type of antihypertensive drug, has poor solubility. To improve its solubility, the co-amorphous telmisartan with pimelic acid (PA) in molar ratio of 1:1 and 2:1, respectively, were obtained using a liquid-assisted grinding method. The co-amorphous system was characterized by the powder X-ray diffraction and differential scanning calorimetry. The molecular interactions of the co-amorphous were studied by the infrared spectra. After the formation of co-amorphous, the solubility of TELwas much improved, and the apparent solubility values were approximately 9-15 times as high as that of crystalline TEL. Moreover, the co-amorphous TEL-PA was stored under 25 °C/20% RH for a month without any evidence of conversion by powder X-ray diffraction analysis.

A Study of the Interactions Between Oligoamidephosphate (OAPh) and Curatives in a Sulphenamide-Accelerated Sulphur Vulcanizing System

1999 ◽  
Vol 19 (2) ◽  
pp. 95-108 ◽  
Author(s):  
Todorka G. Vladkova ◽  
Alexander Chr. Alaminov ◽  
Milka G. Pankova
Keyword(s):  
Differential Scanning Calorimetry ◽  
Zinc Oxide ◽  
Ir Spectroscopy ◽  
Room Temperature ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Sulphur Vulcanization

Abstract The possible interactions between oligoamidephosphate (OAPli) and the curatives of a sulphenamide-accelerated sulphur vulcanizing system were studied by differential scanning calorimetry, IR-spectroscopy, and X-ray analysis. The interactions in double mixtures were between OAPh and zinc oxide (ZnO) and OAPh and sulphur. The OAPh/ZnO interaction that starts at room temperature seems to be the key for understanding the peculiarities of sulphenamide-accelerated sulphur vulcanization in the presence of OAPh.

Research on compatibility and surface of high impact bio-based polyamide

2021 ◽  
pp. 095400832110055
Author(s):  
Yang Wang ◽  
Yuhui Zhang ◽  
Yuhan Xu ◽  
Xiucai Liu ◽  
Weihong Guo
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
High Impact ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

The super-tough bio-based nylon was prepared by melt extrusion. In order to improve the compatibility between bio-based nylon and elastomer, the elastomer POE was grafted with maleic anhydride. Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) were used to study the compatibility and micro-distribution between super-tough bio-based nylon and toughened elastomers. The results of mechanical strength experiments show that the 20% content of POE-g-MAH has the best toughening effect. After toughening, the toughness of the super-tough nylon was significantly improved. The notched impact strength was 88 kJ/m2 increasing by 1700%, which was in line with the industrial super-tough nylon. X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) were used to study the crystallization behavior of bio-based PA56, and the effect of bio-based PA56 with high crystallinity on mechanical properties was analyzed from the microstructure.

The Sputter Deposition of Metal Multilayers

1987 ◽  
Vol 103 ◽  
Author(s):  
R. E. Somekh ◽  
R. J. Highmore ◽  
K. Page ◽  
R. J. Home ◽  
Z. H. Barber
Keyword(s):  
Differential Scanning Calorimetry ◽  
Sputter Deposition ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Monotonic Increase ◽  
Preliminary Work ◽  
Sputtering Pressure

ABSTRACTWe describe the strategy that we are using to make precision metal multilayers. Differential scanning calorimetry has been used with the Ni/Zr system to study the abruptness of the interface as a function of the sputtering pressure. For 10nm period multilayers there is a monotonic increase in the width of the interface with increasing sputtering pressure. W/Si multilayers have been studied as a function of both the sputtering pressure and the relative thicknesses of tungsten and silicon. At reasonably low sputtering pressures a well textured (110) tungsten X-ray peak is seen which is compatible with the expected thickness of the tungsten layers.Finally, we report some preliminary work on sputtering from tungsten and silicon targets which are at different distances from the substrate so that the degrees of bombardment on the growing layers of the film can be independently varied.

scholarly journals Synthesis and mesomorphic properties of calamitic malonates and cyanoacetates tethered to 4-cyanobiphenyls

2012 ◽  
Vol 8 ◽  
pp. 371-378 ◽  
Author(s):  
Katharina C Kress ◽  
Martin Kaller ◽  
Kirill V Axenov ◽  
Stefan Tussetschläger ◽  
Sabine Laschat
Keyword(s):  
Differential Scanning Calorimetry ◽  
Ambient Temperature ◽  
Liquid Crystalline ◽  
X Ray Diffraction ◽  
Cyanoacetic Acid ◽  
Scanning Calorimetry ◽  
Isotropic Liquid ◽  
X Ray ◽  
Nematic Phases ◽  
Mesomorphic Properties

4-Cyano-1,1'-biphenyl derivatives bearing ω-hydroxyalkyl substituents were reacted with methyl 3-chloro-3-oxopropionate or cyanoacetic acid, giving liquid-crystalline linear malonates and cyanoacetates. These compounds formed monotropic nematic phases at 62 °C down to ambient temperature upon cooling from the isotropic liquid. The mesomorphic properties were investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction (WAXS).

Sign in / Sign up

Export Citation Format

Share Document